DETAILS:
This intake system's integrated design makes it look like it belongs under the hood. But, its race-inspired styling, along with our motorsport logo, make it proper for the Coyote.

Dyno-Proven Gains up to +11 HP and +10 Lbs. x Ft. TQ
Outflows Factory Intake by 19%
Measured Flow: 595 CFM @ 7” H20
Durable One-Piece XLPE Housing Captures Air Directly from the Front of the Vehicle
Washable and Reusable Pro DRY S Air Filter for Maximum Convenience
Clear Sight Window for Convenient Filter Inspection Without Disassembly
Innovative Filter-to-Housing Interface and Minimal Hardware for Fast and Easy Installation

Large Three Layer Performance Air Filter:
Momentum’s unique filter-to-housing interface was built to feature the largest air filter possible. This 8” tall 360-degree radial flow air filter features our oil-free Pro DRY S media with three layers of synthetic media for maximum convenience. Its progressive layering provides great filtration efficiency and dust holding capacity, while not requiring the use of oils. This media is best suited for street use. Its inverted top makes for more filter surface area, resulting in longer service intervals.

Unique One-Piece Housing:
The one-piece sealed housing, constructed of heat-resistant cross-linked polyethylene (XLPE), draws styling cues from the Mustang's body. It incorporates the OE air inlet with no additional hardware and features an auxiliary air inlet that captures additional air from the inner fender. Its patented filter-to-housing interface design minimizes the total number of parts, making for an easy installation. A large, clear sight window allows for hassle-free filter inspection, without having to disassemble your system.

Dyno-Tuned Intake Tube:
This system features a high quality, computer-designed, dyno-tuned intake tube to achieve maximum power gains while maintaining a perfect fit. Its XLPE material is heat soak resistant and extremely durable.

Premium Components:
Momentum GT intakes are designed with fewer parts for a fast and easy installation. This is a direct fit intake system that utilizes factory mounting points and requires no cutting or modifications. Premium T-bolt clamps, couplings, and all other hardware is included.

Emissions Disclaimer:
This product is not currently CARB exempt and is not available for purchase in California or for use on any vehicle registered with the California Department of Motor Vehicles.Learn More

DETAILS:
This intake system's integrated design makes it look like it belongs under the hood. But, its race-inspired styling, along with our motorsport logo, make it proper for the Coyote.

Dyno-Proven Gains up to +18 HP and +15 Lbs. x Ft. TQ
Outflows Factory Intake by 28%
Measured Flow: 635 CFM @ 7” H20
Durable One-Piece XLPE Housing Captures Air Directly from the Front of the Vehicle
Washable and Reusable Pro 5R Air Filter for Maximum Performance
Clear Sight Window for Convenient Filter Inspection Without Disassembly
Innovative Filter-to-Housing Interface and Minimal Hardware for Fast and Easy Installation

Large Five Layer Performance Air Filter:
Momentum’s innovative filter-to-housing interface was built to feature the largest air filter possible. This 8” tall 360-degree radial flow air filter features our pre-oiled Pro 5R media with five layers of progressively finer cotton gauze media for maximum performance. Our Pro 5R media provides your engine with the largest amount of high-flowing air, usually resulting in the highest power gains out of all our filter media options. This media is perfect for street and/or track use. Its inverted top makes for more filter surface area, resulting in longer service intervals.

Unique One-Piece Housing:
The one-piece sealed housing, constructed of heat-resistant cross-linked polyethylene (XLPE), draws styling cues from the Mustang's body. It incorporates the OE air inlet with no additional hardware and features an auxiliary air inlet that captures additional air from the inner fender. Its patented filter-to-housing interface design minimizes the total number of parts, making for an easy installation. A large, clear sight window allows for hassle-free filter inspection, without having to disassemble your system.

Dyno-Tuned Intake Tube:
This system features a high quality, computer-designed, dyno-tuned intake tube to achieve maximum power gains while maintaining a perfect fit. Its XLPE material is heat soak resistant and extremely durable.

Premium Components:
Momentum GT intakes are designed with fewer parts for a fast and easy installation. This is a direct fit intake system that utilizes factory mounting points and requires no cutting or modifications. Premium T-bolt clamps, couplings, and all other hardware is included.

Emissions Disclaimer:
This product is not currently CARB exempt and is not available for purchase in California or for use on any vehicle registered with the California Department of Motor Vehicles.Learn More

DETAILS:
This intake system's race-inspired design flaunts an aggressive, oversized air filter and tube, delivering more cool air to your power-hungry engine.

