You have no items in your shopping cart.
Maximum Motorsports 1979-89 Mustang Caster Camber Plates provide the means to properly align your Mustang's front tires. Especially well-suited for lowered Mustangs because MM's innovative design provides a much wider range of adjustment for camber than the stock adjustment slots.
Better by designThe wider range of camber adjustment allows the reduction of excessive negative camber caused by lowering. That will improve tire wear of a street-driven Mustang. Camber may be adjusted to a much more negative setting for more front grip when cornering.
Caster AdjustmentMM Caster Camber Plates provide adjustment of caster, which is otherwise not adjustable. Increasing the amount of positive caster improves straight-line stability. Increasing the amount of caster also helps increase front grip during cornering because additional cater causes an increase in negative camber on the outside tire when the car is steered into a corner. The increased negative camber increases cornering grip. The increase in negative camber is only present while the tire is steered, and therefore does not harm tire wear.
ConstructionSteeda aimed this kit at all the Fox body, SN95 and New Edge Mustang guys out there. How many of you have lost the hardware to your camber plates? Look no further. Steeda now offers a full spacer kit for our camber plates. Note due to the amount of design borrowing that has gone on over the years this kit fits most other aftermarket kits as well. So if you have lost or damaged your spacers and bushings, or purchased a used set with them missing, you now have a solution!
Maximum Motorsports 1990-93 Mustang Caster Camber Plates provide the means to properly align your Mustang's front tires. Especially well-suited for lowered Mustangs because MM's innovative design provides a much wider range of adjustment for camber than the stock adjustment slots.
Better by designThe wider range of camber adjustment allows the reduction of excessive negative camber caused by lowering. That will improve tire wear of a street-driven Mustang. Camber may be adjusted to a much more negative setting for more front grip when cornering.
Caster AdjustmentMM Caster Camber Plates provide adjustment of caster, which is otherwise not adjustable. Increasing the amount of positive caster improves straight-line stability. Increasing the amount of caster also helps increase front grip during cornering because additional cater causes an increase in negative camber on the outside tire when the car is steered into a corner. The increased negative camber increases cornering grip. The increase in negative camber is only present while the tire is steered, and therefore does not harm tire wear.
ConstructionOut of stock
UPR Products releases their newest suspension product the Four Bolt Caster Camber Plates for the 1994-2004 Ford Mustang. These new plates add a fourth bolt for added strength for road race, drag race and street cars using front coil over kit suspensions. The black or silver zinc plated plates are machined for maximum adjustability. The bearing mounts are our one piece machined design and are fully adjustable. These new four bolt caster camber plates allow you complete control over your suspension geometry.
Geared to be one of the strongest caster camber plates out in the market today by using superior materials and being the only four bolt caster plate that is fully CNC machined.
Product FeaturesMaximum Motorsports 1979-89 Mustang Caster Camber Plates provide the means to properly align your Mustang's front tires. Especially well-suited for lowered Mustangs because MM's innovative design provides a much wider range of adjustment for camber than the stock adjustment slots.
Better by designThe wider range of camber adjustment allows the reduction of excessive negative camber caused by lowering. That will improve tire wear of a street-driven Mustang. Camber may be adjusted to a much more negative setting for more front grip when cornering.
Caster AdjustmentMM Caster Camber Plates provide adjustment of caster, which is otherwise not adjustable. Increasing the amount of positive caster improves straight-line stability. Increasing the amount of caster also helps increase front grip during cornering because additional cater causes an increase in negative camber on the outside tire when the car is steered into a corner. The increased negative camber increases cornering grip. The increase in negative camber is only present while the tire is steered, and therefore does not harm tire wear.
ConstructionThese BBK Clear Anodized Billet Aluminum Caster Camber Plates Are Designed To Help Improve Your 1979-1993 Mustangs Handling By Improving The Front End Alignment.
By Installing A Set Of These BBK Performance Gripp Caster Camber Plates You Will Be Able To Set And Adjust The Caster And Camber Independently Of Each Other To Obtain The Best Geometry Set Up For Your Mustang suspension.
These Caster Camber Plates Are Highly Recommended When Installing A Set Of Lowering Springs On Any Ford Mustang.
Lowering Your Mustang Will Cause The Top Of The Front Tires To Lean In Towards The Center Of The Car (Increased Negative Camber), Resulting In Uneven Tire Wear
This Excessive Negative Camber Can Be Easily Corrected With These BBK / Gripp Caster Camber Plates, Allowing Alignment To Factory Or Performance Handling Specifications.
Some Mustang Enthusiasts Consider Handling Performance More Important Than Horsepower And Torque.
These Mustang Caster Camber Plates Will Considerably Improve The Way Your Car Will Turn Into Corners Flatter And Be Considerably More Responsive To Steering Input Overall.
They Will Turn Your Car Into A Real Corner Carver.
Note: BBK / Gripp Caster Camber Kits Are Designed For The Original Macpherson Style Struts. They Are Not Designed To Be Used With Coil Over Kits.
Learn MoreUPR announces the additions in their performance line of 90-93 Mustang Steel Caster Camber Plates. Our caster camber plates replace the stock flexible rubber strut mount bushings allowing you the ultimate control of the suspension geometry. Priced as an affordable option to our Billet Caster Camber plates while retaining a high quality product.
Features Tig welded construction, Teflon lined bearing, Stainless steel bushings spacers and is Zinc plated for a durable yet clean finish.
Product Features