Inlet/Intercooler Tubes

aFe Blade Runner 2 1/2" Intercooler Tubes - Hot Side (2017-2020 F-150 & Raptor 3.5L Ecoboost) - 46-20298-B

$518.00

| Add to Compare

Improve Air Flow To The Turbos: These turbo inlets are the perfect addition to any aFe POWER air intake. They remove the air flow restriction of the factory turbo inlets and guarantee maximum air flow to the turbos for maximum power. They provide a smooth transition for the air from the air intake system to the turbos with minimum restriction. Computer Designed Inlet Tubes: This system is precisely designed on CAD software for perfect fitment and maximize the air flow path to the turbos. The tubes are constructed of high-quality cross-linked polyethylene (XLPE) to resist heat and impact. Stainless steel rings are pressed in the tube ends to protect the tubes from collapsing under pressure and heat. Reinforced Silicone Couplings: Silicone couplings are reinforced with three layers of polyester, offering heat resistance and excellent protection against wear and deterioration, and mate directly to the turbos. Stainless steel clamps are also provided to guarantee perfect seal years after years. Extensive testing: aFe POWER engineers spent countless hours and created multiple 3D printed prototypes to guarantee perfect fitment while producing maximum power. Each iteration has been tested on our in-house dyno alongside extensive road testing both on the street and off-road, to make certain these turbo inlet tubes will perform in any situation. Hassle-Free Installation: This kit comes with all necessary fittings pre-installed on the tubes for a fast and easy installation. All factory connections are maintained to ensure your truck runs perfectly. Fitment Note: These turbo inlets works perfectly with all aFe POWER air intake systems as well as the factory air intake system. Emission Note: This part is not CARB exempt at this time and is not legal for sale in California or use on vehicles registered with the California Department of Motor Vehicles.Learn More

aFe Power TiP Turbo Inlet Pipes (2017-2020 F-150 & Raptor 3.5L Ecoboost) - 59-20003

$391.00

| Add to Compare

Improve Air Flow To The Turbos: These turbo inlets are the perfect addition to any aFe POWER air intake. They remove the air flow restriction of the factory turbo inlets and guarantee maximum air flow to the turbos for maximum power. They provide a smooth transition for the air from the air intake system to the turbos with minimum restriction. Computer Designed Inlet Tubes: This system is precisely designed on CAD software for perfect fitment and maximize the air flow path to the turbos. The tubes are constructed of high-quality cross-linked polyethylene (XLPE) to resist heat and impact. Stainless steel rings are pressed in the tube ends to protect the tubes from collapsing under pressure and heat. Reinforced Silicone Couplings: Silicone couplings are reinforced with three layers of polyester, offering heat resistance and excellent protection against wear and deterioration, and mate directly to the turbos. Stainless steel clamps are also provided to guarantee perfect seal years after years. Extensive testing: aFe POWER engineers spent countless hours and created multiple 3D printed prototypes to guarantee perfect fitment while producing maximum power. Each iteration has been tested on our in-house dyno alongside extensive road testing both on the street and off-road, to make certain these turbo inlet tubes will perform in any situation. Hassle-Free Installation: This kit comes with all necessary fittings pre-installed on the tubes for a fast and easy installation. All factory connections are maintained to ensure your truck runs perfectly. Fitment Note: These turbo inlets works perfectly with all aFe POWER air intake systems as well as the factory air intake system. Emission Note: This part is not CARB exempt at this time and is not legal for sale in California or use on vehicles registered with the California Department of Motor Vehicles.Learn More

AMS Performance Turbo Inlet Tube Couplers (2017-2020 F-150 / Raptor 3.5L EcoBoost) - 32.08.0002-1

$48.45

| Add to Compare

With more F150 and Raptor owners adding upgraded turbos to their trucks, we knew we had to design a way to allow for our AMS Turbo Inlet Tubes to fit with the larger Garrett PowerMax turbos. With a 64.5mm inner diameter, the AMS 2017-2020 Raptor & F150 3.5L Ecoboost Turbo Inlet Tube Couplers create a smooth transition from the larger 2.75" compressor inlets of the Garrett PMax. These are the perfect match to allow for more air into your new PMax turbos!

