Borla Axle-Back Exhaust System - S-Type (2016-2019 Camaro) - 11933

S-Type Axle-Back Exhaust System for 2016-2020 Chevrolet Camaro 2.0L 4 Cyl. Turbo Automatic/ Manual Transmission Rear Wheel Drive 2 Door.

Borla is proud to offer a true "Made in the USA" product sold around the world.
Upgrading your factory exhaust system to a Borla T-304 stainless steel performance Axle-Back system with a more efficient and less restrictive design can improve sound (adding more enjoyment driving your vehicle) and increase engine horsepower and torque throughout the RPM range (allowing quicker acceleration to pass a vehicle or get to highway speeds quicker).
Everywhere you look, Borla's spirit of innovation and excitement screams with the same high-volume clarity as our unrivaled exhaust systems.
The mufflers in our Axle-Back systems are tuned for each specific application. Due to this they will dramatically reduce, or eliminate drone on the cabin of the vehicle while delivering that great Borla'sound.
Borla'systems are designed for bolt on installation.
We are a company of motorheads, and it shows in our products, customer service, industry-leading Million Mile Warranty, and culture. On weekends, the same Borla employees who built your exhaust or helped you with technical support can be found competing at tracks, drag strips, off-road events and car shows.
Constructed using T-304 stainless steel for long life and sharp appearance, and features all welded construction for maximum durability.
Unlike any other exhaust brand, Borla'systems are designed from scratch on a vehicle-by-vehicle basis. Every car or truck has unique mechanical and acoustical properties, all taken into account as we spend countless hours optimizing muffler body shapes, internal core configurations, flow dynamics, sound and more.
For many applications, Borla gives you a variety of choices for the volume and character of your exhaust note? From a subdued rumble to an all-out roar.
Million-Mile warranty.
Everything we've learned from racing and street performance over nearly four decades is reflected in each product that leaves our facilities.
Made in the USA.
Along with the distinctive Borla "Sound of



PRODUCT NOTES:
Construction - All Welded
Exhaust Type - Axle-Back System
Exit Position - Single Rear
Exit Style - Single Split Rear Exit
Inlet Inside Diameter - 2.250 in.
Material - T-304 Stainless Steel
Muffler Type - Straight-Through
Off Road Use Only - No
Outlet Outside Diameter - 2.750 in.
Prop 65 - Long Label - WARNING: This product in the physical form it is sold does not present a hazard. However; operations including; but not limited to welding; brazing; or thermal cutting can expose you to chemicals including Chromium; Nickel; Cobalt; Arsenic; Cadmium and Le


Lethal Performance is proud to offer the entire line of Borla products!
Learn More

Chevrolet pulled all the stops to ensure the re-launch of the legendary Camaro was worth the wait to agonized fans, and the world’s most winning exhaust has responded in kind. Rather than simply work from concept vehicles and drawings, BORLA® RD engieers headed down under to the GM Holden facility in Australia to work directly with the GM Camaro team. The result of this exciting collaboration is a series of exhaust systems including Cat-Backs,™ rear sections and long-tube headers, providing the ultimate in tuned performance, sound, style and fitment. BORLA’s Camaro Cat-Back™ arsenal is led by an aggressive high-performance “S” type system (PN140280) that utilizes patented XR-1® technology from BORLA® exhausts used in race-winning Corvettes and other GM champions. Drivers who prefer a more subdued sound will opt for (PN140281), a “Touring” version that combines a racing heart with a more stealth-like growl. V6 owners get a big piece of Cat-Back™ action too, with a power-adding dual system (PN140282) that amplifies the 3.6L powerplant well into V8 territory. Each of these Cat-Back™ options (including the V6 system) comes complete with an x-pipe for increased flow and richer sound, and is also available as a rear section. (PN11775), (PN11774) and the V6 version (PN11776). On top of the power, sound and looks, drivers also enjoy significant weight savings with a BORLA® exhaust, shedding as much as 43lbs over stock — enough to make a difference at the pump and the track. Like all BORLA® exhaust products, the Camaro systems feature durable high-quality austenitic stainless steel construction, patented “power when you want it, fuel economy when you need it” technology, mirror-polished tips and a Million-Mile Warranty. For serious racers, BORLA® has topped their lineup with long tube stainless steel XR-1® Headers (PN17249). Combining 1¾” primary tubes with patented race merge collectors, this product is a direct result of BORLA’s 30-year legacy with race-winning Chevrolets from Indy to DaytonaLearn More

