Cold Air Intakes

Airaid Performance Air Intake System (2015-2020 F-150 3.5L & 2.7L) - 405-338

$499.99

| Add to Compare

Airaid Performance Air Intake System (2015-2020 F-150) - 405-338

The AIRAID MXP Air Intake System represents the ultimate in AIRAID's cold air induction systems and delivers higher levels of horsepower and acceleration gains for high-performance gas and diesel vehicles. Some AIRAID MXP Air Intakes start with a replacement one-piece roto-molded air box that addresses the shortcomings of the restrictive factory design. Housed inside the air box is an AIRAID premium air filter for outstanding air flow and filtration. Air is directed through a new air intake tube constructed of cross-linked, high-density polyethylene that is designed using extensive computer modeling to maintain proper mass air flow readings and calibration. Many MXP Air Intake Systems have a built-in velocity stack, which further promotes airflow. What this all means is that you get a simple-to-install, yet extremely sophisticated system to increase air flow while maintaining proper air-to-fuel ratios, thereby eliminating the need for recalibration after installation. Just bolt it on and go! Some AIRAID air intakes are not legal for sale or use in California and other states adopting California emission standards, while others are 50 state legal. View the product's vehicle applications to determine the legal status for each vehicle.

Learn More

Airaid Performance Air Intake System (2015-2020 F-150 3.5L & 2.7L) - 404-338

$499.99

| Add to Compare

Airaid Performance Air Intake System (2015-2020 F-150) - 404-338

The AIRAID MXP Air Intake System represents the ultimate in AIRAID's cold air induction systems and delivers higher levels of horsepower and acceleration gains for high-performance gas and diesel vehicles. Some AIRAID MXP Air Intakes start with a replacement one-piece roto-molded air box that addresses the shortcomings of the restrictive factory design. Housed inside the air box is an AIRAID premium air filter for outstanding air flow and filtration. Air is directed through a new air intake tube constructed of cross-linked, high-density polyethylene that is designed using extensive computer modeling to maintain proper mass air flow readings and calibration. Many MXP Air Intake Systems have a built-in velocity stack, which further promotes airflow. What this all means is that you get a simple-to-install, yet extremely sophisticated system to increase air flow while maintaining proper air-to-fuel ratios, thereby eliminating the need for recalibration after installation. Just bolt it on and go! Some AIRAID air intakes are not legal for sale or use in California and other states adopting California emission standards, while others are 50 state legal. View the product's vehicle applications to determine the legal status for each vehicle.

Learn More

Cobb Intake System w/ HCT (2017-2020 F-150 EcoBoost Raptor / Limited / 3.5L) - 7F2125

$450.00

| Add to Compare

Cobb Ford Turbo Inlet Tubes F-150 Ecoboost 3.5L 2017-2020 / Raptor 2017-2020 - 7F2125

Learn More

AFE Magnum FORCE Stage-2 Dual 3 IN Cold Air Intake System w/Pro 5R Filter (Ford F-150 15-21 V6-2.7L / 15-16 V6-3.5L TT) - 54-22642-B

$470.00

| Add to Compare

DETAILS:
900CFM Rating @ 7" Hâ‚‚O
+5 HP and +6 lbs. x ft. Torque max gains
Outflows factory intake by 71%
3" mandrel-bent, wrinkle-black powder-coated aluminum intake tubes for balanced intake tube pressures and maximize airflow and velocity
Powder-Coated One Piece 18 Gauge Steel Housing utilizes stock mounting locations
Includes Dual Pro 5R pre-oiled air filters
No Cutting or Drilling on Factory Parts for Faster Installation

Dual Large 5-Layer Performance Air Filters:
This sealed intake system utilizes pre-oiled, large 7" tall radial flow performance air filters with 5-layers of progressive finer mesh cotton media providing maximum airflow and performance.

Top Mounted Heat Shield Design:
aFe developed this sturdy 18 gauge steel wrinkle-black powder-coated heat shield to snap onto the top of the lower half of the factory airbox to provide a hassle-free installation utilizing factory mounting locations.

Large Dual 3" Intake Tubes:
Dual Mandrel-bent Wrinkle-black Powder-coated aluminum intake tubes are designed with an H-pipe to balance intake tubes.

