DETAILS:
Dyno-Proven Gains up to +18 HP & +22 Lbs. x Ft. TQ
Outflows Factory Intake by 42%
One-Piece XLPE Housing Seals to Fender
Clear Sight Window for Convenient Filter Inspection Without Disassembly
Washable and Reusable Pro DRY S Air Filter for Maximum Convenience
Premium T-Bolt Clamps and a Reinforced Coupler Provide a Secure Seal

aFe is proud to introduce the all new Momentum sealed intake system for the 2014-2019 Chevrolet Corvette (C7) with the V8-6.2L engine. This all new Momentum intake system resulted in 18 horsepower and 22 lbs. x ft. torque and outflows the factory intake by 42%. This system is superior in every way, from the one-piece sealed housing, to the massive air filter, roto-molded tube w/ built-in resonance chamber and premium hardware. This system uses a CAD designed, dyno-tuned, roto-molded intake tube & housing to achieve maximum power gains while maintaining a perfect fit. This is a direct bolt-on kit and requires no cutting or drilling on OEM parts.

Unique One-Piece Housing w/ Sight Window:
The one-piece sealed housing is used to eliminate the use of multiple components and ensure the coolest air intake charge available. A large clear sight window allows for filter inspection without removal of the air box. The roto-molded housing is made out of black cross-linked polyethylene and mounts directly into the factory location on the fender well to capture the coolest air available from the factory intake tract.

Roto-Molded Tube:
This system uses a CAD designed, dyno-tuned, roto-molded intake tube to achieve maximum power gains while maintaining a perfect fit. This tube has a built-in resonance chamber to catch un-wanted air intake noises. Two billet aluminum fittings are mounted on the tube to provide a perfect connection with the factory vacuum lines.

Massive Cone Air Filter:
This Momentum intake system was designed around the largest filter possible to allow maximum performance and filtration. This cone filter has a massive 7" oval flange and is 9-1/2" tall Pro DRY S filter media. The Pro DRY S performance air filter features 3-layers of progressively finer mesh synthetic "oil-free" media and is constructed with 100% polyurethane frame for long life and multiple cleaning cycles.

Premium Hardware:
Premium stainless steel T-bolt clamps and a reinforced silicone hump coupling are used for strength and durability while also providing the most secure installation available. Momentum intakes are designed with fewer parts for a quick and simple installation.

Power, Protection and Simplicity.

*Note: This intake system is not CARB exempt at this time and is not legal for sale in California or use on vehicles registered with the California Department of Motor Vehicles.

Learn More

Corsa Performance C7 Z06 Corvette Carbon Fiber Air Intake with DryTech 3D No Oil Filtration (2015 - 2019 Corvette C7 Z06) - 44002D

The CORSA Performance C7 Z06 Corvette air intake is made from pure 100% carbon fiber construction and pairs aesthetics and design for maximum strength and performance. Compared to stock; the optimized shape of the CORSA Performance C7 Z06 air intake, combined with high-performance filtration, increases overall performance and fuel economy. Dyno tuned for maximum results, the CORSA Performance intake produces up to an additional 44HP and 70 FT LBS TQ from the LT-4 engine without a tune. The direct bolt-on system installs in minutes. The intake comes available with your choice of high-performance filtration options; oiled MaxFlow 5 or non-oiled DryTech 3D filtration. The Corsa Performance C7 Z06 carbon fiber Intake is backed by a Limited Lifetime Warranty to the original purchaser.*Filters are backed by a 1 year warranty.

