Call us for help 1.877.253.8425 or 1.561.753.8105
You have no items in your shopping cart.
These 2005-2014 Mustang Caster Camber kit will Improve the handling on your 05-14 Ford Mustang V6, GT and GT500. BBK Part# 2551 It allows the independent adjustment of the front wheels caster and camber to help improve overall front end alignment to improve your Mustang's front end suspension geometry. This improves steering input and offers better handling. This fully adjustable BBK Caster camber kit is recommended when lowering any Mustang and replaces your stock, non-adjustable components. They will help you gain better, more predictable cornering and handling even at the limit. This caster camber kit has been designed and developed by BBK Performance to be fully adjustable and provide a wider range of adjustment than other kits on the market. This allows you to fine-tune your suspension for improved steering response and crisp cornering for the street or track. Simple installation - requires the use of spring compressors (recommended) This BBK caster camber kit is designed for all 2005-2014 Mustangs.
The Caster and Camber Eccentric Kit contains everything you need to adjust the caster and camber on your 2005-2014 Mustang
Fits 2005-2014 Mustang
Kit contains:
J&M Products is proud to release our completely redesigned fully adjustable protected under US Patent No. 8,820,759 and patents pending Camber & Caster plate assembly for the 2005-2010 Ford Mustangs. This Camber/Caster kits is the only kit that comes complete READY to bolt in right out of the box (no need to swap anything over from the factory mount). Whether you are using the car for street, autocross, road racing or drag racing these plates are designed for you. These are the only plates that have an offset design allowing for you to install them in the street orientation or a race orientation allowing for the most camber adjustment available compared to any other plate on the market. Just like our other Camber/Caster plates these come with a full lifetime warranty to the original purchaser of the product.
Benefits:
Shelby 05-11 Mustang Caster Camber Plate Kit
These Shelby American camber/caster plates are designed to provide better performance and handling, especially in applications where the car has been lowered. In applications where the car has been lowered, the top of the front tires tend to "lean in" towards the center of the car, resulting in rapid and/or uneven tire wear. This excessive negative camber can be easily corrected with our caster/camber plates.
Applications:
2005-2010 Ford and Shelby Mustangs.
Specifications
Bolts on! No drilling or cutting required.
1.6-degree continuous range of camber adjustment provides alignment correction on lowered cars, and is adjustable without affecting caster.
0.7-degree continuous range of caster adjustment provides correction for OEM production tolerances.
Caster and camber are easily adjusted at the top of the strut tower.
The range of suspension travel can be shifted, allowing for additional bump travel on lowered cars.
Teflon® lined spherical bearing eliminates deflection and precisely locates the strut shaft, while still allowing the required articulation.
High-tech composite thrust bearing transfers the spring load into the strut tower.
All parts are either plated or powder coated for great looks and long lasting protection.
Lowered vehicles as much 2.5 inches can still be aligned to factory specifications.
Installation Instructions:
Click here to download in Adobe PDF.
QA1 2011 Mustang Caster/Camber Plates
**THESE CC PLATES WILL ONLY WORK WITH QA1 FRONT STRUTS OR QA1 COILOVER KIT. THEY WILL NOT WORK WITH ANY OTHER STRUT INCLUDING THE STOCK ONES**
QA1 once again leads the industry by developing a specifically engineered asymmetric bearing for caster/camber plate applications. Through this innovative design, the bearing allows for improved load distribution that significantly reduces wear and increases durability eliminating "sloppy bearings" which result in road noise and poor handling characteristics.
QA1’s high quality caster/camber plates for race applications offer many features not found in other brands. For example, the bearing housing is tig-welded for the utmost in strength and durability. This kit provides caster and camber changes for the ultimate in adjustability.
Fitment: Will only work with QA1 front struts (part # H2004 or H 2011 ) and QA1 coil over kit (part # MU150, MU175, MU200, MU225 or MU250).
Learn More
Eibach 05-2013 Mustang Pro-Alignment Camber Bolts
| ||
After the installation of either an Eibach PRO-KIT, SPORTLINE spring kit or PRO-STREET, R1, R2 coil-over kit, a vehicle's alignment should always be checked. Once a vehicle is lowered, wheel camber may become excessively negative, meaning the top of the tire is angled inward (toward the center of the vehicle). While some negative camber aids in improving traction and road adhesion, too much can result in compromised handling and accelerated tire wear.
Eibach offers a complete range of PRO-ALIGNMENT kits, which provide a simple, affordable solution to correct excessive negative camber. These alignment kits not only assist in adjusting a vehicle's camber back to factory specifications, but they also allow an experienced chassis tuner to utilize the increased adjustment range to "dial-in" a performance-oriented alignment that uses negative camber to maximize a chassis' true potential. With correct alignment, turn-in becomes more precise and handling becomes gratifyingly crisp and predictable. High-speed stability is also enhanced, making an Eibach PRO-ALIGNMENT kit a necessity for the serious performance tuner.
For the extreme lowering of SPORTLINE and PRO-STREET-S, MULTI-PRO-R1/R2 coil-over applications, look for the alignment kits with a greater range of adjustment. These will be listed below the standard PRO-ALIGNMENT kit in the applications section.
Learn More
