Patent Pending

Bare Bones Oil Separator

Drilled for 3/8" NPT thread.  This is a bare bones kit so you can use your own fittings and hose to design the look you want! Keep HP robbing oil out of your intake with Bob's Auto Sports oil seperator. Developed to eliminate oil from entering your intake by engine blow-by, which channels oil contaminated air into your supercharger. A key problem caused by oil in the intake is that it reduces the octane of your fuel and causes detonation especially in turbo, supercharger and nitrous applications. Featuring a large chamber, and superior filtering media, this is the unit to have for road racers.  Draining the fluid is easy with a valve in the bottom.

Learn More

J&L Oil Separators Oil Separator 3.0 Passenger Side (2005-2010 Mustang) - 3013P-C

3oz Capacity
Solid billet construction
Quick connect PCV fittings
The multistage filter is designed to collect the finest of oil vapors and drop them into the removable bottom while allowing clean air to pass through to the intake.

During the process of venting crankcase pressure back through your intake track, large amounts of oil, in the form of vapors can gather/accumulate in your intake tube, intake manifold runners and even dilute your gas, lowering its octane level. This happens on all engines and is even worse with forced inducted vehicles (supercharged and turbocharged) as crankcase pressures are increased. To combat this, we have developed an oil separator of our own design. Milled from solid billet aluminum this is a rock-solid piece. It has a knurled tank base for easy removal to drain the spent oil and an O-ring seal to prevent any leaks.

Filtering consists of a fine mesh stainless steel screen that traps fine oil vapors and releases them once heavy enough to fall. They then pass through a 1/2" thick 1/16th" aluminum honeycomb filter where they grow every larger and then fall into the bottom. By the time the oil gets through the filter it's too heavy to be passed on into the intake. The tank holds 3 oz of fluid, while that may not sound like a lot, you shouldn’t see that much oil in your PCV system. Drain it every 2000-3000 miles and you will never come close to filling it.

Learn More

Steeda Oil Separator 79-04 Mustang - 555-3710

Steeda's oil separator kit reduces detonation, oil burning and deposits on the valves by removing oil drawn through the PCV system before it can contaminate the intake charge. Originally designed for the '03-'04 Cobras, this kit features a clear bowl and is designed for a 3/8" and 1/2" PCV system. Mounting bracket included.

Excess crankcase pressure (sometimes known as "blow-by") is vented from the crankcase through the PCV system, where it is drawn into the intake manifold and returned by the engine. This re circulated air contains aerated oil from the crankcase which is burned by the engine. Supercharged, nitrous-boosted and high mileage engines often draw excessive amounts of oil into the engine through the PCV system. The Steeda oil separator plugs into the PCV hose between the PCV valve and the intake manifold and removes aerated oil from the re circulated air and collects it in a tube that can be drained and recycled.

Oil separator kits include the oil separator and required hardware. For 04-earlier applications connecting hose is included.

Features
Originally designed for the 03/04 Cobra's, this kit features a clear bowl and is designed for a 3/8" and now a 1/2" PCV system. Mounting bracket included.

Fits any 3/8" and 1/2" PCV/vacuum system

Warning: Not approved for sale in California or states that require a California E.O. #. This part has been designed and is intended for off-road application only. Installation of this part on a vehicle that is driven on public roads may violate U.S. and Canadian laws and regulations.

Note: Federal and several state and provincial laws prohibit the removal, modification or rendering inoperative of any part that affects emissions or safety on motor vehicles used on public streets or highways. Steeda Autosports assumes no liability for any violations arising out of any federal, state or provincial emissions or safety requirements on motor vehicles arising out of the customer's modifications and/or use of Steeda products. It is the responsibility of the customer to determine if their modified vehicle complies with applicable laws.

This limited warranty is the only express warranty applicable to Steeda Autosports products. Other rights may arise or vary from state to state in the United States. Steeda is not responsible for any time for which you may lose the use of your vehicle, any inconvenience you might be caused, the loss of your transportation or any part thereof, or any other incidental or consequential damages you may have.

Product Benefits

• High-quality materials
• Extends life of your motor
• Simple to service
• Fits any 3/8" or 1/2" PCV/vacuum system

Learn More

Steeda Filter element for Steeda Oil Seperator - 555-3715

This replacement oil separator filter works with all Steeda oil separators. This filter is easy to install and will keep your oil separator working like new.

Product Benefits

• Easy to install
• Keep your oil separator working like new

Learn More

» Show Quality Finish » Can measures 6.00" x 2.75" » Easy 20-30 minute install » Vents oil vapor to a single tank » -8, -10 or -12 fitting available » Improves Fuel Economy & Performance » Comes with petcock for easy draining » High Quality CNC Machined Billet Aluminum » Available in Satin or Polished - Select Finish Above

Learn More