Baer Extreme+ Brake System Rear (2005-2014 Mustang) - 4262237R

Brake Components Extreme+ Brake System Rear Pro+ RRS w park

Rear Brake Components Extreme+ Brake System Rear Pro+ RRS w park Pro+ RRS w park 6P Red Shelby SDZ With Currie 9 inch Ford rear axle conversion

Complete System, we pride ourselves on delivering complete and detail oriented performance brake solutions to our consumers. We do not cut any corners. To give an example of this, we assemble the hubs prior to sending them to you, installing all the bearings and races, packing them with Redline synthetic grease. When we send you your brake system, everything is already installed, all you have to do it bolt it onto the control arms.

Named by Hot Rod Magazine as one of 20 Speed Parts that Changed the World, Baer Brakes was the original innovator bringing racing brake performance and killer looks to all kinds of North American made cars and trucks. ?Today, that leadership continues through engineering design, innovation, and an unwavering commitment to bring complete solutions to their customers reaffirming Baer Brakes legacy as one of the great automotive aftermarket manufacturers.



PRODUCT NOTES:
Axle - Rear
Box Count - 2
Caliper - 6P Red Shelby
Export Description - Brake Components
Min Wheel Dia (verify using template) - 18in
Prop 65 - Long Label - WARNING: This product can expose you to chemicals including Toluene Diisocyanate, and Nickel which are known to the State of California to cause cancer. For more information, visit www.P65Warnings.ca.gov
Rotor Diameter - 14
Rotor Surface - SDZ
System Notes - With Currie 9 inch Ford rear axle conversion
Template - Q050P


Lethal Performance is proud to offer the entire line of products!
Learn More

This system features the 6S 6-piston Monoblock caliper mounted to a 15" 2 piece slot, drill, zinc plated rotor. Baer systems include stainless steel brake hoses as well as calipers that have D.O.T compliant dust and weather seals. The 6S and 6R (R-Spec) calipers are Baer's Flagship offering, and are built out of a single piece of US sourced 2618 forged aluminum. Rotor Size/Type: 15" 2-piece
Piston Count: 6 piston Monoblock
Pad Type: D1247 (also known as DR11)
Minimum Wheel Size: 19" (Use template to verify fitment, link below)
Includes: Stainless braided brake hoses
Notes: Designed to be used with 2013-2014 S197 GT500 Mustang Spindles. This system is designed for the GT500 with the stock Brembo 6 piston brake system.

Why Purchase the Extreme+?

US Made Forged MonoBlock caliper
Offers the exact same look front and rear. Baer is the only brake manufacturer that offers this!
Calipers have dust and weather seals
Proper banjo fittings (NOTE: Baer does not use any pipe thread fittings)
Everything needed per corner (including hoses and fittings) except for in General fit applications
6061 T-6 billet aluminum hat (anodized black) and bolted to the rotor
High grade U281 fine thread stainless hardware (with captured nuts). Rotor comes pre-assembled.
Includes a set of 6061-T6 billet machined hubs with Timken or SKF bearings installed. Hubs are pre-assembled with bearings, races, studs and packed with Redline synthetic grease.

The 6S Extreme+ Caliper Features:

The 6S/6R monoblock caliper is Baer's flagship offering, and machined out of a single piece of US sourced 2618 forged aluminum
The only 6 piston forged monoblock offered to the road-going/street market
Stainless steel pistons, abutments and noise suppression springs
Staggered piston sizes to minimize pad wear
Uses the common D1247 (DR11) race pad backing plate, that is shared by many other competition calipers.
Dual seals (dust/weather and pressure) to meet D.O.T specifications
Caliper can accept 13.5” to 16” rotors.
Machined logo that is hand painted
Red, Black or Silver Powder Coat Finish
Available in Front or Rear for that same cosmetic matching look
Rear systems incorporate a drum in hat park brake
Rear systems for c-clip style axles include Baer’s Verislide self centering brackets
Uses correct banjo style fittings, Baer does not use any pipe thread
100% MADE IN USA with US sourced materialLearn More

This system features the 6S 6-piston Monoblock caliper mounted to a 15" 2 piece slot, drill, zinc plated rotor. Baer systems include stainless steel brake hoses as well as calipers that have D.O.T compliant dust and weather seals. The 6S and 6R (R-Spec) calipers are Baer's Flagship offering, and are built out of a single piece of US sourced 2618 forged aluminum. Rotor Size/Type: 15" 2-piece
Piston Count: 6 piston Monoblock
Pad Type: D1247 (also known as DR11)
Minimum Wheel Size: 19" (Use template to verify fitment, link below)
Includes: Stainless braided brake hoses
Notes: Designed to be used with 2013-2014 S197 GT500 Mustang Spindles. This system is designed for the GT500 with the stock Brembo 6 piston brake system.

