Borla Axle-Back Exhaust System - Atak (2016-2020 Camaro) - 11925CFBA

ATAK Axle-Back Exhaust System for 2016-2020 Chevrolet Camaro SS 6.2L V8 Automatic/ Manual Transmission Rear Wheel Drive 2 Door Equipped With Dual Mode Exhaust (NPP).

Borla is proud to offer a true "Made in the USA" product sold around the world.
Upgrading your factory exhaust system to a Borla T-304 stainless steel performance Axle-Back system with a more efficient and less restrictive design can improve sound (adding more enjoyment driving your vehicle) and increase engine horsepower and torque throughout the RPM range (allowing quicker acceleration to pass a vehicle or get to highway speeds quicker).
Everywhere you look, Borla's spirit of innovation and excitement screams with the same high-volume clarity as our unrivaled exhaust systems.
The mufflers in our Axle-Back systems are tuned for each specific application. Due to this they will dramatically reduce, or eliminate drone on the cabin of the vehicle while delivering that great Borla'sound.
Borla'systems are designed for bolt on installation.
We are a company of motorheads, and it shows in our products, customer service, industry-leading Million Mile Warranty, and culture. On weekends, the same Borla employees who built your exhaust or helped you with technical support can be found competing at tracks, drag strips, off-road events and car shows.
Constructed using T-304 stainless steel for long life and sharp appearance, and features all welded construction for maximum durability.
Unlike any other exhaust brand, Borla'systems are designed from scratch on a vehicle-by-vehicle basis. Every car or truck has unique mechanical and acoustical properties, all taken into account as we spend countless hours optimizing muffler body shapes, internal core configurations, flow dynamics, sound and more.
For many applications, Borla gives you a variety of choices for the volume and character of your exhaust note? From a subdued rumble to an all-out roar.
Million-Mile warranty.
Everything we've learned from racing and street performance over nearly four decades is reflected in each product that leaves our facilities.
Made in the USA.
Along with the distinctive Borla "Sound of



PRODUCT NOTES:
Construction - All Welded
Exhaust Type - Axle-Back System
Exit Position - Dual Rear
Exit Style - Dual Split Rear Exit
Inlet Inside Diameter - 2.750 in.
Material - T-304 Stainless Steel
Muffler Type - Straight-Through
Off Road Use Only - No
Outlet Outside Diameter - 2.500 in.
Prop 65 - Long Label - WARNING: This product in the physical form it is sold does not present a hazard. However; operations including; but not limited to welding; brazing; or thermal cutting can expose you to chemicals including Chromium; Nickel; Cobalt; Arsenic; Cadmium and Le


Lethal Performance is proud to offer the entire line of Borla products!
Learn More

Borla Axle-Back Exhaust System - Atak (2016-2020 Camaro) - 11923CB

ATAK Axle-Back Exhaust System for 2016-2020 Chevrolet Camaro SS 6.2L V8 Automatic/ Manual Transmission Rear Wheel Drive 2 Door WITHOUT NPP (dual mode exhaust).

Borla is proud to offer a true "Made in the USA" product sold around the world.
Upgrading your factory exhaust system to a Borla T-304 stainless steel performance Axle-Back system with a more efficient and less restrictive design can improve sound (adding more enjoyment driving your vehicle) and increase engine horsepower and torque throughout the RPM range (allowing quicker acceleration to pass a vehicle or get to highway speeds quicker).
Everywhere you look, Borla's spirit of innovation and excitement screams with the same high-volume clarity as our unrivaled exhaust systems.
The mufflers in our Axle-Back systems are tuned for each specific application. Due to this they will dramatically reduce, or eliminate drone on the cabin of the vehicle while delivering that great Borla'sound.
Borla'systems are designed for bolt on installation.
We are a company of motorheads, and it shows in our products, customer service, industry-leading Million Mile Warranty, and culture. On weekends, the same Borla employees who built your exhaust or helped you with technical support can be found competing at tracks, drag strips, off-road events and car shows.
Constructed using T-304 stainless steel for long life and sharp appearance, and features all welded construction for maximum durability.
Unlike any other exhaust brand, Borla'systems are designed from scratch on a vehicle-by-vehicle basis. Every car or truck has unique mechanical and acoustical properties, all taken into account as we spend countless hours optimizing muffler body shapes, internal core configurations, flow dynamics, sound and more.
For many applications, Borla gives you a variety of choices for the volume and character of your exhaust note? From a subdued rumble to an all-out roar.
Million-Mile warranty.
Everything we've learned from racing and street performance over nearly four decades is reflected in each product that leaves our facilities.
Made in the USA.
Along with the distinctive Borla "Sound of



