Mustang, Taurus, Ranger - Series '58' or '59' battery cover.

Battery Sizes:
Series 58 - 6.8" x 9.5" (Length x Width).
Series 58 Optima - 6.8" x 9.6" (Length x Width).
Series 59 - 7.4" x 9.6" (Length x Width).

Please select your application above (Series 58 or 59).
Battery series is indicated on the side, or the top of the battery. There is a series of numbers with either a 58 or 59 in the midst of those numbers.
Whether you still have the battery that came stock from the factory, replaced it with an OEM battery, or even if you bought a nicer after market piece - in our opinion, they all leave a lot to be desired in the 'looks' department.
In our constant effort to clean up under your hood, our mission is to keep your eyes (or perhaps a judge at a car show) from straying to parts, or areas under the hood that are not attractive.
This piece covers one of the worst looking pieces, your ugly battery, and rather than looking at the battery, replaces it with a sharp looking textured ABS cover.
The battery cover is not only a clean, sharp looking piece, it fits nicely on top of your battery. It has been formed to fit snugly around your battery side blanket (not a necessary piece however) that came stock from the factory.

What's included:
(1) ABS Battery Cover.
(2) 1" Industrial Velcro Pieces for mounting.Learn More

Mustang, Taurus, Ranger - Series '58' or '59' battery cover.

Battery Sizes:
Series 58 - 6.8" x 9.5" (Length x Width).
Series 58 Optima - 6.8" x 9.6" (Length x Width).
Series 59 - 7.4" x 9.6" (Length x Width).

Please select your application above (Series 58 or 59).
Battery series is indicated on the side, or the top of the battery. There is a series of numbers with either a 58 or 59 in the midst of those numbers.
Whether you still have the battery that came stock from the factory, replaced it with an OEM battery, or even if you bought a nicer after market piece - in our opinion, they all leave a lot to be desired in the 'looks' department.
In our constant effort to clean up under your hood, our mission is to keep your eyes (or perhaps a judge at a car show) from straying to parts, or areas under the hood that are not attractive.
This piece covers one of the worst looking pieces, your ugly battery, and rather than looking at the battery, replaces it with a sharp looking textured ABS cover.
The battery cover is not only a clean, sharp looking piece, it fits nicely on top of your battery. It has been formed to fit snugly around your battery side blanket (not a necessary piece however) that came stock from the factory.

What's included:
(1) ABS Battery Cover.
(2) 1" Industrial Velcro Pieces for mounting.Learn More

Mustang, Taurus, Ranger - Series '58' or '59' battery cover.

Battery Sizes:
Series 58 - 6.8" x 9.5" (Length x Width).
Series 58 Optima - 6.8" x 9.6" (Length x Width).
Series 59 - 7.4" x 9.6" (Length x Width).

Please select your application above (Series 58 or 59).
Battery series is indicated on the side, or the top of the battery. There is a series of numbers with either a 58 or 59 in the midst of those numbers.
Whether you still have the battery that came stock from the factory, replaced it with an OEM battery, or even if you bought a nicer after market piece - in our opinion, they all leave a lot to be desired in the 'looks' department.
In our constant effort to clean up under your hood, our mission is to keep your eyes (or perhaps a judge at a car show) from straying to parts, or areas under the hood that are not attractive.
This piece covers one of the worst looking pieces, your ugly battery, and rather than looking at the battery, replaces it with a sharp looking textured ABS cover.
The battery cover is not only a clean, sharp looking piece, it fits nicely on top of your battery. It has been formed to fit snugly around your battery side blanket (not a necessary piece however) that came stock from the factory.

What's included:
(1) ABS Battery Cover.
(2) 1" Industrial Velcro Pieces for mounting.Learn More

Application: 1994 thru 2004 Mustang with Factory hoods
Doesn't Fit: Vehicles with aftermarket hoods require special handling
Installation: 30 minutes, No special tools, No drilling!

MRT Hood Struts for the 1994-2004 Mustangs eliminate the need for the factory hood prop rod and give a clean, functional "performance look" to your underhood appearance. Our No-Drill Hood Struts give show car Mustangs an impressive look that sets them apart from the crowd, helping the Mustang Get Noticed! These hood struts are designed to work with the factory OE hood and to reuse existing factory hood attachment points -- No drilling required!

MRT hood strut brackets are made out of high-quality steel for the utmost durability and come standard with a quality Black Powder Coat Finish. Custom bracket colors are available for an additional fee and come in 2 options: Carbon Fiber look or vehicle matching color. Common bracket color codes are listed. If you don't see your vehicle code select "Factory Paint Code" and add the paint code you want in the order notes. Allow 1 week lead time for custom painted hood strut brackets.

