There is nothing like the aggressive look of a car with the right stance! Over time, stock springs sag, get rusty, and simply wear out. BMR Suspension believes the right springs go beyond looks—your 1979-2004 Mustang needs to perform, too! All BMR springs are manufactured from chrome silicon high-tensile spring wire, and are cold wound on a CNC coiling machine. The CNC coiling head can adjust the spring diameter in real time to ensure that every spring is exactly the same. This guarantees that your right spring matches your left spring. Every BMR spring is compressed solid at the factory, not once, but twice. This gives the spring its permanent set, and guarantees no sag. BMR springs are stress-relieved at 750 degrees F, ensuring most stresses induced during the winding process are eliminated. All springs are then shot-peened to eliminate residual surface stresses. Many spring manufacturers skip this step, but BMR insists on this operation as part of our spring manufacturing process. Every spring is computer tested as the last step—every spring, not just a sample from each batch. Each spring is loaded in the spring tester at the factory, then compressed and the CNC load cell measures the force for a variety of spring lengths. This allows BMR to offer a LIFETIME WARRANTY against spring sag.

Blending aesthetics and performance, BMR has designed the SP028 for the street performance crowd who want to use their cars in a variety of application. These springs will drop the front end of your 1979-2004 Ford Mustang 1-inch, and feature a fine-tuned spring rate to give you great handling and a smooth ride. The linear spring rate offers plenty of support, keeping the body flat and level in the corners, while remaining soft enough for a comfortable ride on any road. When performance and looks are a must, rely on BMR Suspension!

BMR Suspension’s SP028 lowering springs are available in red powder coat for long-lasting good looks. Installation time is about 2-3 hours.

Learn More

Lowering the center of gravity not only provides visual appeal, it also dramatically improves the handling ability of your Mustang. BMR lowering springs are specifically designed to provide optimal handling without sacrificing ride quality. Our extensive development time produced what we feel to be the optimal rates for this application. By using a 525 lb/in front spring and a 235 lb/in rear spring the car responds with a firm yet comfortable ride with much improved handling characteristics.

Learn More

Maximum Motorsports 79-04 Mustang Urethane Front Spring Isolators (Set)

What are spring isolators, and why do I even need them?
The spring isolators, along with most of the other rubber parts in automobile suspensions, are primarily a noise and vibration isolation feature. The spring isolators, additionally, will affect the ride height of the car. The compressed height of the spring isolators (upper and lower, or lack of isolators if they are gone!) changes the ride height of the car. The factory rubber isolators do not last very long, and compress significantly with very little time. Even new cars that are swapping springs when nearly new have shown significant permanent compresson of the isolators. These polyurethane isolators will restore a little amount of ride height due to heavily collapsed isolators in an older car, and help provide noise isolation that may be lost from missing or destroyed isolators. Ride height values quoted for the H&R springs we sell are based on using new urethane spring isolators. We recommend replacing these whenever you remove springs during any service, if they haven't already been replaced. It's a hard lesson learned when you find they are worn out, when you have your car already torn apart and need to drive it tomorrow!Learn More

Eibach 96-04 Mustang V8 PRO Kit Lowering Springs (Convertible)

 

Excludes IRS equipped models!

Lowers Vehicle:

1.3" Front

1.4" Rear

The Eibach Pro-Kit is the perfect answer for most frequently-driven street cars. Their legendary spring system that dramatically improves both performance and appearance.

Pro-Kit lowers your car's center of gravity, reducing squat during acceleration, body roll in corners and excessive nose-dive under braking. When combined with upgraded wheels and tires, the Eibach Pro-Kit is the finishing touch to a winning recipe for performance. Pro-Kit also reduces excessive fender-well clearance, making your car look just as hot as it performs.

Every Eibach Pro-Kit is designed and tested by suspension engineers and performance driving professionals, to deliver aggressive good looks and high performance handling, without ever compromising safety or ride quality. By using Eibach's proprietary, progressive spring design, Pro-Kit provides the ultimate balance to take your passion for driving to a whole new level.

Features & Benefits :

• High Performance Handling
• Lower Center of Gravity
• Stop Quicker, Corner Faster and get Better MPG
• Progressive Spring Design for Excellent Ride Quality
• Million Mile Warranty

Learn More