Why Purchase the Extreme+?

US Made Forged MonoBlock caliper
Offers the exact same look front and rear. Baer is the only brake manufacturer that offers this!
Calipers have dust and weather seals
Proper banjo fittings (NOTE: Baer does not use any pipe thread fittings)
Everything needed per corner (including hoses and fittings) except for in General fit applications
6061 T-6 billet aluminum hat (anodized black) and bolted to the rotor
High grade U281 fine thread stainless hardware (with captured nuts). Rotor comes pre-assembled.
Includes a set of 6061-T6 billet machined hubs with Timken or SKF bearings installed. Hubs are pre-assembled with bearings, races, studs and packed with Redline synthetic grease.

The 6S Extreme+ Caliper Features:

The 6S/6R monoblock caliper is Baer's flagship offering, and machined out of a single piece of US sourced 2618 forged aluminum
The only 6 piston forged monoblock offered to the road-going/street market
Stainless steel pistons, abutments and noise suppression springs
Staggered piston sizes to minimize pad wear
Uses the common D1247 (DR11) race pad backing plate, that is shared by many other competition calipers.
Dual seals (dust/weather and pressure) to meet D.O.T specifications
Caliper can accept 13.5” to 16” rotors.
Machined logo that is hand painted
Red, Black or Silver Powder Coat Finish
Available in Front or Rear for that same cosmetic matching look
Rear systems incorporate a drum in hat park brake
Rear systems for c-clip style axles include Baer’s Verislide self centering brackets
Uses correct banjo style fittings, Baer does not use any pipe thread
100% MADE IN USA with US sourced materialLearn More

This system features the 6S 6-piston Monoblock caliper mounted to a 15" 2 piece slot, drill, zinc plated rotor. Baer systems include stainless steel brake hoses as well as calipers that have D.O.T compliant dust and weather seals. The 6S and 6R (R-Spec) calipers are Baer's Flagship offering, and are built out of a single piece of US sourced 2618 forged aluminum. Rotor Size/Type: 15" 2-piece
Piston Count: 6 piston Monoblock
Pad Type: D1247 (also known as DR11)
Minimum Wheel Size: 19" (Use template to verify fitment, link below)
Includes: Stainless braided brake hoses
Notes: Designed to be used with 2013-2014 S197 GT500 Mustang Spindles. This system is designed for the GT500 with the stock Brembo 6 piston brake system.

Why Purchase the Extreme+?

US Made Forged MonoBlock caliper
Offers the exact same look front and rear. Baer is the only brake manufacturer that offers this!
Calipers have dust and weather seals
Proper banjo fittings (NOTE: Baer does not use any pipe thread fittings)
Everything needed per corner (including hoses and fittings) except for in General fit applications
6061 T-6 billet aluminum hat (anodized black) and bolted to the rotor
High grade U281 fine thread stainless hardware (with captured nuts). Rotor comes pre-assembled.
Includes a set of 6061-T6 billet machined hubs with Timken or SKF bearings installed. Hubs are pre-assembled with bearings, races, studs and packed with Redline synthetic grease.

The 6S Extreme+ Caliper Features:

The 6S/6R monoblock caliper is Baer's flagship offering, and machined out of a single piece of US sourced 2618 forged aluminum
The only 6 piston forged monoblock offered to the road-going/street market
Stainless steel pistons, abutments and noise suppression springs
Staggered piston sizes to minimize pad wear
Uses the common D1247 (DR11) race pad backing plate, that is shared by many other competition calipers.
Dual seals (dust/weather and pressure) to meet D.O.T specifications
Caliper can accept 13.5” to 16” rotors.
Machined logo that is hand painted
Red, Black or Silver Powder Coat Finish
Available in Front or Rear for that same cosmetic matching look
Rear systems incorporate a drum in hat park brake
Rear systems for c-clip style axles include Baer’s Verislide self centering brackets
Uses correct banjo style fittings, Baer does not use any pipe thread
100% MADE IN USA with US sourced materialLearn More