Oil Separators and Valve Cover Breathers

Bob's Auto Sports Ultimate GT500 Passenger Side Catch Can / Oil Separator

$249.95

| Add to Compare

Ultimate GT500 Pass side Catch Can / Oil separator

Strut tower mount only. Kit is complete with Red/blue AN fittings, Russel proclassic hose, heat shrink hose clamps, and of course the Bob's Auto Sports catch can. The kit has the hoses pre-cut and installed on can (left on the long side so you can trim if desired)

07-12 GT500 Oil Seperator

Keep HP robbing oil out of your intake with Bob's Auto Sports oil seperator. Full kit, includes bracket, hoses and all mounting hardware, as well as detailed instructions. Developed to eliminate oil from entering your intake by engine blow-by, which channels oil contaminated air into your supercharger intake. A key problem caused by oil in the intake is that it reduces the octane of your fuel and causes detonation especially in turbo, supercharger and nitrous applications. Featuring a large chamber, and superior filtering media, this is the unit to have. Draining the fluid is easy with a valve in the bottom. USA made, this unit is built to last. Free shipping in the 48 states. International customers welcome, just contact us for a shipping quote.

Finishes :

Brushed finish
Piano Black Powder coat
Silver "polished" finish
Carbon fiber hydro finish

USA and International Patents

Learn More

Bob's Auto Sports Ultimate GT500 Driver Side Catch Can / Oil Separator

$249.95

| Add to Compare

Ultimate GT500 Pass side Catch Can / Oil separator

Strut tower mount only. Kit is complete with Red/blue AN fittings, Russel proclassic hose, heat shrink hose clamps, and of course the Bob's Auto Sports catch can. The kit has the hoses pre-cut and installed on can (left on the long side so you can trim if desired)

07-12 GT500 Oil Seperator

Keep HP robbing oil out of your intake with Bob's Auto Sports oil seperator. Full kit, includes bracket, hoses and all mounting hardware, as well as detailed instructions. Developed to eliminate oil from entering your intake by engine blow-by, which channels oil contaminated air into your supercharger intake. A key problem caused by oil in the intake is that it reduces the octane of your fuel and causes detonation especially in turbo, supercharger and nitrous applications. Featuring a large chamber, and superior filtering media, this is the unit to have. Draining the fluid is easy with a valve in the bottom. USA made, this unit is built to last. Free shipping in the 48 states. International customers welcome, just contact us for a shipping quote.

Finishes :

Brushed finish
Piano Black Powder coat
Silver "polished" finish
Carbon fiber hydro finish

USA and International Patents

Learn More

Mishimoto Carbon Fiber Baffled Oil Catch Can (Universal)

$361.95

| Add to Compare

FEATURES
Patent pending
3K twill weave carbon fiber catch can body reduces weight and improves engine bay aesthetics
1/4 turn lid makes checking levels quick while still providing an air-tight seal
7.4 fluid ounce capacity lengthens service intervals
Cyclone baffle's blades are designed using computational fluid dynamics for improved air-oil separation
High-flow filter adds extra layer of protection without affecting PCV/CCV pressures on high-boost applications
Universal CNC billet bracket mounts the can securely
Safe for pressurized applications
Filter and can are fully serviceable
Optional Mishimoto 90° Swivel Banjo Fitting and available baffled oil catch can petcock drain kit
Mishimoto Lifetime WarrantyLearn More

Fathouse Fabrications Race Catch Can for 05-14 Mustangs

$349.99

| Add to Compare

This race version catch can mounts in place of your factory battery on your 2005-2014 Mustang.

Catch Can Features:

2x 10AN or 12AN Inlet Fittings
2x Air Filters for venting
1/8″ NPT Drain bung – Includes plug or add optional drain kit
Large Capacity – Holds up to 4 liters
Easy installation
Mounts into factory bolt locations
Offered in both raw aluminum and Black coated

To finish out your catch can install you can purchase optional line/fitting kits offered in standard pushlock rubber hose and braided hose ends. The line kit will include 12AN valve cover fittings and all the necessary hose and fittings to connect your catch can to your engine. We also offer a nice pet cock drain valve kit to make emptying the catch can a breeze.Learn More

Moroso 07-2014 Shelby GT500 Small Body Air Oil Separator (Black)

$200.99

| Add to Compare

General Information
*Please note: May not apply to all kits

Plumbed into a vehicle's PCV system to capture the excess crankcase vapors, residual oil mist and moisture from reentering the intake tract
Vehicles from the factory vent these excess crankcase vapors, residual oil mist and moisture right back into the intake manifold which could cause detonation, oil deposits to form in the intake tract including the valves themselves and from lowering the efficiency of the intercooler in intercooler equipped vehicles
Increases engine performance from cleaner intake air
Air-Oil Separators have billet aluminum bodies with internal baffling and mesh media
Includes heavy duty brass inlet and outlet fittings, Fuel/Emission/PCV Vapor hose, stainless steel mounting bracket and billet aluminum mounting clamp for the body of the separator
Some Vehicle crankcase ventilation systems require that 2 Air-Oil Separator bodies be used to properly capture and ventilate the system

Moroso Air-Oil Separators are available in 2 sizes, not all kits are available with both size body

Air-Oil Separator Kits, Large Body
The original size, 43% more capacity than the Small Body Version
Features a bottom drain with elbow that makes draining the collected oil virtually mess-free
Polished body can be chromed, painted, or powder coated for a custom look

Air-Oil Separator Kits, Small Body
Smaller size fits in more applications and some customers prefer the smaller size body
Two piece body unscrews for draining
Available with a polished or black anodized finishLearn More

Moroso 07-2014 Shelby GT500 Large Body Air Oil Separator

$211.99

| Add to Compare

General Information
*Please note: May not apply to all kits

Plumbed into a vehicle's PCV system to capture the excess crankcase vapors, residual oil mist and moisture from reentering the intake tract
Vehicles from the factory vent these excess crankcase vapors, residual oil mist and moisture right back into the intake manifold which could cause detonation, oil deposits to form in the intake tract including the valves themselves and from lowering the efficiency of the intercooler in intercooler equipped vehicles
Increases engine performance from cleaner intake air
Air-Oil Separators have billet aluminum bodies with internal baffling and mesh media
Includes heavy duty brass inlet and outlet fittings, Fuel/Emission/PCV Vapor hose, stainless steel mounting bracket and billet aluminum mounting clamp for the body of the separator
Some Vehicle crankcase ventilation systems require that 2 Air-Oil Separator bodies be used to properly capture and ventilate the system

Moroso Air-Oil Separators are available in 2 sizes, not all kits are available with both size body.

Air-Oil Separator Kits, Large Body
The original size, 43% more capacity than the Small Body Version
Features a bottom drain with elbow that makes draining the collected oil virtually mess-free
Polished body can be chromed, painted, or powder coated for a custom look

Air-Oil Separator Kits, Small Body
Smaller size fits in more applications and some customers prefer the smaller size body
Two piece body unscrews for draining
Available with a polished or black anodized finishLearn More