Accufab offers high performance throttle bodies and spacers for your 1986-1993 Ford 5.0L Mustang. Replace your restrictive stock throttle body with one of our top of the line units and get your 5.0L the air it's lacking.

Better Air Flow for More Power: This upgrade will improve your Mustangs throttle response and horsepower. It's the perfect starting point for future modifications. In addition, spacers are offered as an option in combination with our throttle bodies.

Exceptional Quality: Accufab throttle bodies and spacers are CNC machined from 6061-T6 billet aluminum and the exterior is polished to an eye-catching finish. The shafts are also CNC machined from stainless for durability and quality, with brass blades and the highest quality bushings, bearings and screws. Manufactured in the USA.

Available Versions: Accufab's 65mm throttle body is available in Standard and Race versions.

Application: This 65mm Accufab throttle body and throttle body in combination with spacer is specifically designed as a direct bolt on for use on the 1986 - 1993 Ford Mustang 5.0L.

Technical Notes: Idle speed should only be set by adjusting the throttle position sensor. DO NOT adjust any screws on the throttle body. These screws are pre-set at Accufab.

Accessories Included: The throttle body gasket, IAC gasket and EGR gaskets are included where applicable. No mounting hardware available.

Learn More

Accufab’s Mustang 105mm throttle body V-Band requires a 4.5″ V-Band Clamp and 4.5″ Weld Ferrule, sold separately or we offer all parts needed in a kit. Please select this option from the drop down menu when ordering. Features: Full body stainless steel shaft, 3 position linkage arm with threaded ball stud, linkage arm is hard anodized black, with Idle Air Control provision, O-ring Groove seal on the back, and Sealed and Air Leak resistant up to 100 psi. All the 105mm versions measure 105mm at the blade and each has a 4.5″ inlet. There is no vacuum elbow and 4.5″ v-band clamp is required. Better Air Flow for More Power: This 105mm upgrade will improve your Mustangs throttle response and horsepower. It’s the perfect starting point for future modifications. Exceptional Quality. This part is CNC machined from 6061-T6 billet aluminum and the exterior is polished to an eye-catching finish. The shafts are also CNC machined from stainless for durability and quality, with brass blades and the highest quality bushings, bearings and screws. Furthermore, the 105mm features a split shaft design which helps prevent the shaft from breaking under intense pressure. Manufactured in the USA. Application: This Accufab 105mm V-Band single blade throttle body is specifically designed for use on the 1986 – 1993 Ford Mustang 5.0L. Technical Notes: Idle speed should only be set by adjusting the throttle position sensor. DO NOT adjust any screws on the throttle body. These screws are pre-set at Accufab.

Accessories Included: The throttle body O-RING and ball stud, plus an IAC gasket are included. No mounting hardware available.

Accufab has several optional accessories to help adapt an Accufab 5.0L Ford style throttle body to be used with GM electronics instead of Ford electronics. For example, we offer a TPS adapter to use your GM TPS (Throttle Position Sensor) or an IAC (Idle Air Control) adapter to use your GM IAC. If you need to relocate the IAC or block it off all together, we have developed parts to help accomplish these goals. Click here > Mustang 5.0L Throtlle Body Guide CFM Air Flow – Throttle BodiesLearn More

Accufab’s Mustang 105mm throttle body V-Band requires a 4.5″ V-Band Clamp and 4.5″ Weld Ferrule, sold separately or we offer all parts needed in a kit. Please select this option from the drop down menu when ordering. Features: Full body stainless steel shaft, 3 position linkage arm with threaded ball stud, linkage arm is hard anodized black, with Idle Air Control provision, O-ring Groove seal on the back, and Sealed and Air Leak resistant up to 100 psi. All the 105mm versions measure 105mm at the blade and each has a 4.5″ inlet. There is no vacuum elbow and 4.5″ v-band clamp is required. Better Air Flow for More Power: This 105mm upgrade will improve your Mustangs throttle response and horsepower. It’s the perfect starting point for future modifications. Exceptional Quality. This part is CNC machined from 6061-T6 billet aluminum and the exterior is polished to an eye-catching finish. The shafts are also CNC machined from stainless for durability and quality, with brass blades and the highest quality bushings, bearings and screws. Furthermore, the 105mm features a split shaft design which helps prevent the shaft from breaking under intense pressure. Manufactured in the USA. Application: This Accufab 105mm V-Band single blade throttle body is specifically designed for use on the 1986 – 1993 Ford Mustang 5.0L. Technical Notes: Idle speed should only be set by adjusting the throttle position sensor. DO NOT adjust any screws on the throttle body. These screws are pre-set at Accufab.

