Details
Fabtech 5" Crawler C/O W/ Dlss 2.5 C/O Resi And Rr Dlss Resi 2007-18 Jeep Jk 4-Door (2007-2018 Wrangler, Wrangler JK) - K4079DL
5" CRAWLER C/O W/ DLSS 2.5 C/O RESI AND RR DLSS RESI 2007-18 JEEP JK 4-DOOR
In-field testing and multiple vehicle fit checks ensure products will fit properly during installation and provide years of trouble free service with superior vehicle ride qualities.
This heavy duty Crawler Coilover system replaces all eight link arms with extended length units for aggressive offroad use while providing superior on road driving characteristics. The links are mounted up high on the frame for maximum ground clearance. The large link arms pivot on Fabtech 5 Ton Joints for reliability and a quiet ride with a lifetime warranty. System includes 1/4'' thick steel Track Bar brackets that weld on. It?s the strongest way to relocate the Track Bars for proper roll center front and rear that will not fail and leave you stranded. The bolt on front Dirt Logic 2.5 Coilover conversion provides outstanding high speed damping with the ability to crawl at low speed with maximum articulation for big rocks. Coilover is mounted on top of the centerline of the axle to prevent premature Link Arm bushing wear leading to poor handling. Dual rate coil springs provide factory load carrying capacity with a smooth ride. The flexible coil design offers an extended travel range for aggressive rock crawling with great highway manners. Includes 8 Long Arm Links & Mounts, Coilover Hoop Kit Front, Long Travel Rear Coil Springs, Track Bar Brackets Front & Rear, Sway Bar Links Front & Rear, Pitman Arm, Brake Lines Front & Rear, E Brake Bracket, Rear Bump Stop Brackets, Front Dirt Logic 2.5 Coilovers w/ Reservoirs and Rear Dirt Logic 2.25 Shocks w/ Reservoirs.
Located in Chino, California our headquarters spans across five acres. The custom building was constructed to Fabtech's specification for in house development, manufacturing, distribution and administration. The 100,000 square foot facility is divided into designated departments that can operate as a single unit or collectively as a group. This allows Fabtech to function 24 hours a day as needed without compromising security, capacity or quality of the operations. Fabtech's development capabilities are second to none with over 25 years of experience in aftermarket suspension design. State of the art software, fabrication equipment along with our seasoned engineers and fabricators allow the company to develop products that are constantly on the cutting edge. Fabtech has received numerous awards for our designs that continue to lead the market. Proper design in suspension development is key in providing a quality, trouble free product to the end consumer. Fabtech leads the industry with extensive research, design technology and rigorous testing that results in the highest performing, finest quality suspension system for the discerning offroad enthusiast. New vehicle platforms now require a full integration of the vehicles electronics and sensors into the suspension design in order for the vehicle to properly function. Fabtech has invested into proprietary development processes and technologies to aid in properly designing new vehicle suspension systems that lead the industry. To ensure product quality, Fabtech builds all of its componentry in house. The manufacturing division is a world class lean environment dedicated to consistently producing quality parts in low or high volume production runs. Multiple laser cutters, robotic welders, forming equipment, machining centers and skilled welders provide flexibility and quality to its production. Packaging, warehousing and distribution are contained within the building for immediate shipment worldwide.
