You have no items in your shopping cart.
After you free up the majority of the turbo air intake restriction with our Steeda Cold Air intake for your 2.0L EcoBoost Focus ST, you can finish the intake system off and gain up to 5 more horsepower over the 10 to 12 horsepower the cold air kit already provides with our Steeda Focus ST Cold Air Inlet Tube Intake for 2015-2018 MK3 Ford Focus ST.
Manufactured from high-quality aluminum material, this Steeda Focus ST Cold Air Inlet Tube Intake directly replaces the air intake hose between the cold air intake box and the turbo inlet, removing what little restriction is left in the intake system. Being made from aluminum will keep the weight down and crank the performance up!
Purchase your Steeda Focus ST Cold Air Inlet Tube Intake for your EcoBoost at Steeda Autosports today!
Note: To be used with Steeda Cold Air Intake ONLY
Steeda's Focus ST Ram Air Intake Scoop for 2013-2018 MK3 Ford Focus ST allows your intake to receive the most direct and non-turbulent cold air straight from the front of the car. The more direct induction of fresh air creates lower air inlet temperatures, resulting in horsepower and torque increase.
Unlike our competitors' products, the Steeda Focus ST Ram Air Intake Scoop is far superior in that it allows for a more natural "velocity effect," in which air flows from a large opening to a smaller entrance in the intake - resulting in direct, free-flowing, and cooler air. Best of all, it's compatible with stock and aftermarket cold air intakes!
Purchase your Steeda Focus ST Ram Air Intake Scoop for your 2013-2018 2.0L EcoBoost Focus ST at Steeda Autosports today!
Get 7-10 dyno tested HP over a stock intake! With less restriction and more surface area this High-Flow Air Kit is a great source of power. Dyno-proven to outperform other air intake systems available today. An easy bolt-on for the garage mechanic and can be done in under one hour. Will not trip check engine light.
Read more about the advantages in Steeda Mustang Cold Air Intakes over the competitors on our blog: https://www.steedablog.com/2012/03/mustang-cold-air-intake-truth/
Warning: Not approved for sale in California or states that require a California E.O. #. This part has been designed and is intended for off-road application only. Installation of this part on a vehicle that is driven on public roads may violate U.S. and Canadian laws and regulations.
Note: Federal and several state and provincial laws prohibit the removal, modification or rendering inoperative of any part that affects emissions or safety on motor vehicles used on public streets or highways. Steeda Autosports assumes no liability for any violations arising out of any federal, state or provincial emissions or safety requirements on motor vehicles arising out of the customer's modifications and/or use of Steeda products. It is the responsibility of the customer to determine if their modified vehicle complies with applicable laws.
This limited warranty is the only express warranty applicable to Steeda Autosports products. Other rights may arise or vary from state to state in the United States. Steeda is not responsible for any time for which you may lose the use of your vehicle, any inconvenience you might be caused, the loss of your transportation or any part thereof, or any other incidental or consequential damages you may have.
Steeda's Pro-Flow Inlet Elbow was designed specifically for our very popular S197 Mustang Cold Air Intake.
The Pro-Flow intake tube is available in a high temperature heat resistant plastic, or available in real carbon fiber.
The high quality construction allows for colder air induction system temperatures resulting in less heat soak and lower air charge temperatures than competitive brands using metal tubes.
We have seen gains up to 8 horsepower and 8 ft lbs of torque to the tires throughout the entire power-band!!!
No additional tune is needed for this kit if you are already using a Steeda cold air intake with SCT or Diablo tuning package and installation is quick and simple. This kit includes gloss blue, or black, 4 ply silicone hose connectors, stainless steel hose clamps and instructions.
555-3141 - Black Silicone Hose Upgrade
This Black Silicone upgrade kit is designed for the S197 GT Mustangs. You can replace the blue hoses with these black ones to match your car better! Fit's Steeda CAI for GT S197's (555-3130 & 555-3131) and Ford Racing CAI with the Steeda upgraded elbow.
Note: Will work with FRPP intakes but will require retuning if using FRPP's tune with one of our SCT tuners.