Exhaust
Exhaust
Affirm Payments
Buy with monthly payments Get a real-time decision.
Learn More
FILTER BY

Currently Shopping by:

  1. Remove This Item Manufacturer: BBK
  2. Remove This Item Price: $0.00 - $999.99
Clear All
My Cart

You have no items in your shopping cart.

Grid List

Set Descending Direction
  1. BBK 1-7/8" Long Tube Headers - Chrome (6.1L-6.2L-6.4L Challenger, Charger) - 1648

    BBK 1-7/8" Long Tube Headers - Chrome (6.1L-6.2L-6.4L Challenger, Charger) - 1648

    $799.99

    Description
    Fits ALL Dodge Charger Challenger, Chrysler 300C 6.1L / 6.4L And 6.2L HellCat Applications
    Gain 20+ Horsepower and Improve Sound
    Large 1-7/8" Primaries for Maximum Flow
    Direct Bolt On with Matching Mid pipe Kit (Sold Separately)
    Includes All Required Hardware and Gaskets
    Nickel Chrome Finish
    Better Exhaust Flow = More Power
    Increase the horsepower output of your 2006-2019 Dodge Challenger, Charger SRT8 or HellCat 6.2L along with other 6.1L and 6.4L HEMI powered cars with these BBK Performance full length headers. BBK Performance full length headers will increase your exhaust flow giving you additional horsepower and torque. These full length headers will help give your engine a throaty exhaust note.

    Designed for Maximum Performance
    BBK Performance full length headers are made from 1-7/8" CNC-machined mandrel bent tubing with 3/8" thick die-stamped flanges. The full length primary tube design creates unrestricted airflow for ultimate horsepower gains. These headers are pressure tested to ensure leak free performance on your Hemi powered modern muscle car.

    Easy Installation
    When used with the matching midpipes these headers will connect to factory or aftermarket exhaust midpipes, making them a great fit with stock or aftermarket catback exhaust kits.

    Emissions Information
    This part is NOT C.A.R.B Approved and cannot be installed for use on any emission controlled vehicle in California.It cannot be sold or shipped to any California resident or addressee.

    Fits
    2006-2019 Dodge Charger SRT8 6.1L or 6.4L V8
    2015-2019 HellCat 6.2L V8 Applications
    2008-2019 Dodge Challenger SRT8 6.1L or 6.4L V8
    2005-2019 Chrysler 300C SRT8 6.1L or 6.4L V8
    2005-2019 Dodge Magnum SRT8 6.1L or 6.4L V8
    Please Note: Requires the use of Short Mid Pipes Part#16481 - With High Flow Catalytic Converters or Part#16482 - Off Road - Race Only version

    Requires O2 Harness Extensions See Below
    Part#1114 Hell Cat 6.2L Front O2 Harness Extension 6pin 12"
    Part#11181 Hell Cat 6.2L Rear O2 Harness Extension 4pin 24"
    Part#1118 Dodge 6.1L 6.4L Front O2 Harness Extension 4pin 12"
    Part#11181 Dodge 6.1L 6.4L Rear O2 Harness Extension 4pin
    Learn More
  2. BBK 3" Short Mid Pipe W/ High Flow Cats (6.1L-6.2L-6.4L Challenger, Charger) - 16481

    BBK 3" Short Mid Pipe W/ High Flow Cats (6.1L-6.2L-6.4L Challenger, Charger) - 16481

    $649.99

    Description
    Fits All Dodge Challenger, Charger 6.1L and 6.4L and Hellcat 6.2L applications when Installing BBK Long Tube Headers Part# 1648 and 16480
    3.0" High Flow Catalytic Converters for Enhanced Exhaust Flow
    Mandrel Bent Aluminized Steel Tubing
    Pipes Reduce down to factory size to make installation to factory exhaust system a snap
    O2 Sensor Locations Installed
    Offers a good aggressive sound and improved horsepower and torque - a perfect combination with the BBK Performance Long tubes for added horsepower and performance
    Required To Complete Your Long Tube Header Install
    Connect the BBK Headers on your 2015-2019 Dodge Challenger Charger to the rest of the exhaust system with this BBK Performance 3.0" high flow catted mid-pipe kit. Combined with the added flow from your headers, this BBK Performance mid pipe will dramatically increase the sound of your HEMI Powered car to a roar that will be sure to turn heads.