Accessories Included: The throttle body O-RING and ball stud, plus an IAC gasket are included. No mounting hardware available.

Accufab has several optional accessories to help adapt an Accufab 5.0L Ford style throttle body to be used with GM electronics instead of Ford electronics. For example, we offer a TPS adapter to use your GM TPS (Throttle Position Sensor) or an IAC (Idle Air Control) adapter to use your GM IAC. If you need to relocate the IAC or block it off all together, we have developed parts to help accomplish these goals. Click here > Mustang 5.0L Throtlle Body Guide CFM Air Flow – Throttle BodiesLearn More

Accufab’s Mustang 105mm throttle body V-Band requires a 4.5″ V-Band Clamp and 4.5″ Weld Ferrule, sold separately or we offer all parts needed in a kit. Please select this option from the drop down menu when ordering. Features: Full body stainless steel shaft, 3 position linkage arm with threaded ball stud, linkage arm is hard anodized black, with Idle Air Control provision, O-ring Groove seal on the back, and Sealed and Air Leak resistant up to 100 psi. All the 105mm versions measure 105mm at the blade and each has a 4.5″ inlet. There is no vacuum elbow and 4.5″ v-band clamp is required. Better Air Flow for More Power: This 105mm upgrade will improve your Mustangs throttle response and horsepower. It’s the perfect starting point for future modifications. Exceptional Quality. This part is CNC machined from 6061-T6 billet aluminum and the exterior is polished to an eye-catching finish. The shafts are also CNC machined from stainless for durability and quality, with brass blades and the highest quality bushings, bearings and screws. Furthermore, the 105mm features a split shaft design which helps prevent the shaft from breaking under intense pressure. Manufactured in the USA. Application: This Accufab 105mm V-Band single blade throttle body is specifically designed for use on the 1986 – 1993 Ford Mustang 5.0L. Technical Notes: Idle speed should only be set by adjusting the throttle position sensor. DO NOT adjust any screws on the throttle body. These screws are pre-set at Accufab.

Accessories Included: The throttle body O-RING and ball stud, plus an IAC gasket are included. No mounting hardware available.

Accufab has several optional accessories to help adapt an Accufab 5.0L Ford style throttle body to be used with GM electronics instead of Ford electronics. For example, we offer a TPS adapter to use your GM TPS (Throttle Position Sensor) or an IAC (Idle Air Control) adapter to use your GM IAC. If you need to relocate the IAC or block it off all together, we have developed parts to help accomplish these goals. Click here > Mustang 5.0L Throtlle Body Guide CFM Air Flow – Throttle BodiesLearn More

Accufab offers a high performance throttle body and spacer for your 1986-1993 Ford 5.0L Mustang. Replace your restrictive stock throttle body with our top of the line unit and get your 5.0L the air it's lacking.

Available Versions: Accufab's standard 90mm throttle body is a race throttle body (Part numbers F90 and F90K). This throttle body is sealed and air leak resistant up to 100psi, features a hard black anodized 3 position linkage arm and an o-ring throttle body groove on the back.

Application: This Accufab 90mm throttle body, or 90mm throttle body in combination with spacer is specifically designed for use on the 1986 - 1993 Ford Mustang 5.0L. However, there is no IAC provision or vacuum elbow on part number F90 or F90K. Each has a 4" opening and requires 4" tubing. If your application requires use of an IAC, we offer an Idle Air Control Relocation Adapter (Part number IACR).

Better Air Flow for More Power: This 90mm upgrade will improve your Mustangs throttle response and horsepower. It's the perfect starting point for future modifications. In addition, spacers are offered as an option in combination with our throttle body.