BORLA® has developed a revolutionary new exhaust technology that enables our engineers to deliver unprecedented vehicle-specific control over the acoustical note of an exhaust throughout the RPM range, while retaining 100% of the power-adding capabiities of BORLA’s patented multicore design. Called ATAK™ (Acoustically-Tuned Applied Kinetics), this new technology produces the highest available dB (decibel) levels in the BORLA street-legal lineup, and is designed for high-performance purists who prefer exhaust notes over their stereos. The focus of ATAK™ is to pump the volume while retaining clarity of sound, avoiding distortion typically found in louder exhausts. With ATAK™, the sound output is tuned like a graphic equalizer to shape and focus sound waves for optimum high-volume output. The development of each ATAK™ system begins with extensive study of each vehicle’s acoustical properties. The technology is based on custom-tuned attributes of the internal muffler cores, which are calibrated on a vehicle-by-vehicle basis to deliver the most desirable sound. A complete technology overview with extensive video footage of launch, drive-by, and in-cabin sounds with a 2010 Camaro SS can be viewed at www.youtube.com/borla. “The distance from the exhaust manifold to the rear bumper, the shape of the underbody shielding, the amount of ground clearance, all these factors affect the sound, and they’re different on each vehicle. With ATAK™ we take all this into account, and the result will blow you away,” says company Sales Marketing Manager, David Borla. Several BORLA ATAK™ systems are currently available. For the 2010 6.2L V8 Camaro there is a Cat-Back™ systems (PN 140356 and 140378) and Rear Section (PN 11788) for models without the “Ground Effects” option, and a rear section (PN 11794) designed to complement the Ground Effects kit. NOTE: YouTube/Borla ATAK Video sound comparisons were done with Cat-back© systems only. Your results may vary depending on additional equipment. REAR SECTIONS MAINTAIN STOCK FRONT MUFFLER SO THE FULL EFFECT OF THE ATAK SOUND IS NOT REALIZED, BUT STILL LOUDER THAN THE S-TYPE. Like all BORLA exhaust products, each system is handmade in the USA by master craftspeople and features premium 300-Series high-quality austenitic stainless steel construction, ultra-smooth mandrel bent piping, mirror-polished tips, and a Million-Mile WarrantyLearn More

Borla Axle-Back Exhaust System - S-Type (2010-2013 Camaro) - 11776

S-Type Axle-Back Exhaust System for 2010 Ford Mustang GT 4.6L V8 Automatic/ Manual Transmission Rear Wheel Drive; 2 Door Coupe; Convertible.

Borla is proud to offer a true "Made in the USA" product sold around the world.
Upgrading your factory exhaust system to a Borla T-304 stainless steel performance Axle-Back system with a more efficient and less restrictive design can improve sound (adding more enjoyment driving your vehicle) and increase engine horsepower and torque throughout the RPM range (allowing quicker acceleration to pass a vehicle or get to highway speeds quicker).
Everywhere you look, Borla's spirit of innovation and excitement screams with the same high-volume clarity as our unrivaled exhaust systems.
The mufflers in our Axle-Back systems are tuned for each specific application. Due to this they will dramatically reduce, or eliminate drone on the cabin of the vehicle while delivering that great Borla'sound.
Borla'systems are designed for bolt on installation.
We are a company of motorheads, and it shows in our products, customer service, industry-leading Million Mile Warranty, and culture. On weekends, the same Borla employees who built your exhaust or helped you with technical support can be found competing at tracks, drag strips, off-road events and car shows.
Constructed using T-304 stainless steel for long life and sharp appearance, and features all welded construction for maximum durability.
Unlike any other exhaust brand, Borla'systems are designed from scratch on a vehicle-by-vehicle basis. Every car or truck has unique mechanical and acoustical properties, all taken into account as we spend countless hours optimizing muffler body shapes, internal core configurations, flow dynamics, sound and more.
For many applications, Borla gives you a variety of choices for the volume and character of your exhaust note? From a subdued rumble to an all-out roar.
Million-Mile warranty.
Everything we've learned from racing and street performance over nearly four decades is reflected in each product that leaves our facilities.
Made in the USA.
Along with the distinctive Borla "Sound of



