You have no items in your shopping cart.
Steeda's new Cold Air Kit for the S197 produces the greatest power gains of any Cold Air Kit on the market. Testing has shown increases of up to 38 HP and 30 ft lbs of Torque to the rear wheels with Steeda's Cold Air Kit combined with our Custom SCT Tune.
" SCT has seen the highest horsepower and torque results while using Steeda's Cold Air Kit, over any other brand. " - Chris Johnson, President of SCT Tuning
Steeda's lifetime filter can be cleaned and re-oiled, but the big news here is that we've streamlined the airflow in the S197 Mustang to the point that a computer re-flash isn't just an option, it's required! Check out the SCT X4 - the perfect tool for the job! Or check out our power pack featuring a package savings on our cold air/tuner combo!
The kit is supplied with a stainless steel air box with built-in velocity stack. It mounts in the factory location with the supplied rubber trim to seal it against the hood & fender to keep the hot air out. Our tests showed inlet temps a mere 5 degrees above ambient temperature. The Steeda Lifetime Filter can easily be cleaned and re-oiled, making maintenance a snap. All hardware required for installation is included in the kit.
Note: Use of Steeda's Cold Air Intake REQUIRES a tune under if not used with our Steeda CAI Restrictor which requires NO TUNE
Independent test results have proven gains of over 4 HP and 5 ft/lbs of Torque over the entire RPM range of the so called 'leading brands'.
Used by the top tuners in the industry.
This part is not approved for sale in California or states that require a California E.O. # and is intended for off-road and competition use only. Installation of this part on a vehicle that is driven on public roads may violate U.S. laws and/or regulations. It is the responsibility of the customer to determine if their modified vehicle complies with applicable laws. For more information, please visit our Terms & Conditions page.
Steeda's Pro-Flow Inlet Elbow was designed specifically for our very popular S197 Mustang Cold Air Intake.
The Pro-Flow intake tube is available in a high temperature heat resistant plastic, or available in real carbon fiber.
The high quality construction allows for colder air induction system temperatures resulting in less heat soak and lower air charge temperatures than competitive brands using metal tubes.
We have seen gains up to 8 horsepower and 8 ft lbs of torque to the tires throughout the entire power-band!!!
No additional tune is needed for this kit if you are already using a Steeda cold air intake with SCT or Diablo tuning package and installation is quick and simple. This kit includes gloss blue, or black, 4 ply silicone hose connectors, stainless steel hose clamps and instructions.
555-3141 - Black Silicone Hose Upgrade
This Black Silicone upgrade kit is designed for the S197 GT Mustangs. You can replace the blue hoses with these black ones to match your car better! Fit's Steeda CAI for GT S197's (555-3130 & 555-3131) and Ford Racing CAI with the Steeda upgraded elbow.
Note: Will work with FRPP intakes but will require retuning if using FRPP's tune with one of our SCT tuners.
Steeda's Pro-Flow Inlet Elbow was designed specifically for our very popular S197 Mustang Cold Air Intake.
The Pro-Flow intake tube is available in a high temperature heat resistant plastic, or available in real carbon fiber.
The high quality construction allows for colder air induction system temperatures resulting in less heat soak and lower air charge temperatures than competitive brands using metal tubes.
We have seen gains up to 8 horsepower and 8 ft lbs of torque to the tires throughout the entire power-band!!!
No additional tune is needed for this kit if you are already using a Steeda cold air intake with SCT or Diablo tuning package and installation is quick and simple. This kit includes gloss blue, or black, 4 ply silicone hose connectors, stainless steel hose clamps and instructions.
555-3141 - Black Silicone Hose Upgrade
This Black Silicone upgrade kit is designed for the S197 GT Mustangs. You can replace the blue hoses with these black ones to match your car better! Fit's Steeda CAI for GT S197's (555-3130 & 555-3131) and Ford Racing CAI with the Steeda upgraded elbow.
Note: Will work with FRPP intakes but will require retuning if using FRPP's tune with one of our SCT tuners.
Steeda's new Cold Air Kit for the S197 produces the greatest power gains of any Cold Air Kit on the market. Testing has shown increases of up to 38 HP and 30 ft lbs of Torque to the rear wheels with Steeda's Cold Air Kit combined with our Custom SCT Tune.
" SCT has seen the highest horsepower and torque results while using Steeda's Cold Air Kit, over any other brand. " - Chris Johnson, President of SCT Tuning
Steeda's lifetime filter can be cleaned and re-oiled, but the big news here is that we've streamlined the airflow in the S197 Mustang to the point that a computer re-flash isn't just an option, it's required! Check out the SCT XCalibrator 4 - the perfect tool for the job! Or check out our power pack featuring a package savings on our cold air/tuner combo!
The kit is supplied with a stainless steel air box with built-in velocity stack. It mounts in the factory location with the supplied rubber trim to seal it against the hood & fender to keep the hot air out. Our tests showed inlet temps a mere 5 degrees above ambient temperature. The Steeda Lifetime Filter can easily be cleaned and re-oiled, making maintenance a snap. All hardware required for installation is included in the kit.
