These 2005-2014 Mustang Caster Camber kit will Improve the handling on your 05-14 Ford Mustang V6, GT and GT500. BBK Part# 2551 It allows the independent adjustment of the front wheels caster and camber to help improve overall front end alignment to improve your Mustang's front end suspension geometry. This improves steering input and offers better handling. This fully adjustable BBK Caster camber kit is recommended when lowering any Mustang and replaces your stock, non-adjustable components. They will help you gain better, more predictable cornering and handling even at the limit. This caster camber kit has been designed and developed by BBK Performance to be fully adjustable and provide a wider range of adjustment than other kits on the market. This allows you to fine-tune your suspension for improved steering response and crisp cornering for the street or track. Simple installation - requires the use of spring compressors (recommended) This BBK caster camber kit is designed for all 2005-2014 Mustangs.

Learn More

The Caster and Camber Eccentric Kit contains everything you need to adjust the caster and camber on your 2005-2014 Mustang

Fits 2005-2014 Mustang

Kit contains:

New from UPR the 2005-2014 Mustang Steel Caster Camber Plates for Viking Coil Over Struts. Our caster camber plates replace the stock flexible strut mounts allowing you to install Viking Coil Over Struts for a fully adjustable from end and giving you better control of the front suspension geometry.

Features Tig welded construction, Teflon lined bearing, Stainless steel bushings spacers and is Zinc plated for a durable yet clean finish.

Product Features:

1 to 1.5 Hour Install
Silver Zinc Plated Finish
Steel Caster Camber Plates
Adjusts both Caster and Camber
High Quality CNC Machined Steel
Fits Viking Coil Over Struts Only! (J234, J334)Learn More

These KellTrac S197 Mustang Caster Camber Plates for 2005-2014 Mustangs are necessary for the installation and proper alignment of coilover kits that utilize a 5/8" shaft.

FEATURES:
-CNC Machining for Superior Design
-Hard coated Black for durability and corrosion resistance
-Precision fitment for maximized performance
-Minimal NoiseVibrationHarshness Increase

BENEFITS:
-Allows installation of coilovers
-Allows proper alignment to be achieved
-Reduces Strut Mount Deflection Learn More

Maximum Motorsports 05-09 Mustang Caster Camber Plates

Lowered Mustangs
Lowering your Mustang will cause the top of the front tires to lean in towards the center of the car, resulting in rapid and/or uneven tire wear. This excessive negative camber can be easily corrected with the Maximum Motorsports Caster/Camber Plates. Even a Mustang lowered as much as 2.5 inches can still be aligned to factory specifications.

Bolts on! No drilling or cutting required.

1.6-degree continuous range of camber adjustment provides alignment correction on lowered cars, and is adjustable without affecting caster.

0.7-degree continuous range of caster adjustment provides correction for OEM production tolerances.

Caster and camber are easily adjusted at the top of the strut tower.

The range of suspension travel can be shifted, allowing for additional bump travel on lowered cars. Teflon lined spherical bearing eliminates deflection and precisely locates the strut shaft, while still allowing the required articulation.

High-tech composite thrust bearing transfers the spring load into the strut tower.

All parts are either plated or powder coated for great looks and long lasting protection.

Warranty: Maximum Motorsports Caster/Camber Plates part #Mm5CC-1 have a limited lifetime warranty against spherical bearing failure or plate failure. That's right - If you wear out the spherical bearing, or break the plates while driving, we will replace that component for free. This warranty applies to the original retail purchaser of genuine MM Caster/Camber Plates. Learn More

J&M Products is proud to release our completely redesigned fully adjustable protected under US Patent No. 8,820,759 and patents pending Camber & Caster plate assembly for the 2005-2010 Ford Mustangs. This Camber/Caster kits is the only kit that comes complete READY to bolt in right out of the box (no need to swap anything over from the factory mount). Whether you are using the car for street, autocross, road racing or drag racing these plates are designed for you. These are the only plates that have an offset design allowing for you to install them in the street orientation or a race orientation allowing for the most camber adjustment available compared to any other plate on the market. Just like our other Camber/Caster plates these come with a full lifetime warranty to the original purchaser of the product.

Benefits:

Allows for camber and caster adjustment not available from the factory
Allows you to align your Mustang back to factory specifications even when lowered over 2.5 inches.
Camber & caster are adjustable separately.
Offset design allows for either street use or race use alignments.
Provides for caster adjustment not found on the factory mounts
Caster adjustment to allow correction for OEM production tolerances.
Alignment is easily adjusted at the top of the strut tower.
Spherical bearing eliminates un-wanted deflection and precisely locates the strut shaft during cornering.
Completely assembled and bolts in with no need for extra drilling or cutting.
ONLY kit that includes everything needed to install all the way down to the rubber spring isolator.
Unlike competitors you don’t need to remove parts from the factory mount and install on our mount.

Product Features:

Over 2.5 degrees of camber adjustment, adjustable without affecting caster.
0.7 degrees of range of caster adjustment.
PTFE lined spherical bearing manufactured in the USA.
All parts are either plated or powder coated for great looks and long lasting protection.
Protected under US Patent No. 8,820,759 and patents pending.
Lifetime warranty on the entire camber plate to the original owner.Learn More

Shelby 05-11 Mustang Caster Camber Plate Kit

These Shelby American camber/caster plates are designed to provide better performance and handling, especially in applications where the car has been lowered.  In applications where the car has been lowered, the top of the front tires tend to "lean in" towards the center of the car, resulting in rapid and/or uneven tire wear. This excessive negative camber can be easily corrected with our caster/camber plates.

Applications:
2005-2010 Ford and Shelby Mustangs.

Specifications
Bolts on! No drilling or cutting required.
1.6-degree continuous range of camber adjustment provides alignment correction on lowered cars, and is adjustable without affecting caster.
0.7-degree continuous range of caster adjustment provides correction for OEM production tolerances.
Caster and camber are easily adjusted at the top of the strut tower.
The range of suspension travel can be shifted, allowing for additional bump travel on lowered cars.
Teflon® lined spherical bearing eliminates deflection and precisely locates the strut shaft, while still allowing the required articulation.
High-tech composite thrust bearing transfers the spring load into the strut tower.
All parts are either plated or powder coated for great looks and long lasting protection.
Lowered vehicles as much 2.5 inches can still be aligned to factory specifications.

Installation Instructions:
Click here to download in Adobe PDF.

Learn More