You have no items in your shopping cart.
Horsepower per dollar, Steeda's S550 Mustang GT MaxFlow Closed Cold Air Intake is the best choice for stock intake manifold 2015+ Coyote powered Mustangs. Steeda MaxFlow Mustang Cold Air Intake for your S550 opens up the induction system of Ford's 5.0 powerplant and allows it to breathe much more freely than the stock intake system allows, taking your S550 Mustang GT to the highest level of performance. The system comes with an oiled reusable high flow panel filter and a high flow dry filter is available separately.
Warning: Not approved for sale in California or states that require a California E.O. #. This part has been designed and is intended for off-road application only. Installation of this part on a vehicle that is driven on public roads may violate U.S. and Canadian laws and regulations.
Note: Federal and several state and provincial laws prohibit the removal, modification or rendering inoperative of any part that affects emissions or safety on motor vehicles used on public streets or highways. Steeda Autosports assumes no liability for any violations arising out of any federal, state or provincial emissions or safety requirements on motor vehicles arising out of the customer's modifications and/or use of Steeda products. It is the responsibility of the customer to determine if their modified vehicle complies with applicable laws. This limited warranty is the only express warranty applicable to Steeda Autosports products. Other rights may arise or vary from state to state in the United States. Steeda is not responsible for any time for which you may lose the use of your vehicle, any inconvenience you might be caused, the loss of your transportation or any part thereof, or any other incidental or consequential damages you may have.
The Steeda MaxFlow Open Cold Air Intake maximizes the potential of your induction system. Designed by Steeda engineers and put to the test with real track time, this intake will give your S550 an edge. The vehicle-specific design makes use of the factory air duct and draws in fresh and dense air. A roto-molded airbox assembly shields the intake from the hot air of the engine bay and makes sure your 5.0L engine is making peak power. Engineered using CFD (computational fluid dynamics) the intake has been optimized for airflow. Smooth bends and curves in the intake, combined with a high-flow nanofiber mesh air filter, ensure unrestricted airflow. The filter attaches to a specially designed bellmouth velocity stack that helps to draw in a larger volume of air and increase the speed of air getting pulled into your engine. Steeda's 114mm mass airflow housing is built into the intake tube and generates a clean signal for smooth throttle response and outstanding drivability.
The attention to detail that was put into designing this kit is unlike that of any other brand. Steeda went the extra mile to design the kit to work with the Gen 3 Coyote engine covers so that there is no need to modify or cut the cover. This allows you to maintain that clean look that the stock engine bay has. You have the option to delete the sound tube that sends intake noise into the cabin or delete the sound tube for a quieter cabin.
If you are looking for an intake system that is designed for your S550 by real racers, enthusiasts, and owners of Mustangs, this is the kit for you. Designed, engineered, and manufactured in-house, right here in the USA. With over 30 years of experience racing and building performance parts for Mustangs, you can be sure that Steeda is the name you can trust.
Warning: Not approved for sale in California or states that require a California E.O. #. This part has been designed and is intended for off-road applications only. Installation of this part on a vehicle that is driven on public roads may violate U.S. and Canadian laws and regulations.
Note: Federal and several state and provincial laws prohibit the removal, modification or rendering inoperative of any part that affects emissions or safety on motor vehicles used on public streets or highways. Steeda Autosports assumes no liability for any violations arising out of any federal, state or provincial emissions or safety requirements on motor vehicles arising out of the customer's modifications and/or use of Steeda products. It is the responsibility of the customer to determine if their modified vehicle complies with applicable laws.
This limited warranty is the only express warranty applicable to Steeda Autosports products. Other rights may arise or vary from state to state in the United States. Steeda is not responsible for any time for which you may lose the use of your vehicle, any inconvenience you might be caused, the loss of your transportation or any part thereof, or any other incidental or consequential damages you may have.
The Steeda MaxFlow Open Cold Air Intake maximizes the potential of your induction system. Designed by Steeda engineers and put to the test with real track time, this intake will give your S550 an edge. The vehicle-specific design makes use of the factory air duct and draws in fresh and dense air. A roto-molded airbox assembly shields the intake from the hot air of the engine bay and makes sure your 5.0L engine is making peak power. Engineered using CFD (computational fluid dynamics) the intake has been optimized for airflow. Smooth bends and curves in the intake, combined with a high-flow nanofiber mesh air filter, ensure unrestricted airflow. The filter attaches to a specially designed bellmouth velocity stack that helps to draw in a larger volume of air and increase the speed of air getting pulled into your engine. Steeda's 114mm mass airflow housing is built into the intake tube and generates a clean signal for smooth throttle response and outstanding drivability.
