Call us for help 1.877.253.8425 or 1.561.753.8105
Currently Shopping by:
You have no items in your shopping cart.
The Steeda MaxFlow Open Cold Air Intake maximizes the potential of your induction system. Designed by Steeda engineers and put to the test with real track time, this intake will give your S550 an edge. The vehicle-specific design makes use of the factory air duct and draws in fresh and dense air. A roto-molded airbox assembly shields the intake from the hot air of the engine bay and makes sure your 5.0L engine is making peak power. Engineered using CFD (computational fluid dynamics) the intake has been optimized for airflow. Smooth bends and curves in the intake, combined with a high-flow nanofiber mesh air filter, ensure unrestricted airflow. The filter attaches to a specially designed bellmouth velocity stack that helps to draw in a larger volume of air and increase the speed of air getting pulled into your engine. Steeda's 114mm mass airflow housing is built into the intake tube and generates a clean signal for smooth throttle response and outstanding drivability.
The attention to detail that was put into designing this kit is unlike that of any other brand. Steeda went the extra mile to design the kit to work with the Gen 3 Coyote engine covers so that there is no need to modify or cut the cover. This allows you to maintain that clean look that the stock engine bay has. You have the option to delete the sound tube that sends intake noise into the cabin or delete the sound tube for a quieter cabin.
If you are looking for an intake system that is designed for your S550 by real racers, enthusiasts, and owners of Mustangs, this is the kit for you. Designed, engineered, and manufactured in-house, right here in the USA. With over 30 years of experience racing and building performance parts for Mustangs, you can be sure that Steeda is the name you can trust.
Warning: Not approved for sale in California or states that require a California E.O. #. This part has been designed and is intended for off-road applications only. Installation of this part on a vehicle that is driven on public roads may violate U.S. and Canadian laws and regulations.
Note: Federal and several state and provincial laws prohibit the removal, modification or rendering inoperative of any part that affects emissions or safety on motor vehicles used on public streets or highways. Steeda Autosports assumes no liability for any violations arising out of any federal, state or provincial emissions or safety requirements on motor vehicles arising out of the customer's modifications and/or use of Steeda products. It is the responsibility of the customer to determine if their modified vehicle complies with applicable laws.
This limited warranty is the only express warranty applicable to Steeda Autosports products. Other rights may arise or vary from state to state in the United States. Steeda is not responsible for any time for which you may lose the use of your vehicle, any inconvenience you might be caused, the loss of your transportation or any part thereof, or any other incidental or consequential damages you may have.
Horsepower per dollar, Steeda's S550 Mustang GT MaxFlow Closed Cold Air Intake is the best choice for stock intake manifold 2015+ Coyote powered Mustangs. Steeda MaxFlow Mustang Cold Air Intake for your S550 opens up the induction system of Ford's 5.0 powerplant and allows it to breathe much more freely than the stock intake system allows, taking your S550 Mustang GT to the highest level of performance. The system comes with an oiled reusable high flow panel filter and a high flow dry filter is available separately.
Warning: Not approved for sale in California or states that require a California E.O. #. This part has been designed and is intended for off-road application only. Installation of this part on a vehicle that is driven on public roads may violate U.S. and Canadian laws and regulations.
Note: Federal and several state and provincial laws prohibit the removal, modification or rendering inoperative of any part that affects emissions or safety on motor vehicles used on public streets or highways. Steeda Autosports assumes no liability for any violations arising out of any federal, state or provincial emissions or safety requirements on motor vehicles arising out of the customer's modifications and/or use of Steeda products. It is the responsibility of the customer to determine if their modified vehicle complies with applicable laws. This limited warranty is the only express warranty applicable to Steeda Autosports products. Other rights may arise or vary from state to state in the United States. Steeda is not responsible for any time for which you may lose the use of your vehicle, any inconvenience you might be caused, the loss of your transportation or any part thereof, or any other incidental or consequential damages you may have.
The Steeda MaxFlow Open Cold Air Intake maximizes the potential of your induction system. Designed by Steeda engineers and put to the test with real track time, this intake will give your S550 an edge. The vehicle-specific design makes use of the factory air duct and draws in fresh and dense air. A roto-molded airbox assembly shields the intake from the hot air of the engine bay and makes sure your 5.0L engine is making peak power. Engineered using CFD (computational fluid dynamics) the intake has been optimized for airflow. Smooth bends and curves in the intake, combined with a high-flow nanofiber mesh air filter, ensure unrestricted airflow. The filter attaches to a specially designed bellmouth velocity stack that helps to draw in a larger volume of air and increase the speed of air getting pulled into your engine. Steeda's 114mm mass airflow housing is built into the intake tube and generates a clean signal for smooth throttle response and outstanding drivability.
