Accufab offers high performance throttle bodies and spacers for your 1986-1993 Ford 5.0L Mustang. Replace your restrictive stock throttle body with one of our top of the line units and get your 5.0L the air it's lacking.

Better Air Flow for More Power: This upgrade will improve your Mustangs throttle response and horsepower. It's the perfect starting point for future modifications. In addition, spacers are offered as an option in combination with our throttle bodies.

Exceptional Quality: Accufab throttle bodies and spacers are CNC machined from 6061-T6 billet aluminum and the exterior is polished to an eye-catching finish. The shafts are also CNC machined from stainless for durability and quality, with brass blades and the highest quality bushings, bearings and screws. Manufactured in the USA.

Available Versions: Accufab's 65mm throttle body is available in Standard and Race versions.

Application: This 65mm Accufab throttle body and throttle body in combination with spacer is specifically designed as a direct bolt on for use on the 1986 - 1993 Ford Mustang 5.0L.

Technical Notes: Idle speed should only be set by adjusting the throttle position sensor. DO NOT adjust any screws on the throttle body. These screws are pre-set at Accufab.

Accessories Included: The throttle body gasket, IAC gasket and EGR gaskets are included where applicable. No mounting hardware available.

Learn More

Accufab offers high performance throttle bodies and spacers for your 1986-1993 Ford 5.0L Mustang. Replace your restrictive stock throttle body with one of our top of the line units and get your 5.0L the air it's lacking.

Better Air Flow for More Power: This upgrade will improve your Mustangs throttle response and horsepower. It's the perfect starting point for future modifications. In addition, spacers are offered as an option in combination with our throttle bodies.

Exceptional Quality: Accufab throttle bodies and spacers are CNC machined from 6061-T6 billet aluminum and the exterior is polished to an eye-catching finish. The shafts are also CNC machined from stainless for durability and quality, with brass blades and the highest quality bushings, bearings and screws. Manufactured in the USA.

Available Versions: Accufab's 65mm throttle body is available in Standard and Race versions.

Application: This 65mm Accufab throttle body and throttle body in combination with spacer is specifically designed as a direct bolt on for use on the 1986 - 1993 Ford Mustang 5.0L.

Technical Notes: Idle speed should only be set by adjusting the throttle position sensor. DO NOT adjust any screws on the throttle body. These screws are pre-set at Accufab.

Accessories Included: The throttle body gasket, IAC gasket and EGR gaskets are included where applicable. No mounting hardware available.

Learn More

Accufab offers high performance throttle bodies and spacers for your 1986-1993 Ford 5.0L Mustang. Replace your restrictive stock throttle body with one of our top of the line units and get your 5.0L the air it's lacking.

Better Air Flow for More Power: This upgrade will improve your Mustangs throttle response and horsepower. It's the perfect starting point for future modifications. In addition, spacers are offered as an option in combination with our throttle bodies.

Exceptional Quality: Accufab throttle bodies and spacers are CNC machined from 6061-T6 billet aluminum and the exterior is polished to an eye-catching finish. The shafts are also CNC machined from stainless for durability and quality, with brass blades and the highest quality bushings, bearings and screws. Manufactured in the USA.

Available Versions: Accufab's 65mm throttle body is available in Standard and Race versions.

Application: This 65mm Accufab throttle body and throttle body in combination with spacer is specifically designed as a direct bolt on for use on the 1986 - 1993 Ford Mustang 5.0L.

Technical Notes: Idle speed should only be set by adjusting the throttle position sensor. DO NOT adjust any screws on the throttle body. These screws are pre-set at Accufab.

Accessories Included: The throttle body gasket, IAC gasket and EGR gaskets are included where applicable. No mounting hardware available.

Learn More

Accufab offers high performance throttle bodies and spacers for your 1986-1993 Ford 5.0L Mustang. Replace your restrictive stock throttle body with one of our top of the line units and get your 5.0L the air it's lacking.

Better Air Flow for More Power: This upgrade will improve your Mustangs throttle response and horsepower. It's the perfect starting point for future modifications. In addition, spacers are offered as an option in combination with our throttle bodies.

Exceptional Quality: Accufab throttle bodies and spacers are CNC machined from 6061-T6 billet aluminum and the exterior is polished to an eye-catching finish. The shafts are also CNC machined from stainless for durability and quality, with brass blades and the highest quality bushings, bearings and screws. Manufactured in the USA.

Available Versions: Accufab's 65mm throttle body is available in Standard and Race versions.

Application: This 65mm Accufab throttle body and throttle body in combination with spacer is specifically designed as a direct bolt on for use on the 1986 - 1993 Ford Mustang 5.0L.

Technical Notes: Idle speed should only be set by adjusting the throttle position sensor. DO NOT adjust any screws on the throttle body. These screws are pre-set at Accufab.

Accessories Included: The throttle body gasket, IAC gasket and EGR gaskets are included where applicable. No mounting hardware available.