PRODUCT NOTES:
Construction - All Welded
Exhaust Type - Axle-Back System
Exit Position - Rear
Exit Style - Single Split Rear Exit
Inlet Inside Diameter - 2.250 in.
Material - T-304 Stainless Steel
Muffler Type - Straight-Through
Off Road Use Only - No
Outlet Outside Diameter - 2.250 in.
Prop 65 - Long Label - WARNING: This product in the physical form it is sold does not present a hazard. However; operations including; but not limited to welding; brazing; or thermal cutting can expose you to chemicals including Chromium; Nickel; Cobalt; Arsenic; Cadmium and Le


Lethal Performance is proud to offer the entire line of Borla products!
Learn More

Borla Axle-Back Exhaust System - Atak (2010-2013 Camaro) - 11794

S-Type Axle-Back Exhaust System for 2009-2013 Toyota Corolla S/ XRS 1.8L/ 2.4L 4 Cyl. Automatic/ Manual Transmission Front Wheel Drive 4 Door.

Borla is proud to offer a true "Made in the USA" product sold around the world.
Upgrading your factory exhaust system to a Borla T-304 stainless steel performance Axle-Back system with a more efficient and less restrictive design can improve sound (adding more enjoyment driving your vehicle) and increase engine horsepower and torque throughout the RPM range (allowing quicker acceleration to pass a vehicle or get to highway speeds quicker).
Everywhere you look, Borla's spirit of innovation and excitement screams with the same high-volume clarity as our unrivaled exhaust systems.
The mufflers in our Axle-Back systems are tuned for each specific application. Due to this they will dramatically reduce, or eliminate drone on the cabin of the vehicle while delivering that great Borla'sound.
Borla'systems are designed for bolt on installation.
We are a company of motorheads, and it shows in our products, customer service, industry-leading Million Mile Warranty, and culture. On weekends, the same Borla employees who built your exhaust or helped you with technical support can be found competing at tracks, drag strips, off-road events and car shows.
Constructed using T-304 stainless steel for long life and sharp appearance, and features all welded construction for maximum durability.
Unlike any other exhaust brand, Borla'systems are designed from scratch on a vehicle-by-vehicle basis. Every car or truck has unique mechanical and acoustical properties, all taken into account as we spend countless hours optimizing muffler body shapes, internal core configurations, flow dynamics, sound and more.
For many applications, Borla gives you a variety of choices for the volume and character of your exhaust note? From a subdued rumble to an all-out roar.
Million-Mile warranty.
Everything we've learned from racing and street performance over nearly four decades is reflected in each product that leaves our facilities.
Made in the USA.
Along with the distinctive Borla "Sound of



PRODUCT NOTES:
Construction - All Welded
Exhaust Type - Axle-Back System
Exit Position - Split Rear
Exit Style - Single Split Rear Exit
Inlet Inside Diameter - 2.500 in.
Material - T-304 Stainless Steel
Muffler Type - Straight-Through
Off Road Use Only - No
Outlet Outside Diameter - 2.500 in.
Prop 65 - Long Label - WARNING: This product in the physical form it is sold does not present a hazard. However; operations including; but not limited to welding; brazing; or thermal cutting can expose you to chemicals including Chromium; Nickel; Cobalt; Arsenic; Cadmium and Le


Lethal Performance is proud to offer the entire line of Borla products!
Learn More

Borla Axle-Back Exhaust System - S-Type (2010-2013 Camaro) - 11801

S-Type Axle-Back Exhaust System for 2010-2013 Chevrolet Camaro SS 6.2L V8 Automatic/ Manual Rear Wheel Drive 2-Door Coupe; Convertible w/Ground Effects Package (GFX).

