Currently Shopping by:
You have no items in your shopping cart.
After you free up the majority of the turbo air intake restriction with our Steeda Cold Air intake for your 2.0L EcoBoost Focus ST, you can finish the intake system off and gain up to 5 more horsepower over the 10 to 12 horsepower the cold air kit already provides with our Steeda Focus ST Cold Air Inlet Tube Intake for 2015-2018 MK3 Ford Focus ST.
Manufactured from high-quality aluminum material, this Steeda Focus ST Cold Air Inlet Tube Intake directly replaces the air intake hose between the cold air intake box and the turbo inlet, removing what little restriction is left in the intake system. Being made from aluminum will keep the weight down and crank the performance up!
Purchase your Steeda Focus ST Cold Air Inlet Tube Intake for your EcoBoost at Steeda Autosports today!
Note: To be used with Steeda Cold Air Intake ONLY
Steeda's Focus ST Ram Air Intake Scoop for 2013-2018 MK3 Ford Focus ST allows your intake to receive the most direct and non-turbulent cold air straight from the front of the car. The more direct induction of fresh air creates lower air inlet temperatures, resulting in horsepower and torque increase.
Unlike our competitors' products, the Steeda Focus ST Ram Air Intake Scoop is far superior in that it allows for a more natural "velocity effect," in which air flows from a large opening to a smaller entrance in the intake - resulting in direct, free-flowing, and cooler air. Best of all, it's compatible with stock and aftermarket cold air intakes!
Purchase your Steeda Focus ST Ram Air Intake Scoop for your 2013-2018 2.0L EcoBoost Focus ST at Steeda Autosports today!
This billet 6061 aluminum insert fits all Steeda CAI's with a 101mm mass air meters and allows for you to flash your computer back to stock. This is due to Steeda's exclusive velocity stack design and high flow air filter while maintaining all the factory cold air feeds.
The best part of both these kits is, once you want to upgrade to a Steeda performance tune you can! Simply remove the billet insert from the mass air meter and enjoy even more tire burning horse power and torque!!
Like all Steeda manufactured parts, this too features an exclusive lifetime warranty.
This part is not approved for sale in California or states that require a California E.O. # and is intended for off-road and competition use only. Installation of this part on a vehicle that is driven on public roads may violate U.S. laws and/or regulations. It is the responsibility of the customer to determine if their modified vehicle complies with applicable laws. For more information, please visit our Terms & Conditions page.
Get 7-10 dyno tested HP over a stock intake! With less restriction and more surface area this High-Flow Air Kit is a great source of power. Dyno-proven to outperform other air intake systems available today. An easy bolt-on for the garage mechanic and can be done in under one hour. Will not trip check engine light.
Read more about the advantages in Steeda Mustang Cold Air Intakes over the competitors on our blog: https://www.steedablog.com/2012/03/mustang-cold-air-intake-truth/
Warning: Not approved for sale in California or states that require a California E.O. #. This part has been designed and is intended for off-road application only. Installation of this part on a vehicle that is driven on public roads may violate U.S. and Canadian laws and regulations.
Note: Federal and several state and provincial laws prohibit the removal, modification or rendering inoperative of any part that affects emissions or safety on motor vehicles used on public streets or highways. Steeda Autosports assumes no liability for any violations arising out of any federal, state or provincial emissions or safety requirements on motor vehicles arising out of the customer's modifications and/or use of Steeda products. It is the responsibility of the customer to determine if their modified vehicle complies with applicable laws.
This limited warranty is the only express warranty applicable to Steeda Autosports products. Other rights may arise or vary from state to state in the United States. Steeda is not responsible for any time for which you may lose the use of your vehicle, any inconvenience you might be caused, the loss of your transportation or any part thereof, or any other incidental or consequential damages you may have.
Steeda's intake resonator delete is designed specifically for the Ford Fusion. Made in-house out of Billet 6061 aluminum it's designed to replace the restrictive factory resonator. Not only a great way to dress up your engine bay with ether the Steeda or the Fusion logo but a more aggressive intake tone should be noticed at Wide Open Throttle (WOT).
Steeda's cold air high-flow intake for the 03-04 Cobra features a reusable dual cone filter with more surface area than single cone models to flow the most air.
The Steeda high velocity air intake features a stainless steel heat shield that seals against the hood shielding more of the air from the engine compartment heat than the competitions models.
This intake is good for 14 to 18 RWHP on a stock Cobra and has been dyno tested in our Pompano Beach facility to add up to 25 RWHP on a modified Cobra.
All the necessary hardware is included for a direct bolt-on installation. Used in cars exceeding 600 rear wheel horsepower!
Read more about the advantages in Steeda Mustang Cold Air Intakes over the competitors on our blog: https://www.steedablog.com/2012/03/mustang-cold-air-intake-truth/
Warning: Not approved for sale in California or states that require a California E.O. #. This part has been designed and is intended for off-road application only. Installation of this part on a vehicle that is driven on public roads may violate U.S. and Canadian laws and regulations.
Note: Federal and several state and provincial laws prohibit the removal, modification or rendering inoperative of any part that affects emissions or safety on motor vehicles used on public streets or highways. Steeda Autosports assumes no liability for any violations arising out of any federal, state or provincial emissions or safety requirements on motor vehicles arising out of the customer's modifications and/or use of Steeda products. It is the responsibility of the customer to determine if their modified vehicle complies with applicable laws.