The attention to detail that was put into designing this kit is unlike that of any other brand. Steeda went the extra mile to design the kit to work with the Gen 3 Coyote engine covers so that there is no need to modify or cut the cover. This allows you to maintain that clean look that the stock engine bay has. You have the option to delete the sound tube that sends intake noise into the cabin or delete the sound tube for a quieter cabin.
If you are looking for an intake system that is designed for your S550 by real racers, enthusiasts, and owners of Mustangs, this is the kit for you. Designed, engineered, and manufactured in-house, right here in the USA. With over 30 years of experience racing and building performance parts for Mustangs, you can be sure that Steeda is the name you can trust.
Warning: Not approved for sale in California or states that require a California E.O. #. This part has been designed and is intended for off-road applications only. Installation of this part on a vehicle that is driven on public roads may violate U.S. and Canadian laws and regulations.
Note: Federal and several state and provincial laws prohibit the removal, modification or rendering inoperative of any part that affects emissions or safety on motor vehicles used on public streets or highways. Steeda Autosports assumes no liability for any violations arising out of any federal, state or provincial emissions or safety requirements on motor vehicles arising out of the customer's modifications and/or use of Steeda products. It is the responsibility of the customer to determine if their modified vehicle complies with applicable laws.
This limited warranty is the only express warranty applicable to Steeda Autosports products. Other rights may arise or vary from state to state in the United States. Steeda is not responsible for any time for which you may lose the use of your vehicle, any inconvenience you might be caused, the loss of your transportation or any part thereof, or any other incidental or consequential damages you may have.
Keep. That. Air. FLOWING! If you're rocking a Coyote engine, you already know it's vicious. But a new 2020 Mustang GT cold air intake will make that puppy howl at the moon, giving you significant horsepower and torque gains. Even if you have a standard 2020 Mustang, cold air intakes are simple, effective Mustang GT performance upgrades that can blow you away.
A 2020 Mustang GT intake system is the way to go if you want to feel the thrill of a cold rush of air flowing straight to your engine. Let's be honest; your stock system just can't keep up with your demands. It sucks in hot air from the engine bay, putting a major damper on your power and performance capabilities. Thankfully, aftermarket cold air intakes for the 2020 Mustang GT reroute where the air is drawn in from, ensuring it's as cool and dense as possible.T This means your engine can "breathe" better, easily reaching peak performance levels.
Lethal Performance has an awesome selection of cold air intakes to choose from, with products from BBK, Roush, PMAS, Whipple Superchargers and more! Check out all of our 2020 Mustang GT cold air intake options now.
A 2020 Mustang GT intake does more than reduce your air temperature. It also increases airflow for maximum performance. 2020 Ford Mustang GT cold air intake systems ditch the puny, restrictive airbox for larger, smoother diameter intake tubes with fewer bends, providing your engine with the constant airflow it craves.
Colder air and constant airflow are the two most important components to optimizing your induction system. They work together to bring you the benefits that make a difference in your drives.
When you pick up a cold air intake for your 2020 Mustang GT, you'll see and feel the following benefits:
Are you ready to unleash the full potential of your 2020 Mustang GT? Lethal Performance has got you covered with our top-of-the-line 2020 Mustang GT cold air intake systems. Don't settle for your restrictive stock airbox that chokes your engine of much-needed airflow. Our cold air intakes for the 2020 Mustang GT provide a steady flow of cool, oxygen-rich air, giving your pony the extra horsepower, torque and acceleration it deserves. Feel the rush of a better-breathing engine with a 2020 Ford Mustang GT cold air intake today. Also, check out all of our 2020 Mustang GT performance parts for more upgrades.
The Mustang intake manifold on the 2018 GT was immediately popular because of its increase in airflow and high-rev capability. Phenomenal performance gains coupled…
When you drive your brand new Mustang off the floor and onto the open road, you can be confident…
If you own a Mustang, there's no doubt in our minds that you can cite your car's three sexiest stats…