• When we set out to design our new rear bumper we contemplated how we could make a bumper that is both attractive and yet functional. We are convinced we’ve nailed the right formula for a perfect balance. For maximum clearance and improved aesthetics, we integrated the trailer hitch 4.5” higher than the stock location.
  Note:
  • For optimal appearance, rear dove tailing of the bed is recommended
  • This bumper will only fit 2015 Up F150s and Gen 2 Raptors
  • Additional winch is available to add to the bumper if desired
  • For Custom light cutouts Please Call

Learn More

2015 Up F150Tommy Gun Front Bumper Maximum approach angle Curves tightly against the factory valence Optional Bolt-on black valence add $350 Optional removable push bar add $350 Price as shown $1995 Requires frame to be cut and our aftermarket intercooler kit Mounting Hardware: 3/4″ x 6″ Grade 8 Lower mounts to the factory frame Retains factory skid plate under the engine Please note that this bumper is built to order.Learn More

RPG Off-Road Prerunner Front Bumper (2015-2020 Ford F-150)Learn More

ICI 35lb shell, reinforced 3/16 inch 5052 Aluminum plating - steel brackets - AL-RBM85FDN

REAR BUMPER BUILT WITH REINFORCED 3/16 INCH 5052 ALUMINUM PLATING
WILL NOT RUST
BUMPER SHELL WEIGHS LESS THAN 50LBS
WITH LICENSE PLATE LIGHT AND BRACKET
WITH OR WITHOUT PARKING SENSORS
SINGLE FLUSH MOUNT LED HOLES
WORKS WITH FACTORY HITCH

Works with or without factory parking sensors as direct fit - two flush mount LED light locations - License plate bracket and LED included - all hardware and brackets included - body modification not required

ICI?s Alumilite Series offers the Next generation of Aftermarket Truck Bumpers that last longer, plays harder, performs better for your truck. Built with reinforced 5052 3/16? Aluminum, comparable in strength to steel but weighs less than 40 lbs and will not rust. Accommodates all OE factory parking sensors out of the box, direct fit. Primed, eco-dipped, and powder coated black. Accepts two flush mount LED lights. License plate bracket and LED included. Pre-cut trailer plug hole and spare tire access. Works with factory hitch receiver. Limited Life Time structural warranty. Steel brackets and all hardware included.

ICI has been a recognized name in the aftermarket automotive industry for the last 30 years. ICI began with First to Market products such as Stainless Steel Rocker Panels, Form Fit Bed Caps, Car and Truck Fender Trim, the 1st Stainless Steel High Polished Nerf Bar, 4" TIG Welded Stainless End caps for Oval Step Bars which includes our revolutionary Form Fit Step Pads on all of our step bar lines. ICI’s corporate, production and warehousing facilities are located in sunny Phoenix, Arizona. ICI has also incorporated our global manufacturing partners to help supplement our manufacturing capabilities. This keeps us on the leading edge of manufacturing technology and gives us the ability to maintain a competitive edge while ensuring higher order fulfillment rates. All of this results in the best products at very competitive prices!

Learn More

ICI 45lb shell, reinforced 3/16 inch 5052 Aluminum plating - steel brackets - AL-FBM15FDN-RT

ALUMINUM FRONT NON-WINCH BUMPER BUILT WITH REINFORCED 3/16 INCH 5052 ALUMINUM PLATING
WILL NOT RUST
BUMPER SHELL WEIGHS LESS THAN 50LBS
WITH OPTIONAL BOLT-ON RT SERIES LIGHT BRACKET
FITS W/ OR W/O PARKING SENSORS
DOUBLE 3.5 SQUARE OR SINGLE 3.5 SQUARE LIGHT HOLES
W/ ACC &
INTERGRADED TURN SIGNALS LIGHTS
RETAINS FACTORY TOW HOOKS

W/ Adaptive Cruise Control - direct fit - reuse factory tow hooks - four 3'' LED cube light brackets - internal/external light bar brackets - all hardware and brackets included - body modification not required

ICI?s Alumilite Series offers the Next generation of Aftermarket Truck Bumpers that last longer, plays harder, performs better for your truck. Built with reinforced 5052 3/16? Aluminum, comparable in strength to steel but weighs less than 50 lbs and will not rust. Accommodates all OE factory parking sensors out of the box including Adaptive Cruise Control, direct fit. Primed, eco-dipped, and powder coated black. Internal and external LED lightbar options with removable RT light mount plus multiple LED cube bracket locations. Reuses factory tow hooks. Limited Life Time structural warranty. Steel brackets and all hardware included.

ICI has been a recognized name in the aftermarket automotive industry for the last 30 years. ICI began with First to Market products such as Stainless Steel Rocker Panels, Form Fit Bed Caps, Car and Truck Fender Trim, the 1st Stainless Steel High Polished Nerf Bar, 4" TIG Welded Stainless End caps for Oval Step Bars which includes our revolutionary Form Fit Step Pads on all of our step bar lines. ICI’s corporate, production and warehousing facilities are located in sunny Phoenix, Arizona. ICI has also incorporated our global manufacturing partners to help supplement our manufacturing capabilities. This keeps us on the leading edge of manufacturing technology and gives us the ability to maintain a competitive edge while ensuring higher order fulfillment rates. All of this results in the best products at very competitive prices!

Learn More

DV8 Offroad Truck Front Full Size Bumper (2018-2021 F-150) - FBFF1-08

18+ Ford F-150 Truck Front Full Size Bumper

FBFF1-08 2018 to present Ford F-150 Front Bumper. The DV8 Offroad FBFF1-08 front bumper is designed to provide exceptional protection at a fraction of the weight of ordinary steel bumpers. Although these bumpers are made with 3/16 inch steel and 1/4 inch reinforcements throughout, DV8 shaves every pound possible off the bumper with strategic cutouts and mesh aluminum grills that can be removed and color matched to the vehicle. DV8 also integrates 2 LED light holes into the bumper for improved visibility. This bumper has 2 shackle recovery points and is designed to accommodate up to a 12,500 lbs. winch. The 3 piece design allows for easy replacement if one of the pieces is damaged in an accident and also provides the opportunity to swap out the end pieces for a different style i.e. Baja, plate, high clearance etc. DV8 Offroad did not sacrifice style or functionality when making these bumpers modular. Every bumper uses razor thin adjoining edges to keep the full-size bumper look and brackets that extend from the bumper ends to the frame where necessary to provide excellent strength and rigidity. This bumper comes powder coated in a sand texture black finish. This finish can be left as is or can be sanded down and painted over to color match the bumper to the vehicle. Key Features: Lighter than ordinary steel bumpers, Every bit as rigid as a one piece bumper, Cut outs for 2 LED Pod Lights (DV8 p/n B3CE16W4W), Accommodates up to 12,500 lbs. winch, 2 Shackle recovery points, Modular design allows for customization, Sand texture powder coat finish, Mesh inserts can be color keyed to vehicle, Lights Not Included.

We at DV8 Off-Road understand Jeeps. The importance of creating a product that stands the test of time on and off the trail. We build durable, long lasting parts that compliment the natural lines of a Jeep. We also understand that along with style, Jeep enthusiasts need functional, reliable equipment that also protects their investment. That's why we test all of our products on our fleet of JK and JL Jeeps before releasing them to the public. These vehicles are driven both on and off-road daily. Our staff enjoys taking the DV8 Jeeps out and testing our products to the limit. We do all of this to ensure that we are providing high quality accessories that are just as amazing as the Jeep itself.

Learn More