PRODUCT NOTES:
Construction - All Welded
Exhaust Type - Axle-Back System
Exit Position - Single Rear
Inlet Inside Diameter - 2.750 in.
Material - T-304 Stainless Steel
Off Road Use Only - No
Prop 65 - Long Label - WARNING: This product in the physical form it is sold does not present a hazard. However; operations including; but not limited to welding; brazing; or thermal cutting can expose you to chemicals including Chromium; Nickel; Cobalt; Arsenic; Cadmium and Le
Prop 65 - Short Label - Proposition 65 Warning.JPG
Prop 65 (C, R or CR) - CR
Prop 65 Yes/No - Yes


Lethal Performance is proud to offer the entire line of Borla products!
Learn More

Borla Axle-Back Exhaust System - Atak (2016-2020 Camaro) - 11923CF

ATAK Axle-Back Exhaust System for 2016-2020 Chevrolet Camaro SS 6.2L V8 Automatic/ Manual Transmission Rear Wheel Drive 2 Door WITHOUT NPP (dual mode exhaust).

Borla is proud to offer a true "Made in the USA" product sold around the world.
Upgrading your factory exhaust system to a Borla T-304 stainless steel performance Axle-Back system with a more efficient and less restrictive design can improve sound (adding more enjoyment driving your vehicle) and increase engine horsepower and torque throughout the RPM range (allowing quicker acceleration to pass a vehicle or get to highway speeds quicker).
Everywhere you look, Borla's spirit of innovation and excitement screams with the same high-volume clarity as our unrivaled exhaust systems.
The mufflers in our Axle-Back systems are tuned for each specific application. Due to this they will dramatically reduce, or eliminate drone on the cabin of the vehicle while delivering that great Borla'sound.
Borla'systems are designed for bolt on installation.
We are a company of motorheads, and it shows in our products, customer service, industry-leading Million Mile Warranty, and culture. On weekends, the same Borla employees who built your exhaust or helped you with technical support can be found competing at tracks, drag strips, off-road events and car shows.
Constructed using T-304 stainless steel for long life and sharp appearance, and features all welded construction for maximum durability.
Unlike any other exhaust brand, Borla'systems are designed from scratch on a vehicle-by-vehicle basis. Every car or truck has unique mechanical and acoustical properties, all taken into account as we spend countless hours optimizing muffler body shapes, internal core configurations, flow dynamics, sound and more.
For many applications, Borla gives you a variety of choices for the volume and character of your exhaust note? From a subdued rumble to an all-out roar.
Million-Mile warranty.
Everything we've learned from racing and street performance over nearly four decades is reflected in each product that leaves our facilities.
Made in the USA.
Along with the distinctive Borla "Sound of



PRODUCT NOTES:
Construction - All Welded
Exhaust Type - Axle-Back System
Exit Position - Dual Rear
Exit Style - Single Split Rear Exit
Inlet Inside Diameter - 2.750 in.
Material - T-304 Stainless Steel
Muffler Type - Straight-Through
Off Road Use Only - No
Outlet Outside Diameter - 2.500 in.
Prop 65 - Long Label - WARNING: This product in the physical form it is sold does not present a hazard. However; operations including; but not limited to welding; brazing; or thermal cutting can expose you to chemicals including Chromium; Nickel; Cobalt; Arsenic; Cadmium and Le


Lethal Performance is proud to offer the entire line of Borla products!
Learn More

Borla Axle-Back Exhaust System - Atak (2016-2020 Camaro) - 11923CFBA

ATAK Axle-Back Exhaust System for 2016-2020 Chevrolet Camaro SS 6.2L V8 Automatic/ Manual Transmission Rear Wheel Drive 2 Door WITHOUT NPP (dual mode exhaust).