This limited warranty is the only express warranty applicable to Steeda Autosports products. Other rights may arise or vary from state to state in the United States. Steeda is not responsible for any time for which you may lose the use of your vehicle, any inconvenience you might be caused, the loss of your transportation or any part thereof, or any other incidental or consequential damages you may have.
Steeda's popular cold air intake is not only a great choice for stock manifold 2015-2017 Mustangs but now thanks to our new kit, the GT350 manifold as well! This kit comes with a silicone adapter that will allow the Steeda ProFlow tune required S550 Cold air intake to work with the GT350 intake manifold.
Steeda ProFlow Mustang Cold Air Intake for your S550 opens up the intake system of Ford's 5.0 powerplant and allows it to breathe much more freely than the stock intake system allows, taking your S550 Mustang GT to the next level of performance. Steeda's engineers utilized the OE cold air feed and a large surface area high-flow nano-fiber air filter, added our famous 'race-tested' velocity stack entry and then designed an advanced heat shield with a durable rubber gasket to seal the shield against the vehicle's hood. Steeda's precision CNC mass air housing provides the cleanest mass air signal on the market, resulting in smooth off-throttle to on-throttle response.
Warning: Not approved for sale in California or states that require a California E.O. #. This part has been designed and is intended for off-road application only. Installation of this part on a vehicle that is driven on public roads may violate U.S. and Canadian laws and regulations. Note: Federal and several state and provincial laws prohibit the removal, modification or rendering inoperative of any part that affects emissions or safety on motor vehicles used on public streets or highways. Steeda Autosports assumes no liability for any violations arising out of any federal, state or provincial emissions or safety requirements on motor vehicles arising out of the customer's modifications and/or use of Steeda products. It is the responsibility of the customer to determine if their modified vehicle complies with applicable laws. This limited warranty is the only express warranty applicable to Steeda Autosports products. Other rights may arise or vary from state to state in the United States. Steeda is not responsible for any time for which you may lose the use of your vehicle, any inconvenience you might be caused, the loss of your transportation or any part thereof, or any other incidental or consequential damages you may have.
Product Benefits:
The new 2016 MK3 Ford Focus RS is a fantastic performance platform that while already very good, can still be taken to the next level. Take the intake system of your 2.3L EcoBoost Focus RS to the next level with our in-house designed, tested, and manufactured Steeda Focus RS Cold Air Intake.
This Steeda Focus RS Cold Air Intake for the 2016 Focus RS does not require any ECM tuning making it an easy direct bolt-on. With peak to peak gains of 10 horsepower at the wheels and max gains of up to 16 horsepower, these are performance gains you will definitely feel. Our system incorporates a roto-molded thermoplastic airbox with a thermoplastic velocity stack, a high-flow serviceable air filter, and a silicone intake tube.
Better intake temperatures. The Steeda cold air intake gives your Mk3 Focus RS better intake air temperatures, this results in better performance and improved fuel economy. The lower IATs are a result of the design of the airbox, high flow filter, and the precision-molded thermoplastic velocity stack. The airbox was designed to utilize the cold air feed coming from the grille while sealing directly to the hood liner to ensure a cool, dense air charge to the engine.
Warning: Not approved for sale in California or states that require a California E.O. #. This part has been designed and is intended for off-road application only. Installation of this part on a vehicle that is driven on public roads may violate U.S. and Canadian laws and regulations.
Note: Federal and several state and provincial laws prohibit the removal, modification or rendering inoperative of any part that affects emissions or safety on motor vehicles used on public streets or highways. Steeda Autosports assumes no liability for any violations arising out of any federal, state or provincial emissions or safety requirements on motor vehicles arising out of the customer's modifications and/or use of Steeda products. It is the responsibility of the customer to determine if their modified vehicle complies with applicable laws.
This limited warranty is the only express warranty applicable to Steeda Autosports products. Other rights may arise or vary from state to state in the United States. Steeda is not responsible for any time for which you may lose the use of your vehicle, any inconvenience you might be caused, the loss of your transportation or any part thereof, or any other incidental or consequential damages you may have.
Steeda's high flow air intake for the 2.3L and 2.5L Fusion is like 2 intakes in one all-inclusive kit!
Our high flow cold air intake includes an insert allowing you to use it as a direct bolt on intake kit with no tuning required or remove the insert to for even more airflow and combine it with a custom tune for THE most powerful kit on the market for your Fusion.
Steeda's high flow intake also features a stainless steel heat shield and high flow cone-style air filter for great airflow and low intake air inlet temperatures and improved gas mileage.
Gain of up to 8hp and 10ft/lbs of torque are possible with the insert in place. More to be had with no insert and custom tuning.
Fitment Note: Not compatible will hybrid models.
Warning: Not approved for sale in California or states that require a California E.O. #. This part has been designed and is intended for off-road application only. Installation of this part on a vehicle that is driven on public roads may violate U.S. and Canadian laws and regulations.
Note: Federal and several state and provincial laws prohibit the removal, modification or rendering inoperative of any part that affects emissions or safety on motor vehicles used on public streets or highways. Steeda Autosports assumes no liability for any violations arising out of any federal, state or provincial emissions or safety requirements on motor vehicles arising out of the customer's modifications and/or use of Steeda products. It is the responsibility of the customer to determine if their modified vehicle complies with applicable laws.
This limited warranty is the only express warranty applicable to Steeda Autosports products. Other rights may arise or vary from state to state in the United States. Steeda is not responsible for any time for which you may lose the use of your vehicle, any inconvenience you might be caused, the loss of your transportation or any part thereof, or any other incidental or consequential damages you may have.