Dyno-Proven Gains up to +14 HP and +11 Lbs. x Ft. TQ
Outflows Factory Intake by 43%
Measured Flow: 545 CFM @ 7” H2O
Open-Element Design Allows For Viewing of Massive Air Filter, Yet Seals When Hood is Closed to Keep Out Hot Air
Washable and Reusable Pro 5R Air Filter for Maximum Performance
Innovative Filter-to-Housing Interface and Minimal Hardware for Fast and Easy Installation (~ 30 Min.)
No Tuning Required

Large Five Layer Performance Air Filter:
This 7” tall 360-degree radial flow air filter features a 6" flange and our pre-oiled Pro 5R media with five layers of progressively finer cotton gauze media for maximum performance. It provides your engine with the largest amount of high-flowing air and delivers the highest power gains in most cases. This media is perfect for street and/or track use. Its inverted top makes for more filter surface area, resulting in longer service intervals.

One-Piece Housing:
The included massive air filter is surrounded by an open-element XLPE (cross-linked polyethylene) polymer housing that minimizes warm engine air for maximum performance. Its open design allows for easy viewing of the air filter, yet creates a heat-blocking seal when the vehicle's hood is closed. It utilizes the vehicle's OE air inlet with no additional hardware.

Dyno-Tuned Intake Tube:
This system features a high quality, computer-designed, dyno-tuned intake tube to achieve maximum power gains while maintaining a perfect fit. Its XLPE material is heat soak resistant and extremely durable. In addition to featuring all necessary fittings for the stock connections, it's the first tube designed with a molded version of our motorsport-inspired logo.

Hassle-Free Installation:
This is a direct fit intake system that utilizes factory mounting points and requires no cutting or modifications. All necessary clamps, couplings, and hardware are included. Its revolutionary design, featuring our innovative filter-to-housing interface, uses half the number of parts of a traditional cold air intake system.

Learn More

DETAILS:
This intake system's race-inspired design flaunts an aggressive, oversized air filter and tube, delivering more cool air to your power-hungry engine.

Dyno-Proven Gains up to +4 HP and +3 Lbs. x Ft. TQ
Outflows Factory Intake by 32%
Measured Flow: 500 CFM @ 7” H2O
Open-Element Design Allows For Viewing of Massive Air Filter, Yet Seals When Hood is Closed to Keep Out Hot Air
Washable and Reusable Pro DRY S Air Filter for Maximum Convenience
Innovative Filter-to-Housing Interface and Minimal Hardware for Fast and Easy Installation (~ 30 Min.)
No Tuning Required

Large Three Layer Performance Air Filter:
This 7” tall 360-degree radial flow air filter features a 6" flange and our oil-free Pro DRY S media with three layers of synthetic media for maximum convenience. Its progressive layering provides great filtration efficiency and dust holding capacity, while not requiring the use of oils. This media is best suited for street use.

One-Piece Housing:
The included massive air filter is surrounded by an open-element XLPE (cross-linked polyethylene) polymer housing that minimizes warm engine air for maximum performance. Its open design allows for easy viewing of the air filter, yet creates a heat-blocking seal when the vehicle's hood is closed. It utilizes the vehicle's OE air inlet with no additional hardware.

Dyno-Tuned Intake Tube:
This system features a high quality, computer-designed, dyno-tuned intake tube to achieve maximum power gains while maintaining a perfect fit. Its XLPE material is heat soak resistant and extremely durable. In addition to featuring all necessary fittings for the stock connections, it's the first tube designed with a molded version of our motorsport-inspired logo.

Hassle-Free Installation:
This is a direct fit intake system that utilizes factory mounting points and requires no cutting or modifications. All necessary clamps, couplings, and hardware are included. Its revolutionary design, featuring our innovative filter-to-housing interface, uses half the number of parts of a traditional cold air intake system.

Learn More

The Evolution of cold air intakes is here. The Evolution cold air intake system by Injen Technology is the next generation of performance intake systems. The EVO9202 is specifically engineered for the 2018-2019 Ford Mustang GT with the 5.0L engine. Every EVO9202 cold air intake is made in the USA from cross linked high density polyethylene for extreme durability. The box has a forward facing ram air scoop to provide fresh, clean air to your engine. This intake system also includes stainless steel hardware and automotive grade urethane couplers. No cutting or drilling is required for an easy installation process that does not require aftermarket tuning for exceptional HORSEPOWER and TORQUE GAINS.

Learn More

Product Features:
Increased horsepower
Heat shield with edge trim lining
Low restriction aluminum tubing
Air filter lasts up to 100,000 miles before cleaning is required (depending on driving conditions)
Washable and reusable oil-free filter media
AEM Lifetime Limited Warranty

Learn More

Product Overview
Guaranteed to increase horsepower
Designed to improve throttle response and engine sound
Free-flowing aluminum tube
Easy to install, usually in 90 minutes or less
Filter lasts up to 100,000 miles before service is required
Replaces entire factory air intake system
Washable and reusable lifetime air filter
K&N Million Mile Limited Warranty

Learn More

Product Overview
Guaranteed to increase horsepower
Designed to improve throttle response and engine sound
Washable and reusable air filter
Made from all black components
Lasts up to 100,000 miles before service is required (depending on driving conditions)
Easy to install, usually in 90 minutes or less
Washable and reusable lifetime air filter
K&N Million Mile Limited Warranty

Learn More