Borla is proud to offer a true "Made in the USA" product sold around the world.
Upgrading your factory exhaust system to a Borla T-304 stainless steel performance Axle-Back system with a more efficient and less restrictive design can improve sound (adding more enjoyment driving your vehicle) and increase engine horsepower and torque throughout the RPM range (allowing quicker acceleration to pass a vehicle or get to highway speeds quicker).
Everywhere you look, Borla's spirit of innovation and excitement screams with the same high-volume clarity as our unrivaled exhaust systems.
The mufflers in our Axle-Back systems are tuned for each specific application. Due to this they will dramatically reduce, or eliminate drone on the cabin of the vehicle while delivering that great Borla'sound.
Borla'systems are designed for bolt on installation.
We are a company of motorheads, and it shows in our products, customer service, industry-leading Million Mile Warranty, and culture. On weekends, the same Borla employees who built your exhaust or helped you with technical support can be found competing at tracks, drag strips, off-road events and car shows.
Constructed using T-304 stainless steel for long life and sharp appearance, and features all welded construction for maximum durability.
Unlike any other exhaust brand, Borla'systems are designed from scratch on a vehicle-by-vehicle basis. Every car or truck has unique mechanical and acoustical properties, all taken into account as we spend countless hours optimizing muffler body shapes, internal core configurations, flow dynamics, sound and more.
For many applications, Borla gives you a variety of choices for the volume and character of your exhaust note? From a subdued rumble to an all-out roar.
Million-Mile warranty.
Everything we've learned from racing and street performance over nearly four decades is reflected in each product that leaves our facilities.
Made in the USA.
Along with the distinctive Borla "Sound of



PRODUCT NOTES:
Construction - All Welded
Exhaust Type - Axle-Back System
Exit Position - Dual Rear
Exit Style - Single Split Rear Exit
Inlet Inside Diameter - 2.750 in.
Material - T-304 Stainless Steel
Muffler Type - Straight-Through
Off Road Use Only - No
Outlet Outside Diameter - 2.500 in.
Prop 65 - Long Label - WARNING: This product in the physical form it is sold does not present a hazard. However; operations including; but not limited to welding; brazing; or thermal cutting can expose you to chemicals including Chromium; Nickel; Cobalt; Arsenic; Cadmium and Le


Lethal Performance is proud to offer the entire line of Borla products!
Learn More

Borla Axle-Back Exhaust System - S-Type (2016-2020 Camaro) - 11924

S-Type Axle-Back Exhaust System for 2016-2020 Chevrolet Camaro SS 6.2L V8 Automatic/ Manual Transmission Rear Wheel Drive 2 Door Equipped With Dual Mode Exhaust (NPP).

Borla is proud to offer a true "Made in the USA" product sold around the world.
Upgrading your factory exhaust system to a Borla T-304 stainless steel performance Axle-Back system with a more efficient and less restrictive design can improve sound (adding more enjoyment driving your vehicle) and increase engine horsepower and torque throughout the RPM range (allowing quicker acceleration to pass a vehicle or get to highway speeds quicker).
Everywhere you look, Borla's spirit of innovation and excitement screams with the same high-volume clarity as our unrivaled exhaust systems.
The mufflers in our Axle-Back systems are tuned for each specific application. Due to this they will dramatically reduce, or eliminate drone on the cabin of the vehicle while delivering that great Borla'sound.
Borla'systems are designed for bolt on installation.
We are a company of motorheads, and it shows in our products, customer service, industry-leading Million Mile Warranty, and culture. On weekends, the same Borla employees who built your exhaust or helped you with technical support can be found competing at tracks, drag strips, off-road events and car shows.
Constructed using T-304 stainless steel for long life and sharp appearance, and features all welded construction for maximum durability.
Unlike any other exhaust brand, Borla'systems are designed from scratch on a vehicle-by-vehicle basis. Every car or truck has unique mechanical and acoustical properties, all taken into account as we spend countless hours optimizing muffler body shapes, internal core configurations, flow dynamics, sound and more.
For many applications, Borla gives you a variety of choices for the volume and character of your exhaust note? From a subdued rumble to an all-out roar.
Million-Mile warranty.
Everything we've learned from racing and street performance over nearly four decades is reflected in each product that leaves our facilities.
Made in the USA.
Along with the distinctive Borla "Sound of