Direct Fit for AMS Inlet Tubes and Garrett PowerMax Turbos
64.5mm ID and Wire Reinforced for Structural Integrity
Smooth Internal Transition Between Compressor Inlets and Silicone Tubing
Turbo Inlet Tubes and Garrett PMax Turbos Available Separately Learn More

CV Fab CVF Aluminum Intercooler Hot-side + Cold-side Piping Kit (2017-2020 Ford F-150 3.5L/Raptor EcoBoost) - 100AIC-9

$379.99

| Add to Compare

CV Fab CVF Aluminum Intercooler Hot-side + Cold-side Piping Kit (2017-2020 Ford F-150 3.5L/Raptor EcoBoost) - 100AIC-9

Direct bolt-on replacement Outflows OEM pipe by 17% (cold side) and 13% (hot side) Includes 1/8" NPT bung for meth injection (cold side) Made from 3.5" to 3" (cold side) and 2.5" (hot side) aluminum in wrinkle black finish Mandrel-bent aluminum construction features significantly improved thermal capacity and 1/3 of the weight when compared to stainless steel alternatives Includes heavy-duty t-bolt clamps and ultra-resistant 4-ply couplers Designed for use with all aftermarket or stock intercoolers CVF Lifetime Warranty

IMPROVES PERFORMANCE

The Aluminum Intercooler Hot-side + Cold-side Piping Kit is designed to improve the performance of your EcoBoost F-150's turbos by improving the performance of your intercooler via an increase in airflow over the OEM alternative. This kit replaces the weak stock rubber hot-side and the restrictive cold-side piping with mandrel-bent aluminum tubing for smoother airflow.

QUALITY CONSTRUCTION

The 3.5" to 3" cold-side and 2.5" hot-side pipes features mandrel bends to allow for smooth air flow and the ultra-resistance fibers on the silicone couplers offer enhanced tolerance against heat and pressure.

STRAIGHTFORWARD INSTALLATION

Designed to install easily with basic hand tools, the Piping Kit requires no extra modifications and should only take you about 90 minutes to swap out. Complete with all necessary t-bolt clamps and ultra-resistant couplers, this kit allows for a quick install.

APPLICATION

This product is designed to fit 2017-2020 Ford F-150 3.5L and Raptor EcoBoost models.

Learn More

CV Fab CVF Cold-side Aluminum Intercooler Piping (2017-2020 Ford F-150 3.5L/Raptor EcoBoost) - 100AIC-7

$199.99

| Add to Compare

CV Fab CVF Cold-side Aluminum Intercooler Piping (2017-2020 Ford F-150 3.5L/Raptor EcoBoost) - 100AIC-7

Direct bolt-on replacement Outflows OEM pipe by 17% Includes 1/8" NPT bung for meth injection Made from 3.5" to 3" aluminum in wrinkle black finish Mandrel-bent aluminum construction features significantly improved thermal capacity and 1/3 of the weight when compared to stainless steel alternatives Includes heavy-duty t-bolt clamps and ultra-resistant 4-ply couplers Designed for use with all aftermarket or stock intercoolers CVF Lifetime Warranty

IMPROVES PERFORMANCE

The Cold-side Aluminum Intercooler Piping is designed to improve the performance of your EcoBoost F-150's turbos by improving the performance of your intercooler via an increase in airflow over the OEM alternative. This kit replaces the weak stock rubber hot-side and the restrictive cold-side piping with mandrel-bent aluminum tubing for smoother airflow.

QUALITY CONSTRUCTION

The 3.5" to 3" cold-side pipe features mandrel bends to allow for smooth air flow and the ultra-resistance fibers on the silicone couplers offer enhanced tolerance against heat and pressure.

STRAIGHTFORWARD INSTALLATION

Designed to install easily with basic hand tools, the Cold-side Piping requires no extra modifications and should only take you about 90 minutes to swap out. Complete with all necessary t-bolt clamps and ultra-resistant couplers, this kit allows for a quick install.

APPLICATION

This product is designed to fit 2017-2020 Ford F-150 3.5L and Raptor EcoBoost models.

Learn More

CV Fab CVF Hot-side Aluminum Intercooler Piping (2017-2020 Ford F-150 3.5L/Raptor EcoBoost) - 100AIC-8

$224.99

| Add to Compare

CV Fab CVF Hot-side Aluminum Intercooler Piping (2017-2020 Ford F-150 3.5L/Raptor EcoBoost) - 100AIC-8

Direct bolt-on replacement Made from 2.5" aluminum in wrinkle black finish Mandrel-bent aluminum construction features significantly improved thermal capacity and 1/3 of the weight when compared to stainless steel alternatives Includes heavy-duty t-bolt clamps and ultra-resistant 4-ply couplers Designed for use with all aftermarket or stock intercoolers CVF Lifetime Warranty

IMPROVES PERFORMANCE

The Hot-side Aluminum Intercooler Piping is designed to improve the performance of your EcoBoost F-150's turbos by improving the performance of your intercooler via a 13% increase in airflow over the OEM alternative. This Piping replaces the restrictive hot-side piping with mandrel-bent aluminum tubing for smoother airflow.