Hassle-Free Installation:
All clamps, couplings, and hardware are included for hassle-free installation. This is a direct bolt-on kit that requires no cutting or drilling on factory parts.

Note:
This product is not currently CARB exempt and is not available for sale in California or for use on any vehicle registered with the California Department of Motor Vehicle.

VEHICLE APPLICATIONS
2015-2021 Ford F-150 EcoBoost V6 2.7L (tt) Gas
2015-2016 Ford F-150 EcoBoost V6 3.5L (tt) Gas
Learn More

AFE Momentum GT Cold Air Intake System w/ Pro 5R Filter (Ford F-150 15-21 V6-2.7L / 15-16 V6-3.5L TT) - 54-73112-1

$416.00

| Add to Compare

DETAILS:
Dyno-Proven Gains up to +16 HP & +17 Lbs. x Ft. Torque
Outflows Factory Intake by up to 66%
CAD-Designed Roto-Molded Intake Tube
One-Piece Sealed Housing
Pro 5R Oiled 5-Layer Progressively Finer Mesh Cotton Gauze Oiled Media for Maximum Performance
Built-In Sight Window Provides Easy Inspection of Filter Without Disassembly
Unique (Patent Pending) Filter-to-Housing Interface for Easy Installation
No Cutting or Drilling on Factory Parts for Faster Installation

Unique One-Piece Housing:
The smooth one-piece sealed housing is used to eliminate the use of multiple-piece housings and ensure the coolest air intake charge available. A large, clear sight window is used for a hassle-free filter inspection and an aggressive style.

Roto-Molded Tube:
This System uses a CAD designed, dyno-tuned, roto-molded intake tube to achieve maximum power gains while maintaining a perfect fit.

Huge 5 Layer Performance Air Filter:
The Momentum GT intake is designed around a pre-oiled, large 9" tall conical inverted top 360-degree radial flow performance air filter with five layers of progressive finer mesh cotton media providing maximum airflow and performance. The unique air filter-to-housing interface (patent pending) allows for maximum filter size which increases the available air volume while simplifying the installation process.

Premium Hardware:
A premium stainless steel T-bolt clamp and silicone couplings are used for strength and durability while also providing the most secure installation available. Momentum GT intakes are designed with fewer parts for a quick and simple installation.

Emissions Disclaimer:
Some or all of the applications listed are 50-state exempt, please see CARB EO# D-550-28 for details.

VEHICLE APPLICATIONS
2015-2021 Ford F-150 EcoBoost V6 2.7L (tt) Gas
2015-2016 Ford F-150 EcoBoost V6 3.5L (tt) Gas
Learn More

AFE Magnum FORCE Stage-2 Cold Air Intake System w/ Pro DRY S Filter (Ford F-150 15-21 V6-2.7L / 15-16 V6-3.5L TT) - 51-22642-B

$470.00

| Add to Compare

DETAILS:
900CFM Rating @ 7" H2O
+5 HP and +6 lbs. x ft. TQ max gains
Outflows factory intake by 44%
3" Mandrel-Bent, Wrinkle-Black Powder-Coated Aluminum Intake Tubes for Balanced Intake Tube Pressures and Maximum Airflow and Velocity
Powder-Coated One-Piece 18-Gauge Steel Housing Utilizes Stock Mounting Locations
Includes Dual Pro DRY S Oil-Free 3-Layer Synthetic Media for Maximum Convenience With Excellent Filtration Efficiency
No Cutting or Drilling on Factory Parts for Faster Installation

Dual Large 3-Layer "Oil-Free" Performance Air Filters:
This intake system utilizes oil-free, large 7" tall radial flow performance air filters with 3-layer synthetic media for maximum convenience.

Top Mounted Heat Shield Design:
aFe developed this sturdy 18 gauge steel wrinkle-black powder-coated heat shield to snap onto the top of the lower half of the factory airbox to provide a hassle-free installation utilizing factory mounting locations.

Large Dual 3" Intake Tubes:
Dual Mandrel-bent wrinkle-black powder-coated aluminum intake tubes are designed with an H-pipe to balance intake tubes.

