You have no items in your shopping cart.
100% new components and direct bolt in case.
Custom rotor/stator to decrease air gap to improve idle output.
Balanced rotor and 0 run-out slip rings to improve unit life and eliminate battery light flicker.
Heavy duty 12 diode twin rectifier plates
Improved air flow to ensure long service life in severe conditions
NTN premium and NSK USA bearings.
This unit ships with a 69mm pulley and is suitable for stock to 6LB lowers. If you have a larger pulley or spin in excess of 7600rpm with a 6LB lower please specify in your order notes or tell your sales representative when placing your order. No RPM limitation on stock, 2lb, or 4lb lower pulley
270A J2Fab units REQUIRE cable upgrade.
Call for availability, could potentially take up to 2 weeks to ship.
Rated at 185A peak these units offer greater idle performance (up to 140A) with a higher efficiency than our standard Motorcraft 3phase units making them the perfect replacement for our highly successful 200A 6G product line.
When compared to our 200A 6G this unit has an idle output 27% greater, will reach peak output 50% sooner, and will hold its peak output longer making it superior to the old J2Fab-200A and any other 3G or 6G Cobra unit in every practical way
Ideal for cars with high draw from fuel system, A2W trunk mounted pump, H/E fans, stereo, or OEM Cobra’s just looking for an upgrade/replacement with much greater longevity and resistance to overheating!
Customers running a combination of fuel system, Stewart EMP, electric WP, H/E fans and more, please see our 270A Extreme Output.
100% new components and direct bolt in case.
Custom rotor/stator to decrease air gap to improve idle output.
Balanced rotor and 0 run-out slip rings to improve unit life and eliminate battery light flicker.
Heavy duty 12 diode twin rectifier plates
Improved air flow to ensure long service life in severe conditions
NTN premium and NSK USA bearings.
This unit ships with a 69mm pulley and is suitable for stock to 6LB lowers. If you have a larger pulley or spin in excess of 7600rpm with a 6LB lower please specify in your order notes or tell your sales representative when placing your order. No RPM limitation on stock, 2lb, or 4lb lower pulley.
185A J2Fab units REQUIRE cable upgrade. Call for availability, could potentially take up to 2 weeks to ship.
This is the Lethal Performance Cobra Crank Support System. It is designed to take shear/flexing forces off of the crank snout known to damage the #1 main bearing as well as break the snout in higher horsepower applications.
Product Features
21mm Hex on tip of mandrel to allow CW/CCW rotation of engine
Support legs indexed into main plate to eliminate any chance of plate shifting
Multi-axis support gussets that lock bottom stand offs into the pan rails to ensure the strongest and safest method of locating the bearing plate without any chance of shifting or slipping
Integrated crank ring idler, eliminating the need for other AUX systems
1/2" of diagonal pulley travel to make precise tensioner adjustments or aid in belt installation
Supports both 8 and 10 rib IW - Metco hub configurations up to 4lb Rings
Clears stock fan and all accessories.
Note: Innovator's West new style 1-piece balancers require Lethal Performance adapter option
Note: Cast Aluminum Pans may require some modification to work.
Note: Requires Innovators West Crank Pulley with Metco Hub. See options above to add to order.
Learn MoreOut of stock