AeroForce Wideband Air/Fuel Sensor Kit

The Aeroforce wideband air/fuel kit comes with the following:

Digital 12 volt Wideband Controller Unit LSU4.9 Wideband Oxygen Sensor 10 ft. Sensor Wire Harness 5 ft. Control Unit to Gauge Wire Harness 5 ft. Power Wire Harness Weld- In Sensor Bung Full instructions and technical support

Now you can easily monitor and log air/fuel ratio on your Aeroforce gauge or other data logging device with our affordable wideband air/fuel kit. Accurate to 0.1 A/F point allowing you to accurately monitor your engine tune or PCM calibration. According to Bosch, due to the improved sensing element design the LSU4.9 shows higher lifetime robustness over the LSU4.2 This means it generally will have a longer life span and deliver more accurate readings. This sensor draws less power and has some advantages in high flow situations. It can be used in diesel applications as well, the 4.2 is not designed for this.

Aeroforce 5v Regulated Power Supply

Simply connects to switched 12v and ground to supply 5v to our sensor kits. Eliminates the need to tap into other sensor wires or the PCM.

Aeroforce 2000 psi Nitrous Sensor Kit

The nitrous sensor listed below are high accuracy units with 0.5 to 4.5v output which is compatible with our gauges. For those who already have an Aeroforce gauge these provide an inexepensive and easier alternative to buying and installing separate gauges for these functions. Sensor has a 1/8" NPT fitting.

2000 psi sensor with 12" pigtail:
- Reads 0-2000 psig
- 0.5% accuracy (10 psi)

AeroForce 2 Bar MAP Boost/Vacuum Sensor Kit

This sensor kit is an OEM quality unit with 0-5v outputs which is compatible with our gauges. For those who already have an Aeroforce gauge these provide an inexepensive and easier alternative to buying and installing separate gauges for these functions.

This sensor kits also contains an OEM sensor with 0-5v output and correct weathertight connector and pigtail. 5 bar sensor has a male 3/8" NPT fitting. These sensors can be used on an any vehicle.

AeroForce 3.5 Bar MAP Boost/Vacuum Sensor Kit

This sensor kit is an OEM quality unit with 0-5v outputs which is compatible with our gauges. For those who already have an Aeroforce gauge these provide an inexepensive and easier alternative to buying and installing separate gauges for these functions.

This sensor kits also contains an OEM sensor with 0-5v output and correct weathertight connector and pigtail. 5 bar sensor has a male 3/8" NPT fitting. These sensors can be used on an any vehicle.

Gauges come configured with a black face and black bezel with an included white face. Additional optional hardware such as silver face or brushed aluminum bezel can be ordered here.

NOTE: Dual gauge orders require two faces and or 2 bezels

*These faces only work on the latest hardware. They will not work on the old style gauges with unremovable bezels.

AeroForce gauges come standard with a black bezel out of the box. Further customize your AeroForce gauge with polished or silver anodized bezels.

NOTE: Dual gauge orders require two faces and or 2 bezels

For those who already have an Aeroforce gauge these provide an inexepensive and easier alternative to buying and installing separate gauges for these functions. Both sensors have a range of 150 psi and come with the proper mating connector and 5' pigtail. They have a 1/8" male NPT fitting. These sensors use a constant 12v power source, so they are included with a 12v regulator as the variable voltage system on todays vehicles will not power the sensor properly. We also carry -4 adapters to help with fuel pressure installation.