J2 Fabrication
SKU : J2F-185A
J2 Fabrication Denso Hairpin High-Output Alternator (03/04 Cobra)
Rated at 185A peak these units offer greater idle performance (up to 140A) with a higher efficiency than our standard Motorcraft 3phase units making them the perfect replacement for our highly successful 200A 6G product line.

When compared to our 200A 6G this unit has an idle output 27% greater, will reach peak output 50% sooner, and will hold its peak output longer making it superior to the old J2Fab-200A and any other 3G or 6G Cobra unit in every practical way



Ideal for cars with high draw from fuel system, A2W trunk mounted pump, H/E fans, stereo, or OEM Cobra’s just looking for an upgrade/replacement with much greater longevity and resistance to overheating!



Customers running a combination of fuel system, Stewart EMP, electric WP, H/E fans and more, please see our 270A Extreme Output.



100% new components and direct bolt in case.

Custom rotor/stator to decrease air gap to improve idle output.

Balanced rotor and 0 run-out slip rings to improve unit life and eliminate battery light flicker.

Heavy duty 12 diode twin rectifier plates

Improved air flow to ensure long service life in severe conditions

NTN premium and NSK USA bearings.

This unit ships with an OEM diameter pulley and is suitable for stock and 2lb lowers. If you have a larger pulley or spin in excess of 7200rpm please specify in your order notes or tell your sales representative when placing your order.



185A J2Fab units require cable upgrade.
$375.00
⚠  WARNING : Cancer and Reproductive Harm - www.P65Warnings.ca.gov. freeshipping
Description

Details

Rated at 185A peak these units offer greater idle performance (up to 140A) with a higher efficiency than our standard Motorcraft 3phase units making them the perfect replacement for our highly successful 200A 6G product line.
When compared to our 200A 6G this unit has an idle output 27% greater, will reach peak output 50% sooner, and will hold its peak output longer making it superior to the old J2Fab-200A and any other 3G or 6G Cobra unit in every practical way

Ideal for cars with high draw from fuel system, A2W trunk mounted pump, H/E fans, stereo, or OEM Cobra’s just looking for an upgrade/replacement with much greater longevity and resistance to overheating!

Customers running a combination of fuel system, Stewart EMP, electric WP, H/E fans and more, please see our 270A Extreme Output.

100% new components and direct bolt in case.
Custom rotor/stator to decrease air gap to improve idle output.
Balanced rotor and 0 run-out slip rings to improve unit life and eliminate battery light flicker.
Heavy duty 12 diode twin rectifier plates
Improved air flow to ensure long service life in severe conditions
NTN premium and NSK USA bearings.
This unit ships with an OEM diameter pulley and is suitable for stock and 2lb lowers. If you have a larger pulley or spin in excess of 7200rpm please specify in your order notes or tell your sales representative when placing your order.

185A J2Fab units require cable upgrade.
Install Info
No Document Available
Reviews

Be the first to review this product

Write Your Own Review

Vehicle Fitment
  • Mustang Cobra 2003,2004
No Document Available