J&M Products is proud to release our completely redesigned fully adjustable protected under US Patent No. 8,820,759 and patents pending Camber & Caster plate assembly for the 2005-2010 Ford Mustangs. This Camber/Caster kits is the only kit that comes complete READY to bolt in right out of the box (no need to swap anything over from the factory mount). Whether you are using the car for street, autocross, road racing or drag racing these plates are designed for you. These are the only plates that have an offset design allowing for you to install them in the street orientation or a race orientation allowing for the most camber adjustment available compared to any other plate on the market. Just like our other Camber/Caster plates these come with a full lifetime warranty to the original purchaser of the product.

Benefits:

Allows for camber and caster adjustment not available from the factory
Allows you to align your Mustang back to factory specifications even when lowered over 2.5 inches.
Camber & caster are adjustable separately.
Offset design allows for either street use or race use alignments.
Provides for caster adjustment not found on the factory mounts
Caster adjustment to allow correction for OEM production tolerances.
Alignment is easily adjusted at the top of the strut tower.
Spherical bearing eliminates un-wanted deflection and precisely locates the strut shaft during cornering.
Completely assembled and bolts in with no need for extra drilling or cutting.
ONLY kit that includes everything needed to install all the way down to the rubber spring isolator.
Unlike competitors you don’t need to remove parts from the factory mount and install on our mount.

Product Features:

Over 2.5 degrees of camber adjustment, adjustable without affecting caster.
0.7 degrees of range of caster adjustment.
PTFE lined spherical bearing manufactured in the USA.
All parts are either plated or powder coated for great looks and long lasting protection.
Protected under US Patent No. 8,820,759 and patents pending.
Lifetime warranty on the entire camber plate to the original owner.Learn More

QA1 2011 Mustang Caster/Camber Plates

**THESE CC PLATES WILL ONLY WORK WITH QA1 FRONT STRUTS OR QA1 COILOVER KIT. THEY WILL NOT WORK WITH ANY OTHER STRUT INCLUDING THE STOCK ONES**

QA1 once again leads the industry by developing a specifically engineered asymmetric bearing for caster/camber plate applications. Through this innovative design, the bearing allows for improved load distribution that significantly reduces wear and increases durability eliminating "sloppy bearings" which result in road noise and poor handling characteristics.

QA1’s high quality caster/camber plates for race applications offer many features not found in other brands. For example, the bearing housing is tig-welded for the utmost in strength and durability. This kit provides caster and camber changes for the ultimate in adjustability.

Fitment: Will only work with QA1 front struts (part # H2004 or H 2011 ) and QA1 coil over kit (part # MU150, MU175, MU200, MU225 or MU250).

Learn More

2005-2014 Mustang Caster/Camber Kit

Benefits
Eliminates flexible strut mount bushings
Allows adjustments to caster & camber
Increases high speed stability

Use of This Kit Will Resonate Noise
It is not recommended for street use

Features
• Zinc plated bearing plates
• Powder coated lower plates
• Teflon® lined bearings
• Steel bushings & spacers
• Zinc plated bolts, nuts, & washers Learn More

These KellTrac S197 Mustang Caster Camber Plates for 2005-2014 Mustangs are necessary for the installation and proper alignment of coilover kits that utilize a 5/8" shaft.

FEATURES:
-CNC Machining for Superior Design
-Hard coated Black for durability and corrosion resistance
-Precision fitment for maximized performance
-Minimal NoiseVibrationHarshness Increase

BENEFITS:
-Allows installation of coilovers
-Allows proper alignment to be achieved
-Reduces Strut Mount Deflection Learn More

Maximum Motorsports 05-09 Mustang Caster Camber Plates

Lowered Mustangs
Lowering your Mustang will cause the top of the front tires to lean in towards the center of the car, resulting in rapid and/or uneven tire wear. This excessive negative camber can be easily corrected with the Maximum Motorsports Caster/Camber Plates. Even a Mustang lowered as much as 2.5 inches can still be aligned to factory specifications.

Bolts on! No drilling or cutting required.

1.6-degree continuous range of camber adjustment provides alignment correction on lowered cars, and is adjustable without affecting caster.

0.7-degree continuous range of caster adjustment provides correction for OEM production tolerances.

Caster and camber are easily adjusted at the top of the strut tower.

The range of suspension travel can be shifted, allowing for additional bump travel on lowered cars. Teflon lined spherical bearing eliminates deflection and precisely locates the strut shaft, while still allowing the required articulation.

High-tech composite thrust bearing transfers the spring load into the strut tower.

All parts are either plated or powder coated for great looks and long lasting protection.

Warranty: Maximum Motorsports Caster/Camber Plates part #Mm5CC-1 have a limited lifetime warranty against spherical bearing failure or plate failure. That's right - If you wear out the spherical bearing, or break the plates while driving, we will replace that component for free. This warranty applies to the original retail purchaser of genuine MM Caster/Camber Plates. Learn More

BMR Caster Camber Plates - Black Hammertone (2011-2014 Mustang) - WAK751HLearn More

BMR Caster Camber Plates - Black Hammertone (2011-2014 Mustang) - WAK751HLearn More