    Easy Installation
    The mid pipes come with oxygen sensor bungs to make installation a breeze - however O2 extension harnesses are required. While not always necessary, a handheld tuner is recommended. Because of the sensitive electronics on newer models, even midpidpes using high flow cats can sometimes cause a catalyst under-temp code a tune will be required.

    Maximum Exhaust Flow
    High flow catalytic converters are used for better exhaust flow. This mid-pipe is designed with mandrel bent aluminized steel for great exhaust flow. This part is not legal for use in California or any state that has adopted California emissions standards. Please check your state and local emissions laws to ensure compliance.

    Emissions Information
    This part is NOT C.A.R.B Approved and cannot be installed for use on any emission controlled vehicle in California.
    It cannot be sold or shipped to any California resident or addressee.
    Fits
    2015-2019 Dodge Challenger, Charger 6.1L / 6.4L and Hellcat 6.2L
    Learn More
  3. BBK 1-7/8" Long Tube Headers - Polished Silver Ceramic (6.1L-6.2L-6.4L Challenger, Charger) - 16480

    BBK 1-7/8" Long Tube Headers - Polished Silver Ceramic (6.1L-6.2L-6.4L Challenger, Charger) - 16480

    $849.99

    Description
    Fits ALL Dodge Charger Challenger, Chrysler 300C 6.1L / 6.4L And 6.2L HellCat Applications
    Gain 20+ Horsepower and Improve Sound
    Large 1-7/8" Primaries for Maximum Flow
    Direct Bolt On with Matching Mid pipe Kit (Sold Separately)
    Includes All Required Hardware and Gaskets
    Polished Silver Ceramic
    Better Exhaust Flow = More Power
    Increase the horsepower output of your 2006-2019 Dodge Challenger, Charger SRT8 or HellCat 6.2L along with other 6.1L and 6.4L HEMI powered cars with these BBK Performance full length headers. BBK Performance full length headers will increase your exhaust flow giving you additional horsepower and torque. These full length headers will help give your engine a throaty exhaust note.

    Designed for Maximum Performance
    BBK Performance full length headers are made from 1-7/8" CNC-machined mandrel bent tubing with 3/8" thick die-stamped flanges. The full length primary tube design creates unrestricted airflow for ultimate horsepower gains. These headers are pressure tested to ensure leak free performance on your Hemi powered modern muscle car.

    Easy Installation
    When used with the matching midpipes these headers will connect to factory or aftermarket exhaust midpipes, making them a great fit with stock or aftermarket catback exhaust kits.

    Emissions Information
    This part is NOT C.A.R.B Approved and cannot be installed for use on any emission controlled vehicle in California.It cannot be sold or shipped to any California resident or addressee.

    Fits
    2006-2019 Dodge Charger SRT8 6.1L or 6.4L V8
    2015-2019 HellCat 6.2L V8 Applications
    2008-2019 Dodge Challenger SRT8 6.1L or 6.4L V8
    2005-2019 Chrysler 300C SRT8 6.1L or 6.4L V8
    2005-2019 Dodge Magnum SRT8 6.1L or 6.4L V8
    Please Note: Requires the use of Short Mid Pipes Part#16481 - With High Flow Catalytic Converters or Part#16482 - Off Road - Race Only version

    Requires O2 Harness Extensions See Below
    Part#1114 Hell Cat 6.2L Front O2 Harness Extension 6pin 12"
    Part#11181 Hell Cat 6.2L Rear O2 Harness Extension 4pin 24"
    Part#1118 Dodge 6.1L 6.4L Front O2 Harness Extension 4pin 12"
    Part#11181 Dodge 6.1L 6.4L Rear O2 Harness Extension 4pin
    Learn More

Grid List

Set Descending Direction
Recently viewed products

video title

video content