Warning: Not approved for sale in California or states that require a California E.O. #. This part has been designed and is intended for off-road application only. Installation of this part on a vehicle that is driven on public roads may violate U.S. and Canadian laws and regulations
Note: Use of Steeda's Cold Air Intake REQUIRES a tune under if not used with our Steeda CAI Restrictor which requires NO TUNE
Independent test results have proven gains of over 4 HP and 5 ft/lbs of Torque over the entire RPM range of the so called 'leading brands'.
Used by the top tuners in the industry.
Read more about the advantages in Steeda Mustang Cold Air Intakes over the competitors on our blog: https://www.steedablog.com/2012/03/mustang-cold-air-intake-truth/
Product Benefits
Steeda's new Cold Air Kit for the S197 produces the greatest power gains of any Cold Air Kit on the market. Testing has shown increases of up to 38 HP and 30 ft lbs of Torque to the rear wheels with Steeda's Cold Air Kit combined with our Custom SCT Tune.
" SCT has seen the highest horsepower and torque results while using Steeda's Cold Air Kit, over any other brand. " - Chris Johnson, President of SCT Tuning
Steeda's lifetime filter can be cleaned and re-oiled, but the big news here is that we've streamlined the airflow in the S197 Mustang to the point that a computer re-flash isn't just an option, it's required! Check out the SCT X4 - the perfect tool for the job! Or check out our power pack featuring a package savings on our cold air/tuner combo!
The kit is supplied with a stainless steel air box with built-in velocity stack. It mounts in the factory location with the supplied rubber trim to seal it against the hood & fender to keep the hot air out. Our tests showed inlet temps a mere 5 degrees above ambient temperature. The Steeda Lifetime Filter can easily be cleaned and re-oiled, making maintenance a snap. All hardware required for installation is included in the kit.
Warning: Not approved for sale in California or states that require a California E.O. #. This part has been designed and is intended for off-road application only. Installation of this part on a vehicle that is driven on public roads may violate U.S. and Canadian laws and regulations
Note: Use of Steeda's Cold Air Intake REQUIRES a tune under if not used with our Steeda CAI Restrictor which requires NO TUNE
Independent test results have proven gains of over 4 HP and 5 ft/lbs of Torque over the entire RPM range of the so called 'leading brands'.
Used by the top tuners in the industry.
Read more about the advantages in Steeda Mustang Cold Air Intakes over the competitors on our blog: https://www.steedablog.com/2012/03/mustang-cold-air-intake-truth/
Product Benefits
Steeda has just developed an insert for our hugely popular 2005-2009 Mustang GT cold air kit. This insert allows you to run your factory tune and 87 octane fuel. No computer flash is required!! The best part is it still produces up to 10 hp and 10 ft/lbs of torque to the rear tires with 87 octane.
This is perfect for people who daily drive their Mustangs and would like an increase in power but not have to run premium gas regularly. Or for those that only want to run performance tunes at the track as the insert can be easily removed or installed.
Please Note: only compatible with 555-3120, 555-3131, 555-3131-B.
This part is not approved for sale in California or states that require a California E.O. # and is intended for off-road and competition use only. Installation of this part on a vehicle that is driven on public roads may violate U.S. laws and/or regulations. It is the responsibility of the customer to determine if their modified vehicle complies with applicable laws. For more information, please visit our Terms & Conditions page.
This billet 6061 aluminum insert allows you to run your factory tune and 87 octane fuel. No computer flash is required!! This is due to Steeda's exclusive velocity stack design and high flow air filter while maintaining all the factory cold air feeds.
The best part of both this kit is, once you want to upgrade to a Steeda performance tune you can! Simply remove the billed insert from the mass air meter and enjoy even more tire burning horse power and torque!!
Like all Steeda manufactured parts, this too features an exclusive life time warranty.
Warning: Not approved for sale in California or states that require a California E.O. #. This part has been designed and is intended for off-road application only. Installation of this part on a vehicle that is driven on public roads may violate U.S. and Canadian laws and regulations.
Note: Federal and several state and provincial laws prohibit the removal, modification or rendering inoperative of any part that affects emissions or safety on motor vehicles used on public streets or highways. Steeda Autosports assumes no liability for any violations arising out of any federal, state or provincial emissions or safety requirements on motor vehicles arising out of the customer's modifications and/or use of Steeda products. It is the responsibility of the customer to determine if their modified vehicle complies with applicable laws.
This limited warranty is the only express warranty applicable to Steeda Autosports products. Other rights may arise or vary from state to state in the United States. Steeda is not responsible for any time for which you may lose the use of your vehicle, any inconvenience you might be caused, the loss of your transportation or any part thereof, or any other incidental or consequential damages you may have.
Steeda's black silicone hose upgrade kit is designed for use with your existing 2005 through 2009 Steeda Cold Air Intake for the Mustang GT. The cold air intake kit originally came with blue silicone hosing. So, if you have one of the original kits, or want to upgrade an existing kit with blue hose, this kit is for you.
The multi-ply black silicone hosing is exceptionally durable and is built to last.
Easy to install with a simple screw driver by removing your cold air intake hose clamps.