It is a proven scientific fact that cold air is denser than hot air, which means that an engine breathing cold air is going to make more power than the identical engine breathing hot air. The quest for cold air is what drives the AIRAID® Cold Air Dam Intakes. The CAD Intakes retain the stock filter location but give the stock intake system a big boost with the addition of a huge air inlet that provides a steady, free-flowing supply of cold air. This is done via Cold Air Dam panels, which mount in the factory air box location and utilize any factory cold air inlet ducts that are present, while adding additional cold air passages to the filter. These panels also keep the filter isolated from the hot engine compartment air by sealing to the underside of the hood via blade-style weatherstripping. Each AIRAID® Cold Air Dam Intake is designed specifically for each vehicle application and offers a simple, trouble-free installation using simple hand tools. Like the rest of the AIRAID® systems, the CAD Intakes are Made in the USA and include all the necessaryLearn More

It is a proven scientific fact that cold air is denser than hot air, which means that an engine breathing cold air is going to make more power than the identical engine breathing hot air. The quest for cold air is what drives the AIRAID® Cold Air Dam Intakes. The CAD Intakes retain the stock filter location but give the stock intake system a big boost with the addition of a huge air inlet that provides a steady, free-flowing supply of cold air. This is done via Cold Air Dam panels, which mount in the factory air box location and utilize any factory cold air inlet ducts that are present, while adding additional cold air passages to the filter. These panels also keep the filter isolated from the hot engine compartment air by sealing to the underside of the hood via blade-style weatherstripping. Each AIRAID® Cold Air Dam Intake is designed specifically for each vehicle application and offers a simple, trouble-free installation using simple hand tools. Like the rest of the AIRAID® systems, the CAD Intakes are Made in the USA and include all the necessaryLearn More

Does not fit 2011 Ford F-150 3.5L EcoBoost trucks due to MAF Sensor change

Learn More

It is a proven scientific fact that cold air is denser than hot air, which means that an engine breathing cold air is going to make more power than the identical engine breathing hot air. The quest for cold air is what drives the AIRAID® Cold Air Dam Intakes. The CAD Intakes retain the stock filter location but give the stock intake system a big boost with the addition of a huge air inlet that provides a steady, free-flowing supply of cold air. This is done via Cold Air Dam panels, which mount in the factory air box location and utilize any factory cold air inlet ducts that are present, while adding additional cold air passages to the filter. These panels also keep the filter isolated from the hot engine compartment air by sealing to the underside of the hood via blade-style weatherstripping. Each AIRAID® Cold Air Dam Intake is designed specifically for each vehicle application and offers a simple, trouble-free installation using simple hand tools. Like the rest of the AIRAID® systems, the CAD Intakes are Made in the USA and include all the necessaryLearn More

It is a proven scientific fact that cold air is denser than hot air, which means that an engine breathing cold air is going to make more power than the identical engine breathing hot air. The quest for cold air is what drives the AIRAID® Cold Air Dam Intakes. The CAD Intakes retain the stock filter location but give the stock intake system a big boost with the addition of a huge air inlet that provides a steady, free-flowing supply of cold air. This is done via Cold Air Dam panels, which mount in the factory air box location and utilize any factory cold air inlet ducts that are present, while adding additional cold air passages to the filter. These panels also keep the filter isolated from the hot engine compartment air by sealing to the underside of the hood via blade-style weatherstripping. Each AIRAID® Cold Air Dam Intake is designed specifically for each vehicle application and offers a simple, trouble-free installation using simple hand tools. Like the rest of the AIRAID® systems, the CAD Intakes are Made in the USA and include all the necessaryLearn More

aFe's Stage-2 air intake system produces an astonishing 32 horsepower and 35lbs. x ft. torque and outflows the factory intake by 44%! This intake is the most sophisticated design on the market today. Our equal length dual tube design with H-pipe balance-tube increases intake air flow and velocity while increasing horsepower and improving throttle response. Allowing for quicker turbo spooling. The air intake is enclosed in a durable 16-gauge heat shield that utilizes the lower half of the factory air box that requires no assembly. Two 360 degree conical Pro DRY S air filters provide protection and flow for maximum performance and are constructed with 100% polyurethane for long life and multiple cleaning cycles.

Equal Length Intake Tube - This intake uses a dual intake tube design with an H-Pipe balance tube to balance intake tube pressures and maximize air flow and velocity.

Dual 360 Degree Air Filters- This intake utilizes dual oval conical Pro Dry S performance air filters for maximum flow. This 3-layer progressive, non-oiled synthetic air filter requires no oils for cleaning for maximum convenience.

Top Mounted Heat Shield Design- aFe developed this heat shield to snap onto the top of the lower half of the factory air box to provide a hassle-free installation utilizing factory mounting locations.

Patent Pending

Note: This intake fits the 2011 model only.

This intake is 50-state legal (CARB E.O Number D-550-15).Learn More

aFe's Stage-2 air intake system produces an astonishing 32 horsepower and 35lbs. x ft. torque and outflows the factory intake by 44%! This intake is the most sophisticated design on the market today. Our equal length dual tube design with H-pipe balance-tube increases intake air flow and velocity while increasing horsepower and improving throttle response. Allowing for quicker turbo spooling. The air intake is enclosed in a durable 16-gauge heat shield that utilizes the lower half of the factory air box that requires no assembly. Two 360 degree conical Pro DRY S air filters provide protection and flow for maximum performance and are constructed with 100% polyurethane for long life and multiple cleaning cycles.

Equal Length Intake Tube - This intake uses a dual intake tube design with an H-Pipe balance tube to balance intake tube pressures and maximize air flow and velocity.

Dual 360 Degree Air Filters- This intake utilizes dual oval conical Pro Dry S performance air filters for maximum flow. This 3-layer progressive, non-oiled synthetic air filter requires no oils for cleaning for maximum convenience.

Top Mounted Heat Shield Design- aFe developed this heat shield to snap onto the top of the lower half of the factory air box to provide a hassle-free installation utilizing factory mounting locations.

Patent Pending

Note: This intake fits the 2012-Current models only. It does not fit the 2011.

This intake is 50-state legal (CARB E.O Number D-550-15).Learn More

aFe's Stage-2 air intake system produces an astonishing 32 horsepower and 35lbs. x ft. torque and outflows the factory intake by 44%! This intake is the most sophisticated design on the market today. Our equal length dual tube design with H-pipe balance-tube increases intake air flow and velocity while increasing horsepower and improving throttle response. Allowing for quicker turbo spooling. The air intake is enclosed in a durable 16-gauge heat shield that utilizes the lower half of the factory air box that requires no assembly. Two 360 degree conical Pro 5R air filters provide protection and flow for maximum performance and are constructed with 100% polyurethane for long life and multiple cleaning cycles.

Equal Length Intake Tube - This intake uses a dual intake tube design with an H-Pipe balance tube to balance intake tube pressures and maximize air flow and velocity.

Dual 360 Degree Air Filters- This intake utilizes dual oval conical Pro 5R performance air filters for maximum flow. This 5-layer progressive, oiled cotton gauze air filter provides maximum flow for increased horsepower and torque.

Top Mounted Heat Shield Design- aFe developed this heat shield to snap onto the top of the lower half of the factory air box to provide a hassle-free installation utilizing factory mounting locations.

Patent Pending

Note: This intake fits the 2011 models only.

This intake is 50-state legal (CARB E.O Number D-550-15).Learn More