Call us for help 1.877.253.8425 or 1.561.753.8105
You have no items in your shopping cart.
SCT BA-5000 Slot Style MAF Meter
The SCT Big Air Mass Airflow Slot Style Sensor is great for modified and custom tuned applications where the stock mass air meter "pegs" due to increased air flow. This Big Air Slot Style MAF Meter from SCT is a direct bolt-on replacement for 2004+ Ford F150 and the 2005+ GT and GT500 Mustangs and can also be used on earlier model Mustangs and Trucks when used with a dedicated housing or by welding on the appropriate flange to intake piping. SCT’s Big Air MAF Meters feature OEM quality calibration for factory level drivability, repeated accuracy, and reliability. The SCT Big Air Slot Style MAF Meter supports 400rwhp - 725rwhp with Centrifugal Blower applications and 400rwhp - 825rwhp with Roots Blower applications. The SCT BA-5000 Mustang Big Air Slot Style MAF Meter requires custom tuning for the best results.
Features:
SCT BA-3000 90mm MAF Meter with Aluminum Housing
* Supports 400rwhp - 625rwhp with Centrifical Blower Applications
* Supports 400rwhp - 700rwhp with Roots Blower Applications
New Design! Supports More POWER!
Eliminate Pegged MAF Meters Forever!
Every custom tuner has fought with MAF meters that arrive DOA, are calibrated incorrectly or peg at a certain HP level. SCTs redesigned BIG-AIR Meters are the solution. Our 90mm BIG-AIR MAF Meters support up to 825RWHP, will NOT PEG and are direct replacements for all 2000+ Ford Lightning˜s & ˜03-04 Cobras. SCTs Big Air MAF Meters feature OEM Quality Calibration for factory driveability, repeated accuracy, and reliability.
SCT BA-2600 90mm MAF Meter with Aluminum Housing
* Supports 400rwhp - 625rwhp with Centrifical Blower Applications
* Supports 400rwhp - 700rwhp with Roots Blower Applications
New Design! Supports More POWER!
Eliminate Pegged MAF Meters Forever!
Every custom tuner has fought with MAF meters that arrive DOA, are calibrated incorrectly or peg at a certain HP level. SCTs redesigned BIG-AIR Meters are the solution. Our 90mm BIG-AIR MAF Meters support up to 825RWHP, will NOT PEG and are direct replacements for all 2000+ Ford Lightning˜s & ˜03-04 Cobras. SCTs Big Air MAF Meters feature OEM Quality Calibration for factory driveability, repeated accuracy, and reliability.
JMS is revolutionizing Ford mass air fuel injection systems with the Mass Air Modifier for Ford and GM vehicles. This simple and easy to use in-line MAF tuning device is designed to accurately scale and filter the mass air signal on all MAF equipped Ford cars, trucks and SUV's.
Learn More
Regular Price: $44.99
Special Price $42.74
Out of stock
Our steel flange allows the 05+ sensor to be installed directly onto any size tube. The flange must be attached by welding. The radius on the flange is cut for 3.5", but welding will fill in any small gaps present when used on other tube sizes.
If you are not able to weld the flanges on take a look at our billet MAF housings.
In 2005 Ford Introduced a new style of mass-air sensor. It is commonly referred to "slot" or "card" style. This sensor has no housing, the stock airbox has a receptacle for the sensor.
We have found that the new sensor works very well in blow-through applications. Blow-through means that the mass air sensor is placed after the compressor (supercharged or turbocharged vehicles). The slot style MAF provides a very clean and consistent signal when used in blow-through. The slot style MAF can be placed in any size tube, from 3" to 4.5". We do not recommend going smaller than 2.75". In blow-through applications a 3" tube will result in the best signal, 3.5" tube will result in a marginal signal, and 4" will result in a very poor signal when used in blow-through. The car will need to be properly tuned for the new MAF sensor housing size.
When it comes to driveability and throttle response, blow through with an 05+ MAF is the best way to go. Having the MAF sensor far away from the engine makes the car harder to tune and hinders throttle response. In the past tuners used to recommend suck-through, but this has since changed with the introduction of the 05+ MAF. With blow-through the by-pass valve can now be vented to atmosphere, this will reduced air temps, because the air is no longer being re-circulated and re-heated.
Running the MAF sensor in blow through in a smaller tube than stock reduces range, to get this range back you can use a MAFIA extender or an VMP HPX slot style sensor. For very high power applications the VMP HPX sensor is recommended, as the MAFIA can only be used up to setting 3 on the 05+ MAF.
Learn More
SKU:VR-VRT_BMW_ECU_999
