By popular demand, Watson Racing brings you the production Drag Race aluminum Intercooler Ice Tank for your S197 Mustang! This tank was available 2013 for the original equipment on our factory-built Drag Race and Road Race Cars and is intended to be used with the Coyote engine, though it may work with other applications. Measuring 16-inches tall, the Watson Ice Tank holds approximately 2.5 gallons of water and/or ice. The large metal lid twists off with a few turns revealing a HUGE 4-inch diameter hole, making it easy to add ice while you’re in the pits. Features half-inch NPT fittings (inlet, outlet, drain), making it super flexible to add nearly any –AN or pipe fittings you need to suit your application. Lightweight aluminum, powder coated for life-long good looks.Learn More

Complete half moon shaped ice tanks that sit in spare tire well. These are complete kits that are listed in stages. All these half moon tanks here will come standard with extra large black cap, with the option to put a black/clear cap. Note the black and clear caps have been known to crack at the clear center due to excess heat in trunk. I recommend the full black cap or the black and red ring cap. The black/red ring cap is the best out there for sealing. It has ten mounting bolts instead of 6 like the standard one, and has outside threads. The black and red cap will not fit flush under carpet.

Stage one, 5 gallon half moon tank with 1100 gph pump. 3/4” hose and install kit. Pretty much complete ready for install, minus wiring. This is budget friendly kit that allows you to pump ice water up front. This fits flush in all Mustang trunks under carpet. Comes with pump, 50' heat insulate hose, insulated clamps, snap clamps for fittings, brass drain, fused relay, all hardware.

Stage two (Most Popular), 7 gallon with 2000 gph rule pump. This comes complete with hose and installation kit. Comes with pump, 50' heat insulate hose, insulated clamps, snap clamps for fittings, brass drain, fused relay, all hardware.

Stage three, 7 gallon with Jabsco cyclone pump, hose and install kit. Pump is external pump and flows very good. This kit is still budget friendly but works really well and flows great. Comes with pump, 50' heat insulate hose, insulated clamps, snap clamps for fittings, brass drain, fused relay, all hardware.

Stage four, 7 gallon half moon tank with Stewart EMP 4600rpm pump. This is the top flowing pump for the intercooler system. Comes with correct fitting size to feed the pump and still use your factory intercooler and heat exchanger. Comes with pump, 50' heat insulate hose, insulated clamps, snap clamps for fittings, brass drain, fused relay, all hardware. Learn More

Fits 05-14 Spare Tire Wells
Tig Welded .125 Thick Aluminum
New Leak Free 10" Lid with 8" Opening for Easy Ice Fill
Powdercoated Wrinkle Black to Minimize Tank Sweating
No Show Welds on Exterior of Tank makes for a cleaner look
Simply mount, add your preferred fittings and wire 12v to tank with a 15 amp inline fuse.
Tank is Powdercoated Hammertone Black. 1" NPT inlet and outlet,
Learn More

Fits 05-14 Spare Tire Wells
Tig Welded .125 Thick Aluminum
New Leak Free 10" Lid with 8" Opening for Easy Ice Fill
Powdercoated Wrinkle Black to Minimize Tank Sweating
No Show Welds on Exterior of Tank makes for a cleaner look
Simply mount, add your preferred fittings and wire 12v to tank with a 15 amp inline fuse.
Tank is Powdercoated Hammertone Black. 1" NPT inlet and outlet,
Learn More

Two separate tanks integrated together to look like one Directly bolts in place of factory installed coolant and supercharger tanks Tanks are oversized to aid in cooling, supercharged cars run hot so increased cooling capacity is a must for horsepower Coolant tank accept factory screw on cap and Super Charger tank has a fuel cell style cap Fabricated of aluminum for strength – can be polished, chromed, powder coated or left as-is for a race look Can be packed with ice for the track or dyno pulls for quicker E.T’S and more horsepower Includes heavy duty mounting bracket

Learn More

Two separate tanks integrated together to look like one Directly bolts in place of factory installed coolant and supercharger tanks Tanks are oversized to aid in cooling, supercharged cars run hot so increased cooling capacity is a must for horsepower Both tanks accept factory screw on caps Fabricated of aluminum for strength – can be polished, chromed, powder coated or left as-is for a race look Can be packed with ice for the track or dyno pulls for quicker E.T’S and more horsepower Includes heavy duty mounting bracket

Learn More

M-H Racing Shelby GT500 "The Tank" Intercooler/Radiator Reservoir (Uses Stock Caps)

"THE TANK"

You've heard about it and probably seen pictures of it online somewhere. Well now you can purchase it exclusively from your friends at Lethal Performance

Constructed of .120 5053 aluminum, this is the strongest tank in the industry. All fittings are precision machined from billet aluminum, not just a cheap tack weld to hold on the hose like those on others. Innovative mounting bracket makes this tank bolt in firmly. The Tank holds 104 fl. oz. (over twice the stock capacity); which helps in cooling of the intercooler system.

There is no tank on the market that looks better and cleans up the engine bay like this one … It looks like a factory piece!

Features include:
Bolt in, direct replacement, no modifications needed. Larger capacity over stock, Lowers IAT when packed with ice, faster cool down, uses the stock screw style caps, custom machined aluminum cap threads and fittings. Powder coated to match your factory blower, and valve covers.

Learn More