This replacement oil separator filter works with all Steeda oil separators. This filter is easy to install and will keep your oil separator working like new.

Steeda's oil separator kit reduces detonation, oil burning and deposits on the valves by removing oil drawn through the PCV system before it can contaminate the intake charge.

Excess crankcase pressure (sometimes known as "blow-by") is vented from the crankcase through the PCV system, where it is drawn into the intake manifold and returned by the engine. This recirculated air contains aerated oil from the crankcase which is burned by the engine. Supercharged, nitrous-boosted and high mileage engines often draw excessive amounts of oil into the engine through the PCV system. The Steeda oil separator plugs into the PCV hose between the PCV valve and the intake manifold and removes aerated oil from the recirculated air and collects it in a tube that can be drained and recycled.

Oil separator kits include the oil separator and required hardware. For 04-earlier applications connecting hose is included.

Features
Originally Designed for the 2007 GT500, this kit features a clear bowl and is design for a 1/2" PCV system.

Note: 2005 and Up applications require modifying factory PVC hoses.

Warning: Not approved for sale in California or states that require a California E.O. #. This part has been designed and is intended for off-road application only. Installation of this part on a vehicle that is driven on public roads may violate U.S. and Canadian laws and regulations.

Note: Federal and several state and provincial laws prohibit the removal, modification or rendering inoperative of any part that affects emissions or safety on motor vehicles used on public streets or highways. Steeda Autosports assumes no liability for any violations arising out of any federal, state or provincial emissions or safety requirements on motor vehicles arising out of the customer's modifications and/or use of Steeda products. It is the responsibility of the customer to determine if their modified vehicle complies with applicable laws.

This limited warranty is the only express warranty applicable to Steeda Autosports products. Other rights may arise or vary from state to state in the United States. Steeda is not responsible for any time for which you may lose the use of your vehicle, any inconvenience you might be caused, the loss of your transportation or any part thereof, or any other incidental or consequential damages you may have.

Steeda's oil separator kit reduces detonation, oil burning and deposits on the valves by removing oil drawn through the PCV system before it can contaminate the intake charge. Originally designed for the '03-'04 Cobras, this kit features a clear bowl and is designed for a 3/8" and 1/2" PCV system. Mounting bracket included.

Excess crankcase pressure (sometimes known as "blow-by") is vented from the crankcase through the PCV system, where it is drawn into the intake manifold and returned by the engine. This re circulated air contains aerated oil from the crankcase which is burned by the engine. Supercharged, nitrous-boosted and high mileage engines often draw excessive amounts of oil into the engine through the PCV system. The Steeda oil separator plugs into the PCV hose between the PCV valve and the intake manifold and removes aerated oil from the re circulated air and collects it in a tube that can be drained and recycled.

Oil separator kits include the oil separator and required hardware. For 04-earlier applications connecting hose is included.

Features
Originally designed for the 03/04 Cobra's, this kit features a clear bowl and is designed for a 3/8" and now a 1/2" PCV system. Mounting bracket included.

Fits any 3/8" and 1/2" PCV/vacuum system

Warning: Not approved for sale in California or states that require a California E.O. #. This part has been designed and is intended for off-road application only. Installation of this part on a vehicle that is driven on public roads may violate U.S. and Canadian laws and regulations.

Note: Federal and several state and provincial laws prohibit the removal, modification or rendering inoperative of any part that affects emissions or safety on motor vehicles used on public streets or highways. Steeda Autosports assumes no liability for any violations arising out of any federal, state or provincial emissions or safety requirements on motor vehicles arising out of the customer's modifications and/or use of Steeda products. It is the responsibility of the customer to determine if their modified vehicle complies with applicable laws.

This limited warranty is the only express warranty applicable to Steeda Autosports products. Other rights may arise or vary from state to state in the United States. Steeda is not responsible for any time for which you may lose the use of your vehicle, any inconvenience you might be caused, the loss of your transportation or any part thereof, or any other incidental or consequential damages you may have.

Metco Motorsports Valve Cover Breather

 2003-2004 Mustang Cobra, 2007 & Newer Shelby GT500, Mercury Marauder

An Original Metco Motorsports Design!

This valve cover breather assembly replaces the original oil fill cap found on the driver's side valve cover on the supercharged Cobra and Shelby GT500 applications.

The base of the breather is CNC-machined from billet aluminum for a precise fit, and the included silicone O-ring is specially designed to prevent seepage at the base of the filter.  The filter base is microfinished for surface protection and good looks, and is easily hand-polished to a mirror-like appearance.  The removeable filter element is a high-quality reusable unit from S & B Filters, and the filter is securely retained to the filter base by a specially-machined retention groove in the top of the filter base.

The purpose of this valve cover breather is to vent unwanted accumulation of pressure in the crankcase, and to provide maximum circulation of ambient air in the crankcase to reduce oil temperatures.  The installation of this breather will contribute to increased engine oil life and reduce the possibility of failed engine seals resulting from excessive crankcase pressure.  This breather will reduce the effectiveness of the vehicle's PCV system, and it is not emissions-legal.

Note 1:  This breather will not fit the New Edge Mach 1 4V application due to inadequate hood clearance.

Note 2:

  This breather stand is also available with a male #10AN connection at the top instead of the provision for the breather element.  This configuration is designed for use in a custom crankcase evacuation system or for use with a vacuum pump.  Please see PN MBR0004-10AN listed elsewhere in this section.