Exceptional Quality: Accufab's quality is second to none! This throttle body is CNC machined from 6061-T6 billet aluminum and the exterior is polished to an eye-catching finish. The shafts are also full body and CNC machined from stainless steel for durability and quality, with brass blades and the highest quality bushings, bearings and screws. Manufactured in the USA.

Technical Notes: Idle speed should only be set by adjusting the throttle position sensor. DO NOT adjust any screws on the throttle body. These screws are pre-set at Accufab.

Accessories Included: Part number F90K includes one gasket for the 2" spacer.

Learn More

Accufab offers high performance throttle bodies and spacers for your 1986-1993 Ford 5.0L Mustang. Replace your restrictive stock throttle body with one of our top of the line units and get your 5.0L the air it's lacking.

Better Air Flow for More Power: This upgrade will improve your Mustangs throttle response and horsepower. It's the perfect starting point for future modifications. In addition, spacers are offered as an option in combination with our throttle bodies.

Exceptional Quality: Accufab throttle bodies and spacers are CNC machined from 6061-T6 billet aluminum and the exterior is polished to an eye-catching finish. The shafts are also CNC machined from stainless for durability and quality, with brass blades and the highest quality bushings, bearings and screws. Manufactured in the USA.

Available Versions: Accufab's 65mm throttle body is available in Standard and Race versions.

Application: This 65mm Accufab throttle body and throttle body in combination with spacer is specifically designed as a direct bolt on for use on the 1986 - 1993 Ford Mustang 5.0L.

Technical Notes: Idle speed should only be set by adjusting the throttle position sensor. DO NOT adjust any screws on the throttle body. These screws are pre-set at Accufab.

Accessories Included: The throttle body gasket, IAC gasket and EGR gaskets are included where applicable. No mounting hardware available.

Learn More

Accufab offers high performance throttle bodies and spacers for your 1986-1993 Ford 5.0L Mustang. Replace your restrictive stock throttle body with one of our top of the line units and get your 5.0L the air it's lacking.

Better Air Flow for More Power: This upgrade will improve your Mustangs throttle response and horsepower. It's the perfect starting point for future modifications. In addition, spacers are offered as an option in combination with our throttle bodies.

Exceptional Quality: Accufab throttle bodies and spacers are CNC machined from 6061-T6 billet aluminum and the exterior is polished to an eye-catching finish. The shafts are also CNC machined from stainless for durability and quality, with brass blades and the highest quality bushings, bearings and screws. Manufactured in the USA.

Available Versions: Accufab's 65mm throttle body is available in Standard and Race versions.

Application: This 65mm Accufab throttle body and throttle body in combination with spacer is specifically designed as a direct bolt on for use on the 1986 - 1993 Ford Mustang 5.0L.

Technical Notes: Idle speed should only be set by adjusting the throttle position sensor. DO NOT adjust any screws on the throttle body. These screws are pre-set at Accufab.

Accessories Included: The throttle body gasket, IAC gasket and EGR gaskets are included where applicable. No mounting hardware available.

Learn More

Accufab offers high performance throttle bodies and spacers for your 1986-1993 Ford 5.0L Mustang. Replace your restrictive stock throttle body with one of our top of the line units and get your 5.0L the air it's lacking.

Better Air Flow for More Power: This upgrade will improve your Mustangs throttle response and horsepower. It's the perfect starting point for future modifications. In addition, spacers are offered as an option in combination with our throttle bodies.

Exceptional Quality: Accufab throttle bodies and spacers are CNC machined from 6061-T6 billet aluminum and the exterior is polished to an eye-catching finish. The shafts are also CNC machined from stainless for durability and quality, with brass blades and the highest quality bushings, bearings and screws. Manufactured in the USA.

Available Versions: Accufab's 65mm throttle body is available in Standard and Race versions.

Application: This 65mm Accufab throttle body and throttle body in combination with spacer is specifically designed as a direct bolt on for use on the 1986 - 1993 Ford Mustang 5.0L.

Technical Notes: Idle speed should only be set by adjusting the throttle position sensor. DO NOT adjust any screws on the throttle body. These screws are pre-set at Accufab.

Accessories Included: The throttle body gasket, IAC gasket and EGR gaskets are included where applicable. No mounting hardware available.

Learn More