Borla is proud to offer a true "Made in the USA" product sold around the world.
Upgrading your factory exhaust system to a Borla T-304 stainless steel performance Axle-Back system with a more efficient and less restrictive design can improve sound (adding more enjoyment driving your vehicle) and increase engine horsepower and torque throughout the RPM range (allowing quicker acceleration to pass a vehicle or get to highway speeds quicker).
Everywhere you look, Borla's spirit of innovation and excitement screams with the same high-volume clarity as our unrivaled exhaust systems.
The mufflers in our Axle-Back systems are tuned for each specific application. Due to this they will dramatically reduce, or eliminate drone on the cabin of the vehicle while delivering that great Borla'sound.
Borla'systems are designed for bolt on installation.
We are a company of motorheads, and it shows in our products, customer service, industry-leading Million Mile Warranty, and culture. On weekends, the same Borla employees who built your exhaust or helped you with technical support can be found competing at tracks, drag strips, off-road events and car shows.
Constructed using T-304 stainless steel for long life and sharp appearance, and features all welded construction for maximum durability.
Unlike any other exhaust brand, Borla'systems are designed from scratch on a vehicle-by-vehicle basis. Every car or truck has unique mechanical and acoustical properties, all taken into account as we spend countless hours optimizing muffler body shapes, internal core configurations, flow dynamics, sound and more.
For many applications, Borla gives you a variety of choices for the volume and character of your exhaust note? From a subdued rumble to an all-out roar.
Million-Mile warranty.
Everything we've learned from racing and street performance over nearly four decades is reflected in each product that leaves our facilities.
Made in the USA.
Along with the distinctive Borla "Sound of



PRODUCT NOTES:
Construction - All Welded
Exhaust Type - Axle-Back System
Exit Position - Single Rear
Exit Style - Single Split Rear Exit
Inlet Inside Diameter - 2.500 in.
Material - T-304 Stainless Steel
Muffler Type - Straight-Through
Off Road Use Only - No
Outlet Outside Diameter - 2.500 in.
Prop 65 - Long Label - WARNING: This product in the physical form it is sold does not present a hazard. However; operations including; but not limited to welding; brazing; or thermal cutting can expose you to chemicals including Chromium; Nickel; Cobalt; Arsenic; Cadmium and Le


Lethal Performance is proud to offer the entire line of Borla products!
Learn More

Borla Axle-Back Exhaust System - S-Type (2014-2015 Camaro) - 11849

S-Type Axle-Back Exhaust System for 2014-2015 Chevrolet Camaro SS 6.2L V8 Automatic/ Manual Transmission Rear Wheel Drive 2 Door.

Borla is proud to offer a true "Made in the USA" product sold around the world.
Upgrading your factory exhaust system to a Borla T-304 stainless steel performance Axle-Back system with a more efficient and less restrictive design can improve sound (adding more enjoyment driving your vehicle) and increase engine horsepower and torque throughout the RPM range (allowing quicker acceleration to pass a vehicle or get to highway speeds quicker).
Everywhere you look, Borla's spirit of innovation and excitement screams with the same high-volume clarity as our unrivaled exhaust systems.
The mufflers in our Axle-Back systems are tuned for each specific application. Due to this they will dramatically reduce, or eliminate drone on the cabin of the vehicle while delivering that great Borla'sound.
Borla'systems are designed for bolt on installation.
We are a company of motorheads, and it shows in our products, customer service, industry-leading Million Mile Warranty, and culture. On weekends, the same Borla employees who built your exhaust or helped you with technical support can be found competing at tracks, drag strips, off-road events and car shows.
Constructed using T-304 stainless steel for long life and sharp appearance, and features all welded construction for maximum durability.
Unlike any other exhaust brand, Borla'systems are designed from scratch on a vehicle-by-vehicle basis. Every car or truck has unique mechanical and acoustical properties, all taken into account as we spend countless hours optimizing muffler body shapes, internal core configurations, flow dynamics, sound and more.
For many applications, Borla gives you a variety of choices for the volume and character of your exhaust note? From a subdued rumble to an all-out roar.
Million-Mile warranty.
Everything we've learned from racing and street performance over nearly four decades is reflected in each product that leaves our facilities.
Made in the USA.
Along with the distinctive Borla "Sound of



