VR Tuned ECU Flash Tune Porsche Cayenne 958 Turbo 4.8L V8 11-13 - VRT-958-TT

If choosing Mail In Option. Please send to
Vivid Racing
attn: Tuning Order ( Vivid Racing PO# )
1429 W Scott Ave
Gilbert AZ 85233

VR Tuned ECU Flash Tune Porsche Cayenne 958 Turbo 4.8L V8 11-13 - VRT-958-TT

The Porsche Cayenne Turbo 958 chassis is a monster SUV with its V8 twin turbocharged engine. There is no question on the performance output that can be had. Like all other Porsche Turbos, the Cayenne is no different with the power increase and driveability performance that can be had. As we have seen on other Porsche Turbo vehicles, we can gain anywhere from 75+ reliable horsepower with just a flash. Improving the vehicles throttle response, reducing the turbo lag, and improving the pull throughout the RPM range is all part of enhancing the vehicle with an ECU tune.

Crank Horsepower Ratings:

• Stock Power 500HP | 516ft/lbs
• Tuned Power 575HP | 605ft/lbs

What are the benefits of VR Tuned?

• #1 priority is our customer service to you!
• Our tuning is used worldwide. We have powered vehicles of all types.
• All ECU tunes can be reverted back to stock if necessary.
• With the VR Tuned ECU Flash, basic bolt-on performance parts will not require a retune of your ECU.
• Adding parts such as an exhaust, intake, plenum, pulley, will all adjust with the tune.
• If you add higher octane fuel, the ECU will adjust accordingly.
• We can tune cars worldwide including JDM, EU, Australian, and USA cars for different types of octane or environments.
• Other custom enhancements are available if requested and applicable.
• We test and dyno tune on our own cars to make sure what you get is safe, reliable, and gives you the results you want!

How to Flash Your ECU?

• Use the DimSport handheld device. This REQUIRES a Windows PC.  You can flash between the stock and tuned at anytime. See Instructions Here.
• Bring your vehicle to our facility where we can use our Master Tool to flash your vehicle via the OBDII port.
• We can bench flash the ECU as long it is a SDI6 or SDI7 ECU. Some later model 2013 switched to SDI8 which cannot be bench flashed. To bench flash the ECU, you must remove it from your vehicle and send it to us. Once we receive the ECU, we will prepare the tune file and then ship it back to you for reinstallation. We do not solder or modify the ECU board at all. All ECU tuning is done via bungy probes that have a needle tip to provide an electrical connection. See ECU removal instructions here.

For reference, this ECU is a Siemens SDI6/7.

Lethal Performance is proud to offer the entire line of Vivid Racing products!