Learn More

Accufab offers high performance throttle bodies and spacers for your 1986-1993 Ford 5.0L Mustang. Replace your restrictive stock throttle body with one of our top of the line units and get your 5.0L the air it's lacking.

Better Air Flow for More Power: This upgrade will improve your Mustangs throttle response and horsepower. It's the perfect starting point for future modifications. In addition, spacers are offered as an option in combination with our throttle bodies.

Exceptional Quality: Accufab throttle bodies and spacers are CNC machined from 6061-T6 billet aluminum and the exterior is polished to an eye-catching finish. The shafts are also CNC machined from stainless for durability and quality, with brass blades and the highest quality bushings, bearings and screws. Manufactured in the USA.

Available Versions: Accufab's 65mm throttle body is available in Standard and Race versions.

Application: This 65mm Accufab throttle body and throttle body in combination with spacer is specifically designed as a direct bolt on for use on the 1986 - 1993 Ford Mustang 5.0L.

Technical Notes: Idle speed should only be set by adjusting the throttle position sensor. DO NOT adjust any screws on the throttle body. These screws are pre-set at Accufab.

Accessories Included: The throttle body gasket, IAC gasket and EGR gaskets are included where applicable. No mounting hardware available.

Learn More

Accufab offers high performance throttle bodies and spacers for your 1986-1993 Ford 5.0L Mustang. Replace your restrictive stock throttle body with one of our top of the line units and get your 5.0L the air it's lacking.

Better Air Flow for More Power: This upgrade will improve your Mustangs throttle response and horsepower. It's the perfect starting point for future modifications. In addition, spacers are offered as an option in combination with our throttle bodies.

Exceptional Quality: Accufab throttle bodies and spacers are CNC machined from 6061-T6 billet aluminum and the exterior is polished to an eye-catching finish. The shafts are also CNC machined from stainless for durability and quality, with brass blades and the highest quality bushings, bearings and screws. Manufactured in the USA.

Available Versions: Accufab's 65mm throttle body is available in Standard and Race versions.

Application: This 65mm Accufab throttle body and throttle body in combination with spacer is specifically designed as a direct bolt on for use on the 1986 - 1993 Ford Mustang 5.0L.

Technical Notes: Idle speed should only be set by adjusting the throttle position sensor. DO NOT adjust any screws on the throttle body. These screws are pre-set at Accufab.

Accessories Included: The throttle body gasket, IAC gasket and EGR gaskets are included where applicable. No mounting hardware available.

Learn More

Accufab offers high performance throttle bodies and spacers for your 1986-1993 Ford 5.0L Mustang. Replace your restrictive stock throttle body with one of our top of the line units and get your 5.0L the air it's lacking.

Better Air Flow for More Power: This upgrade will improve your Mustangs throttle response and horsepower. It's the perfect starting point for future modifications. In addition, spacers are offered as an option in combination with our throttle bodies.

Exceptional Quality: Accufab throttle bodies and spacers are CNC machined from 6061-T6 billet aluminum and the exterior is polished to an eye-catching finish. The shafts are also CNC machined from stainless for durability and quality, with brass blades and the highest quality bushings, bearings and screws. Manufactured in the USA.

Available Versions: Accufab's 65mm throttle body is available in Standard and Race versions.

Application: This 65mm Accufab throttle body and throttle body in combination with spacer is specifically designed as a direct bolt on for use on the 1986 - 1993 Ford Mustang 5.0L.

Technical Notes: Idle speed should only be set by adjusting the throttle position sensor. DO NOT adjust any screws on the throttle body. These screws are pre-set at Accufab.

Accessories Included: The throttle body gasket, IAC gasket and EGR gaskets are included where applicable. No mounting hardware available.

Learn More

Accufab offers high performance throttle bodies and spacers for your 1986-1993 Ford 5.0L Mustang. Replace your restrictive stock throttle body with one of our top of the line units and get your 5.0L the air it's lacking.

Better Air Flow for More Power: This upgrade will improve your Mustangs throttle response and horsepower. It's the perfect starting point for future modifications. In addition, spacers are offered as an option in combination with our throttle bodies.

Exceptional Quality: Accufab throttle bodies and spacers are CNC machined from 6061-T6 billet aluminum and the exterior is polished to an eye-catching finish. The shafts are also CNC machined from stainless for durability and quality, with brass blades and the highest quality bushings, bearings and screws. Manufactured in the USA.

Available Versions: Accufab's 65mm throttle body is available in Standard and Race versions.

Application: This 65mm Accufab throttle body and throttle body in combination with spacer is specifically designed as a direct bolt on for use on the 1986 - 1993 Ford Mustang 5.0L.

Technical Notes: Idle speed should only be set by adjusting the throttle position sensor. DO NOT adjust any screws on the throttle body. These screws are pre-set at Accufab.

Accessories Included: The throttle body gasket, IAC gasket and EGR gaskets are included where applicable. No mounting hardware available.

Learn More