The attention to detail that was put into designing this kit is unlike that of any other brand. Steeda went the extra mile to design the kit to work with the Gen 3 Coyote engine covers so that there is no need to modify or cut the cover. This allows you to maintain that clean look that the stock engine bay has. You have the option to delete the sound tube that sends intake noise into the cabin or delete the sound tube for a quieter cabin.
If you are looking for an intake system that is designed for your S550 by real racers, enthusiasts, and owners of Mustangs, this is the kit for you. Designed, engineered, and manufactured in-house, right here in the USA. With over 30 years of experience racing and building performance parts for Mustangs, you can be sure that Steeda is the name you can trust.
Warning: Not approved for sale in California or states that require a California E.O. #. This part has been designed and is intended for off-road applications only. Installation of this part on a vehicle that is driven on public roads may violate U.S. and Canadian laws and regulations.
Note: Federal and several state and provincial laws prohibit the removal, modification or rendering inoperative of any part that affects emissions or safety on motor vehicles used on public streets or highways. Steeda Autosports assumes no liability for any violations arising out of any federal, state or provincial emissions or safety requirements on motor vehicles arising out of the customer's modifications and/or use of Steeda products. It is the responsibility of the customer to determine if their modified vehicle complies with applicable laws.
This limited warranty is the only express warranty applicable to Steeda Autosports products. Other rights may arise or vary from state to state in the United States. Steeda is not responsible for any time for which you may lose the use of your vehicle, any inconvenience you might be caused, the loss of your transportation or any part thereof, or any other incidental or consequential damages you may have.
Check out this brand new enclosed cold air intake system from Corsa Performance!
You're guaranteed to get the coldest, freshest air, because you're not relying on a seal from the hood anymore. This system provides a completely enclosed and insulated intake track from the outside of your car straight into the engine.
This intake can give you up to 20hp and 11lbs ft of torque.
This particular intake kit comes with the red, oiled filter.
The Corsa Performance 2018+ Mustang GT Closed box air intake features rotomolded construction and is designed for unparalleled aesthetics and maximum performance. The Mustang GT intake comes in two high-performance filtration options including Dry Tech 3D no-oil filtration or Corsa's MaxFlow 5, 5 layered oil cotton gauze air filter.
With its generous oversized air filter, with inverted cone technology, the air intake outflows the stock intake by nearly 20%, creating up to 20HP and 11Lbs Ft of Torque.
Check out this brand new enclosed cold air intake system from Corsa Performance!
You're guaranteed to get the coldest, freshest air, because you're not relying on a seal from the hood anymore. This system provides a completely enclosed and insulated intake track from the outside of your car straight into the engine.
This intake can give you up to 20hp and 11lbs ft of torque.
This particular intake kit comes with the red, oiled filter.
The Corsa Performance 2018+ Mustang GT Closed box air intake features rotomolded construction and is designed for unparalleled aesthetics and maximum performance. The Mustang GT intake comes in two high-performance filtration options including Dry Tech 3D no-oil filtration or Corsa's MaxFlow 5, 5 layered oil cotton gauze air filter.
With its generous oversized air filter, with inverted cone technology, the air intake outflows the stock intake by nearly 20%, creating up to 20HP and 11Lbs Ft of Torque.
2018-2020 Mustang GT 5.0 Cold Air Kit. Black MAF Housing. Up to 20 whp gain; No Tune Required; Includes Calibrated PMAS Mass Air Flow Sensor.
2018-2020 Mustang GT 5.0 Cold Air Kit. Black MAF Housing. Up to 20 whp gain; No Tune Required; Includes Calibrated PMAS Mass Air Flow Sensor.
SKU:CMG-C15596
SKU:BIL-26-219974
One of the best ways to restore balance to ourselves and prepare for a daunting task is to take a moment to breathe in some fresh air. That's why you need a 2018 or 2019 Mustang GT cold air intake to allow your ride to give 100% on the road. Whether you're competing in a crucial race or cruising the highways on your day off, a cold air intake system allows you to keep the airflow in your engine cool and constantly moving to optimize your horsepower, fuel mileage and torque. From AEM and Whipple Supercharger to PMAS and Roush, you won't find a better selection of 2018 and 2019 Mustang cold air intake systems from top-rated brands. So, chill out — Lethal Performance has you covered. Order now!