Hassle-Free Installation:
All clamps, couplings, and hardware are included for hassle-free installation. This is a direct bolt-on kit that requires no cutting or drilling on factory parts.

Note:
This product is not currently CARB exempt and is not available for sale in California or for use on any vehicle registered with the California Department of Motor Vehicles.

VEHICLE APPLICATIONS
2015-2021 Ford F-150 EcoBoost V6 2.7L (tt) Gas
2015-2016 Ford F-150 EcoBoost V6 3.5L (tt) Gas
Learn More

Corsa 619735-D Shielded Box Air Intake System - Red Filter (2017-2019 3.5L Ecoboost F150 / Raptor )

$403.99

| Add to Compare

All Corsa exhaust systems are constructed from premium stainless steel to deliver lasting performance, sound and appearance.

Features & Benefits
• Easy bolt-on installation. No welding needed. All hardware and detailed instructions are included in each kit.
• Corsa branded exhaust systems are backed by a Limited Lifetime Warranty for as long as you own your vehicle with proof of purchase.
• Proudly Designed, Engineered & Manufactured in Berea, OH
• +5 Horsepower
• +4 Torque
• +30% Flow Increase

Note: Every Corsa exhaust system is engineered and designed to match the unique properties of the vehicle it is designed for to deliver perfect fitment and performance. Corsa does not recommend or recognize purchases and installation on unspecified vehicles.

Applications
• 2017-2019 Ford F-150 / Raptor EcoBoost, 3.5L T
Learn More

AFE Magnum FORCE Stage-2ST Cold Air Intake w/ Pro 5R Media (2017-2021 Expedition, F-150, F-150) - 54-22972-B

$470.00

| Add to Compare

DETAILS:

900CFM Rating @ 7" H₂O
Outflows factory intake by 71%
3" mandrel-bent, wrinkle-black powder-coated aluminum intake tubes for balanced intake tube pressures and maximize airflow and velocity
Aluminum black powder-coated one piece heat shield utilizes stock mounting locations
Includes Dual Pro 5R pre-oiled air filters
No Cutting or Drilling on Factory Parts for Faster Installation
Learn More

AFE Momentum GT Cold Air Intake System w/ Pro DRY S Filter (Ford F-150 15-21 V6-2.7L / 15-16 V6-3.5L TT) - 51-73112-1

$416.00

| Add to Compare

DETAILS:
Dyno-Proven Gains up to +16 HP / +17 Lbs. x Ft. Torque
Outflows Factory Intake by up to 66%
CAD-Designed Roto-Molded Intake Tube
One-Piece Sealed Housing
Pro DRY S Oil-Free 3-Layer Progressively Finer Porosity Synthetic Media for Maximum Convenience
Built-In Sight Window Provides Easy Inspection of Filter Without Disassembly
Unique (Patent Pending) Filter-to-Housing Interface for Easy Installation
No Cutting or Drilling on Factory Parts for Faster Installation

Unique One-Piece Housing:
The smooth one-piece sealed housing is used to eliminate the use of multiple-piece housings and ensure the coolest air intake charge available. A large, clear sight window is used for a hassle-free filter inspection and an aggressive style.

Roto-Molded Tube:
This System uses a CAD designed, dyno-tuned, roto-molded intake tube to achieve maximum power gains while maintaining a perfect fit.

Huge Three Layer Performance Air Filter:
The Momentum GT intake is designed around an oil-free, large 9" tall conical inverted top 360-degree radial flow performance air filter with three layers of progressive finer porosity synthetic media providing maximum convenience. The unique air filter-to-housing interface (patent pending) allows for maximum filter size which increases the available air volume while simplifying the installation process.

Premium Hardware:
A premium stainless steel T-bolt clamp and silicone couplings are used for strength and durability while also providing the most secure installation available. Momentum GT intakes are designed with fewer parts for a quick and simple installation.

Emissions Disclaimer:
Some or all of the applications listed are 50-state exempt, please see CARB EO# D-550-28 for details.

VEHICLE APPLICATIONS
2015-2021 Ford F-150 EcoBoost V6 2.7L (tt) Gas
2015-2016 Ford F-150 EcoBoost V6 3.5L (tt) Gas
Learn More

video title