100% Carbon Fiber Construction

No Tune Required


HP Increase - 44.2
TQ Increase - 70.3
Filter Type - Dry
Replacement Filter - 5165D
Flow % Increase - 0.2096346193
Weight Reduction - -1.6
Warranty - Intake: Lifetime, Filter: One Year
fp4 - Easy Bolt On Installation - Installs in Under 1 hour
fp5 - Machined Black Anodized Aluminum MAF Mounting Bracket
fp6 - Features CORSA's High Flow DryTech (No Oil) Filtration
fp7 - *Fits LT1 C7s Equipped with Magnuson Supercharger
fp8 - All hardware Included for install
fp9 - Limited Lifetime Warranty Air Intake, 1 Year Filter

Lethal Performance is proud to offer the entire line of products!
Learn More

Corsa Performance C7 Z06 Carbon Fiber Air Intake with MaxFlow 5 Oiled Filter (2015 - 2019 Corvette C7 Z06) - 44002

The CORSA Performance C7 Z06 Corvette air intake is made from pure 100% carbon fiber construction and pairs aesthetics and design for maximum strength and performance. Compared to stock; the optimized shape of the CORSA Performance C7 Z06 air intake, combined with high-performance filtration, increases overall performance and fuel economy. Dyno tuned for maximum results, the CORSA Performance intake produces up to an additional 44HP and 70 FT LBS TQ from the LT-4 engine without a tune. The direct bolt-on system installs in minutes. The intake comes available with your choice of high-performance filtration options; oiled MaxFlow 5 or non-oiled DryTech 3D filtration. The Corsa Performance C7 Z06 carbon fiber Intake is backed by a Limited Lifetime Warranty to the original purchaser.*Filters are backed by a 1 year warranty.

100% Carbon Fiber Construction

No Tune Required


HP Increase - 44.2
TQ Increase - 70.3
Filter Type - Oiled
Replacement Filter - 5165
Flow % Increase - 0.2096346193
Weight Reduction - -1.6
Warranty - Intake: Lifetime, Filter: One Year
fp4 - Easy Bolt On Installation - Installs in Under 1 hour
fp5 - Machined Black Anodized Aluminum MAF Mounting Bracket
fp6 - Features CORSA's High Flow 5 Layer Oiled Cotton Gauze MaxFlow 5 Filter
fp7 - *Fits LT1 C7s Equipped with Magnuson Supercharger
fp8 - All hardware Included for install
fp9 - Limited Lifetime Warranty Air Intake, 1 Year Filter

Lethal Performance is proud to offer the entire line of products!
Learn More

Description
Simple Bolt On 10-15 Horsepower Gain
Increased Horsepower and Quicker Throttle Response
Large 92mm Throttle Bore
Durable CNC Machined Aluminum Housing
Works With OEM and Aftermarket Intakes
Direct Bolt On for Easy Installation
Includes ALL New OEM Electronics as shown
Improved Throttle Response and Power
Increase the horsepower and torque output, while boosting throttle response on your LT1 V8 equipped 2016-2019 Camaro SS or 2014-2019 Corvette or Truck with this BBK 92mm throttle body. This BBK 92mm throttle body will deliver more horsepower and torque while providing much quicker throttle response. BBK throttle bodies work with both OEM air intakes and aftermarket cold air intakes to ensure perfect fit and excellent performance.

Top Quality Components
BBK 92mm LT1 throttle bodies are CNC machined from high quality 356 aluminum castings to ensure perfect quality and fitment. Features new electronic throttle motor and injection molded plastic gear assemblies for this modern drive by wire application.

Easy Installation
This throttle body comes complete with all required hardware and instructions for an easy install on your LT1 powered Gen 6 Camaro or Corvette C7 right out of the box. All you have to do is remove your inlet tubing and factory throttle body and bolt the BBK throttle body in its place. This throttle body fits the LT1 V8 engine found in Gen 6 Camaro and C7 Corvette. They also fit the L98 found in 2014-2018 GM truck.

Tuning
BBK engineers have designed our electronic throttle control performance throttle bodies to work in most cases with a factory tune, however depending on other modifications and ECM sensitivity on your specific application a tune is sometimes recommended. This is true with most other brand aftermarket performance throttle bodies as well. While it's not normally required, a tune will not only allow the vehicle to work with certain aftermarket upgrades but will also improve overall performance of your entire array of upgrades to work together as a whole.