PRODUCT NOTES:
Construction - All Welded
Exhaust Type - Axle-Back System
Exit Position - Split Rear
Exit Style - Single Split Rear Exit
Inlet Inside Diameter - 2.500 in.
Material - T-304 Stainless Steel
Muffler Type - Straight-Through
Off Road Use Only - No
Outlet Outside Diameter - 2.500 in.
Prop 65 - Long Label - WARNING: This product in the physical form it is sold does not present a hazard. However; operations including; but not limited to welding; brazing; or thermal cutting can expose you to chemicals including Chromium; Nickel; Cobalt; Arsenic; Cadmium and Le


Lethal Performance is proud to offer the entire line of Borla products!
Learn More

Borla Axle-Back Exhaust System - Atak (2014-2015 Camaro) - 11851

ATAK Axle-Back Exhaust System for 2014-2015 Chevrolet Camaro SS 6.2L V8 Automatic/ Manual Transmission Rear Wheel Drive 2 Door.

Borla is proud to offer a true "Made in the USA" product sold around the world.
Upgrading your factory exhaust system to a Borla T-304 stainless steel performance Axle-Back system with a more efficient and less restrictive design can improve sound (adding more enjoyment driving your vehicle) and increase engine horsepower and torque throughout the RPM range (allowing quicker acceleration to pass a vehicle or get to highway speeds quicker).
Everywhere you look, Borla's spirit of innovation and excitement screams with the same high-volume clarity as our unrivaled exhaust systems.
The mufflers in our Axle-Back systems are tuned for each specific application. Due to this they will dramatically reduce, or eliminate drone on the cabin of the vehicle while delivering that great Borla'sound.
Borla'systems are designed for bolt on installation.
We are a company of motorheads, and it shows in our products, customer service, industry-leading Million Mile Warranty, and culture. On weekends, the same Borla employees who built your exhaust or helped you with technical support can be found competing at tracks, drag strips, off-road events and car shows.
Constructed using T-304 stainless steel for long life and sharp appearance, and features all welded construction for maximum durability.
Unlike any other exhaust brand, Borla'systems are designed from scratch on a vehicle-by-vehicle basis. Every car or truck has unique mechanical and acoustical properties, all taken into account as we spend countless hours optimizing muffler body shapes, internal core configurations, flow dynamics, sound and more.
For many applications, Borla gives you a variety of choices for the volume and character of your exhaust note? From a subdued rumble to an all-out roar.
Million-Mile warranty.
Everything we've learned from racing and street performance over nearly four decades is reflected in each product that leaves our facilities.
Made in the USA.
Along with the distinctive Borla "Sound of



PRODUCT NOTES:
Construction - All Welded
Exhaust Type - Axle-Back System
Exit Position - Split Rear
Exit Style - Single Split Rear Exit
Inlet Inside Diameter - 2.500 in.
Material - T-304 Stainless Steel
Muffler Type - Straight-Through
Off Road Use Only - No
Outlet Outside Diameter - 4.500 in.
Prop 65 - Long Label - WARNING: This product in the physical form it is sold does not present a hazard. However; operations including; but not limited to welding; brazing; or thermal cutting can expose you to chemicals including Chromium; Nickel; Cobalt; Arsenic; Cadmium and Le


Lethal Performance is proud to offer the entire line of Borla products!
Learn More