PRODUCT NOTES:
Construction - All Welded
Exhaust Type - Axle-Back System
Exit Position - Dual Split Rear
Exit Style - Dual Split Rear Exit
Inlet Inside Diameter - 2.750 in.
Material - T-304 Stainless Steel
Muffler Type - Straight-Through
Off Road Use Only - No
Outlet Outside Diameter - 2.500 in.
Prop 65 - Long Label - WARNING: This product in the physical form it is sold does not present a hazard. However; operations including; but not limited to welding; brazing; or thermal cutting can expose you to chemicals including Chromium; Nickel; Cobalt; Arsenic; Cadmium and Le


Lethal Performance is proud to offer the entire line of Borla products!
Learn More

Borla Axle-Back Exhaust System - S-Type (2016-2020 Camaro) - 11924CB

S-Type Axle-Back Exhaust System for 2016-2020 Chevrolet Camaro SS 6.2L V8 Automatic/ Manual Transmission Rear Wheel Drive 2 Door Equipped With Dual Mode Exhaust (NPP).

Borla is proud to offer a true "Made in the USA" product sold around the world.
Upgrading your factory exhaust system to a Borla T-304 stainless steel performance Axle-Back system with a more efficient and less restrictive design can improve sound (adding more enjoyment driving your vehicle) and increase engine horsepower and torque throughout the RPM range (allowing quicker acceleration to pass a vehicle or get to highway speeds quicker).
Everywhere you look, Borla's spirit of innovation and excitement screams with the same high-volume clarity as our unrivaled exhaust systems.
The mufflers in our Axle-Back systems are tuned for each specific application. Due to this they will dramatically reduce, or eliminate drone on the cabin of the vehicle while delivering that great Borla'sound.
Borla'systems are designed for bolt on installation.
We are a company of motorheads, and it shows in our products, customer service, industry-leading Million Mile Warranty, and culture. On weekends, the same Borla employees who built your exhaust or helped you with technical support can be found competing at tracks, drag strips, off-road events and car shows.
Constructed using T-304 stainless steel for long life and sharp appearance, and features all welded construction for maximum durability.
Unlike any other exhaust brand, Borla'systems are designed from scratch on a vehicle-by-vehicle basis. Every car or truck has unique mechanical and acoustical properties, all taken into account as we spend countless hours optimizing muffler body shapes, internal core configurations, flow dynamics, sound and more.
For many applications, Borla gives you a variety of choices for the volume and character of your exhaust note? From a subdued rumble to an all-out roar.
Million-Mile warranty.
Everything we've learned from racing and street performance over nearly four decades is reflected in each product that leaves our facilities.
Made in the USA.
Along with the distinctive Borla "Sound of



PRODUCT NOTES:
Construction - All Welded
Exhaust Type - Axle-Back System
Exit Position - Dual Split Rear
Inlet Inside Diameter - 2.750 in.
Material - T-304 Stainless Steel
Off Road Use Only - No
Prop 65 - Long Label - WARNING: This product in the physical form it is sold does not present a hazard. However; operations including; but not limited to welding; brazing; or thermal cutting can expose you to chemicals including Chromium; Nickel; Cobalt; Arsenic; Cadmium and Le
Prop 65 - Short Label - Proposition 65 Warning.JPG
Prop 65 (C, R or CR) - CR
Prop 65 Yes/No - Yes


Lethal Performance is proud to offer the entire line of Borla products!
Learn More

Borla Axle-Back Exhaust System - S-Type (2016-2020 Camaro) - 11924CFBA

S-Type Axle-Back Exhaust System for 2016-2019 Chevrolet Camaro SS 6.2L V8 Automatic/ Manual Transmission Rear Wheel Drive 2 Door Equipped With Dual Mode Exhaust (NPP).