QUALITY CONSTRUCTION

The 2.5" hot-side pipe features mandrel bends to allow for smooth air flow and the ultra-resistance fibers on the silicone couplers offer enhanced tolerance against heat and pressure.

STRAIGHTFORWARD INSTALLATION

Designed to install easily with basic hand tools, the Hot-side Piping requires no extra modifications and should only take you about 90 minutes to swap out. Complete with all necessary t-bolt clamps and ultra-resistant couplers, this kit allows for a quick install.

APPLICATION

This product is designed to fit 2017-2020 Ford F-150 3.5L and Raptor EcoBoost models.

Learn More

Mishimoto MMAI-F35T-17T Turbo Inlet Tube (2017+ Ford F-150 3.5L Ecoboost / 3.5L Raptor)

$395.95

| Add to Compare

PRODUCT FEATURES
Direct fit for 2017-2020 Ford F-150 3.5L EcoBoost
Precision-engineered rotational-molded design provides up to 61% increase in internal volume
5mm-thick rigid inlet tubing resists flexing and cracking
Reduces restriction by up to 23% over stock inlet pipes
No tuning or other modifications required
CNC-machined venturi is flow tested to match the OEM part for CEL-free performance
High-strength cross-linked polyethylene (XLPE) construction withstands high engine bay temperatures and resists degradation from fuel/oil
Eliminates bottlenecks found in factory turbocharger inlet pipes for improved flow
CNC-machined aluminum vacuum ports for leak-free running
Complete kit replaces all tubing and couplers from turbochargers to air intake box
Includes DuraCore™ silicone couplers for leak-free connection between inlet pipes and turbochargers
Includes high-quality stainless-steel clamps for installation
Perfect fitment with both stock air intake and the Mishimoto F-150 EcoBoost Performance Air Intake
Mishimoto Lifetime Warranty

DESCRIPTION
Since its introduction in 2010, the EcoBoost line of V6 engines has proven to be a fantastic alternative to large-displacement V8 options. Ample tuning potential and gobs of torque, all while returning great fuel mileage, make the EcoBoost platform a winner in our book. But, allowing your engine to breathe easier through intake and exhaust modifications can take the already impressive EcoBoost to another level of performance. That's why Mishimoto has developed this turbo inlet tube kit for your 2017-2020 Ford F-150 3.5L EcoBoost.

This turbo inlet tube kit boasts an internal volume increase of up to 61% over the stock inlet pipes to allow your turbos to pull in as much air as they could ever need. Our engineers have also removed bottlenecks and other obstructions to reduce restriction by up to 23% over stock. All of this is achieved while protecting the intake charge from engine bay heat with a cross-linked polyethylene (XLPE) construction. This material is ideal for withstanding high engine bay temperatures and resists degradation from fuel and oil.

To make this kit's reliability match its performance, we've CNC-machined every vacuum fitting from aluminum for a leak-free fit. The included EVAP fitting has also been CNC-machined and flow bench tested to 100% match the OEM part and ensure CEL-free performance. The Mishimoto turbo inlet tubes perform perfectly on the stock tune and fit with both the stock air intake box and the Mishimoto F-150 EcoBoost Performance Air Intake.

The Mishimoto 2017-2020 Ford F-150 3.5L EcoBoost turbo inlet tube kit includes both turbo inlet tubes, DuraCore™ silicone couplers, and stainless-steel clamps for a hassle-free installation. So, toss your restrictive stock turbo inlet tubing in the trash and upgrade your intake airflow with the Mishimoto turbo inlet tube kit. As with all our F-150 EcoBoost products, this kit includes our signature Mishimoto Lifetime Warranty for a lifetime of performance.

PURCHASE INCLUDES
(2) Turbocharger Inlet Tubes
(2) Turbocharger Compressor Inlet Couplers
(1) Evap Hose (used on 2019-2020 model year trucks)
(6) Worm Gear Clamps
Mishimoto Lifetime Warranty
Learn More

video title