Fits
2016-2019 Camaro SS LT1 6.2L V8
2014-2019 Corvette 6.2L
2014-2019 GM Truck L86 6.2L V8

Emissions Information
This part is NOT C.A.R.B Approved and cannot be installed for use on any emission controlled vehicle in California.
It cannot be sold or shipped to any California resident or addressee.
Learn More

The Roto-fab 2015-19 Corvette ZO6 Big Gulp Series Cold Air Intake System brings Roto-fab’s LT4 experience and expertise to the Corvette market! This is a “tune required” system with oversize duct work to meet the increased air flow demands of high HP builds.

Check out some of features:

• Huge filter with 6” mounting flange
• Custom molded 6” to 5” MAF sensor housing and 5” molded inlet elbow
• Proprietary MAF housing design optimizes consistency for tuning & street driving
• Air box design maximizes air flow around the filter while isolating from engine bay heat
• Throttle body coupler fits 102-3 MM throttle body (stock TB adapter available separately)
• Machined breather adapter for OEM connection (oversize breather elbow also supplied)
• High gloss silicone couplers & SS clamps
• 100% Bolt-in system and fits under the OEM air extractor
• Will fit other SC systems with the same throttle body location 

Dyno results from a third party showed a 40+ HP gain on a built and tuned car by switching to the Roto-fab Big Gulp air intake and tuning to it with no other changes! The Roto-fab Big Gulp series has long been known for great performance while being tuner and driver friendly. Experience the difference and see why Roto-fab is the fastest name in air intakes!  

Learn More

Carbon Fiber Open Element Air Intake with Dry Filter DryTech 3D Filter Replacement #5165D (Dry) MaxFlow5 Oiled Filter Replacement #5165 (Oiled) CORSA's C7 Carbon Fiber Air Intake blends aesthetics and engineering to deliver in a single package. It outflows the stock intake by 14% and delivers up to 15HP and 15 FT LBS Torque without a tune. +15 Horsepower +15 Torque +14% Flow Increase 50K Miles Filter Life - No Maintenance Depending on driving conditions. Limited Lifetime Warranty with proof of purchase. *Actual performance results are not guaranteed and may vary. All hardware and detailed instructions are included in each kit. Proudly Designed, Engineered & Manufactured in Berea, OH Every air intake is engineered and designed to match the unique properties of the vehicle it is designed for, delivering perfect fitment and maximizing performance. CORSA does not recommend or recognize purchases and installations on unspecified vehicle applications. 100% Carbon Fiber Construction Machined Mass Air Flow Mounting Bracket Outflows Stock Intake creating more HP & TQ Free-Flowing High-Performance Filtration Installs in 1 hour or lessLearn More

AFE Open Element Intake (2014-2019 Chevrolet Corvette V8-6.2L) - 54-13041R

Magnum FORCE Stage-2 Cold Air Intake System w/ Pro 5R Media

Lethal Performance is proud to offer the entire line of AFE products!

advanced FLOW engineering (aFe Power) is a premier designer and manufacturer of automotive performance upgrade systems and components. Current product lines include cold air intake systems, high performance direct fit and racing air filters, exhaust systems, intercoolers, turbochargers, electronic programmers, diesel fuel systems, throttle body spacers, and more. aFe is passionate about providing the most compelling, innovative, and highest performing products that are designed, built and tested in the USA. aFe was founded in 1999 and has headquarters and manufacturing facilities in Corona, California, USA.

This item is not CARB exempt and is not legal to purchase in California Learn More

AFE Open Element Intake (2014-2019 Chevrolet Corvette V8-6.2L) - 54-13041D

Magnum FORCE Stage-2 Cold Air Intake System w/ Pro DRY S Media

Lethal Performance is proud to offer the entire line of AFE products!

advanced FLOW engineering (aFe Power) is a premier designer and manufacturer of automotive performance upgrade systems and components. Current product lines include cold air intake systems, high performance direct fit and racing air filters, exhaust systems, intercoolers, turbochargers, electronic programmers, diesel fuel systems, throttle body spacers, and more. aFe is passionate about providing the most compelling, innovative, and highest performing products that are designed, built and tested in the USA. aFe was founded in 1999 and has headquarters and manufacturing facilities in Corona, California, USA.

This item is not CARB exempt and is not legal to purchase in California Learn More