Borla is proud to offer a true "Made in the USA" product sold around the world.
Upgrading your factory exhaust system to a Borla T-304 stainless steel performance Axle-Back system with a more efficient and less restrictive design can improve sound (adding more enjoyment driving your vehicle) and increase engine horsepower and torque throughout the RPM range (allowing quicker acceleration to pass a vehicle or get to highway speeds quicker).
Everywhere you look, Borla's spirit of innovation and excitement screams with the same high-volume clarity as our unrivaled exhaust systems.
The mufflers in our Axle-Back systems are tuned for each specific application. Due to this they will dramatically reduce, or eliminate drone on the cabin of the vehicle while delivering that great Borla'sound.
Borla'systems are designed for bolt on installation.
We are a company of motorheads, and it shows in our products, customer service, industry-leading Million Mile Warranty, and culture. On weekends, the same Borla employees who built your exhaust or helped you with technical support can be found competing at tracks, drag strips, off-road events and car shows.
Constructed using T-304 stainless steel for long life and sharp appearance, and features all welded construction for maximum durability.
Unlike any other exhaust brand, Borla'systems are designed from scratch on a vehicle-by-vehicle basis. Every car or truck has unique mechanical and acoustical properties, all taken into account as we spend countless hours optimizing muffler body shapes, internal core configurations, flow dynamics, sound and more.
For many applications, Borla gives you a variety of choices for the volume and character of your exhaust note? From a subdued rumble to an all-out roar.
Million-Mile warranty.
Everything we've learned from racing and street performance over nearly four decades is reflected in each product that leaves our facilities.
Made in the USA.
Along with the distinctive Borla "Sound of



PRODUCT NOTES:
Construction - All Welded
Exhaust Type - Axle-Back System
Exit Position - Dual Rear
Exit Style - Dual Split Rear Exit
Inlet Inside Diameter - 2.750 in.
Material - T-304 Stainless Steel
Muffler Type - Straight-Through
Off Road Use Only - No
Outlet Outside Diameter - 2.500 in.
Prop 65 - Long Label - WARNING: This product in the physical form it is sold does not present a hazard. However; operations including; but not limited to welding; brazing; or thermal cutting can expose you to chemicals including Chromium; Nickel; Cobalt; Arsenic; Cadmium and Le


Lethal Performance is proud to offer the entire line of Borla products!
Learn More

Borla Axle-Back Exhaust System - Atak (2016-2020 Camaro) - 11925

ATAK Axle-Back Exhaust System for 2016-2020 Chevrolet Camaro SS 6.2L V8 Automatic/ Manual Transmission Rear Wheel Drive 2 Door Equipped With Dual Mode Exhaust (NPP).

Borla is proud to offer a true "Made in the USA" product sold around the world.
Upgrading your factory exhaust system to a Borla T-304 stainless steel performance Axle-Back system with a more efficient and less restrictive design can improve sound (adding more enjoyment driving your vehicle) and increase engine horsepower and torque throughout the RPM range (allowing quicker acceleration to pass a vehicle or get to highway speeds quicker).
Everywhere you look, Borla's spirit of innovation and excitement screams with the same high-volume clarity as our unrivaled exhaust systems.
The mufflers in our Axle-Back systems are tuned for each specific application. Due to this they will dramatically reduce, or eliminate drone on the cabin of the vehicle while delivering that great Borla'sound.
Borla'systems are designed for bolt on installation.
We are a company of motorheads, and it shows in our products, customer service, industry-leading Million Mile Warranty, and culture. On weekends, the same Borla employees who built your exhaust or helped you with technical support can be found competing at tracks, drag strips, off-road events and car shows.
Constructed using T-304 stainless steel for long life and sharp appearance, and features all welded construction for maximum durability.
Unlike any other exhaust brand, Borla'systems are designed from scratch on a vehicle-by-vehicle basis. Every car or truck has unique mechanical and acoustical properties, all taken into account as we spend countless hours optimizing muffler body shapes, internal core configurations, flow dynamics, sound and more.
For many applications, Borla gives you a variety of choices for the volume and character of your exhaust note? From a subdued rumble to an all-out roar.
Million-Mile warranty.
Everything we've learned from racing and street performance over nearly four decades is reflected in each product that leaves our facilities.
Made in the USA.
Along with the distinctive Borla "Sound of



PRODUCT NOTES:
Construction - All Welded
Exhaust Type - Axle-Back System
Exit Position - Dual Split Rear
Exit Style - Dual Split Rear Exit
Inlet Inside Diameter - 2.750 in.
Material - T-304 Stainless Steel
Muffler Type - Straight-Through
Off Road Use Only - No
Outlet Outside Diameter - 2.500 in.
Prop 65 - Long Label - WARNING: This product in the physical form it is sold does not present a hazard. However; operations including; but not limited to welding; brazing; or thermal cutting can expose you to chemicals including Chromium; Nickel; Cobalt; Arsenic; Cadmium and Le


Lethal Performance is proud to offer the entire line of Borla products!
Learn More