Application: All 1994-2004 Mustang OE Factory Hood
Doesn't Fit: 1994-2004 Aftermarket hoods - contact the sales team to determine proper gas strut sizing (you'll need to provide your Hood's weight)

Get Noticed
Can the bracket match my vehicle? Yes, custom colors are available for an additional fee.
How do I determine my vehicle paint code? 2-digit code is located in the driver side door jamb
Do I have to drill holes in my vehicle? No, MRT Hood struts reuse the existing OE attachments.
Is this product made in the USA? Yes, designed, crafted and manufactured in the USA at MRT's Plymouth, MI location
Learn More

Application: 1994 thru 2004 Mustang with Factory hoods
Doesn't Fit: Vehicles with aftermarket hoods require special handling
Installation: 30 minutes, No special tools, No drilling!

MRT Hood Struts for the 1994-2004 Mustangs eliminate the need for the factory hood prop rod and give a clean, functional "performance look" to your underhood appearance. Our No-Drill Hood Struts give show car Mustangs an impressive look that sets them apart from the crowd, helping the Mustang Get Noticed! These hood struts are designed to work with the factory OE hood and to reuse existing factory hood attachment points -- No drilling required!

MRT hood strut brackets are made out of high-quality steel for the utmost durability and come standard with a quality Black Powder Coat Finish. Custom bracket colors are available for an additional fee and come in 2 options: Carbon Fiber look or vehicle matching color. Common bracket color codes are listed. If you don't see your vehicle code select "Factory Paint Code" and add the paint code you want in the order notes. Allow 1 week lead time for custom painted hood strut brackets.

Application: All 1994-2004 Mustang OE Factory Hood
Doesn't Fit: 1994-2004 Aftermarket hoods - contact the sales team to determine proper gas strut sizing (you'll need to provide your Hood's weight)

Get Noticed
Can the bracket match my vehicle? Yes, custom colors are available for an additional fee.
How do I determine my vehicle paint code? 2-digit code is located in the driver side door jamb
Do I have to drill holes in my vehicle? No, MRT Hood struts reuse the existing OE attachments.
Is this product made in the USA? Yes, designed, crafted and manufactured in the USA at MRT's Plymouth, MI location
Learn More

Application: 1994 thru 2004 Mustang with Factory hoods
Doesn't Fit: Vehicles with aftermarket hoods require special handling
Installation: 30 minutes, No special tools, No drilling!

MRT Hood Struts for the 1994-2004 Mustangs eliminate the need for the factory hood prop rod and give a clean, functional "performance look" to your underhood appearance. Our No-Drill Hood Struts give show car Mustangs an impressive look that sets them apart from the crowd, helping the Mustang Get Noticed! These hood struts are designed to work with the factory OE hood and to reuse existing factory hood attachment points -- No drilling required!

MRT hood strut brackets are made out of high-quality steel for the utmost durability and come standard with a quality Black Powder Coat Finish. Custom bracket colors are available for an additional fee and come in 2 options: Carbon Fiber look or vehicle matching color. Common bracket color codes are listed. If you don't see your vehicle code select "Factory Paint Code" and add the paint code you want in the order notes. Allow 1 week lead time for custom painted hood strut brackets.

Application: All 1994-2004 Mustang OE Factory Hood
Doesn't Fit: 1994-2004 Aftermarket hoods - contact the sales team to determine proper gas strut sizing (you'll need to provide your Hood's weight)

Get Noticed
Can the bracket match my vehicle? Yes, custom colors are available for an additional fee.
How do I determine my vehicle paint code? 2-digit code is located in the driver side door jamb
Do I have to drill holes in my vehicle? No, MRT Hood struts reuse the existing OE attachments.
Is this product made in the USA? Yes, designed, crafted and manufactured in the USA at MRT's Plymouth, MI location
Learn More

NEW OEM Matching Textured Finish

JLT's fender to fender textured black radiator support cover for ALL 1999-04 Mustangs.

Until now all you can get is a cheap stainless cover that only covers the center and is just bend metal.

Here we have a custom designed cover that covers the center AND the headlight areas. We also extended the cover to cover the radiator hold down brackets for an added touch.

Hood Lifters Are Required

Manufactured in the USA by JLT

Includes new mounting hardware and is very easy to install.

Learn More

Billet Pro Shop's billet aluminum inserts for the 1993-2014 4.6 / 5.4 application are a great add-on to dress up your engine. These inserts are either hard black anodized OR polished and include new seals and stainless steel hardware.

Qty: 20 inserts, 20 seals, 20 bolts

Learn More