Zex EFI WET Nitrous Kit

Fully Adjustable from 75-125HP

A complete "Wet" nitrous system. Everything is included for a safe, proper installation.

Designed to work safely on stock type engines, but is also engineered to perform flawlessly on highly modified turbocharged and supercharged combinations. The ideal nitrous system for any fuel injected vehicle.

All major components are factory pre-assembled inside the "Nitrous Management Unit". Easy, plug and play, two-hour installation.

ZEX Nitrous Systems have an advanced, patented feature called "Active Fuel Control". This feature monitors nitrous bottle pressure and adds or subtracts enrichment fuel so the engine never runs too rich, or too lean, when you engage the nitrous system.

ZEX "Wet" nitrous systems activate at wide-open throttle using advanced electronics that monitor your engine's throttle position sensor. This makes using your nitrous system very easy and reliable.Learn More

The NX Stage 1 EFI nitrous system is the top of the line EFI power booster on the market. From the billet aluminum and carbon fiber solenoids, to our patented Shark nozzle, this system screams nothing but quality.

This system includes a single Shark nozzle, nozzle mounting bung, Lightning series solenoids, 24in D-3 stainless braided solenoid to nozzle lines, 15 Foot D-4 stainless braided nitrous feed line, 18in D-4 fuel feed line, nickel plated fittings, wide open throttle switch, master arming switch, 40 Amp relay, relay harness, Ford fuel rail fitting, stainless bottle brackets and a 10 lb nitrous bottle with the Lightning 45 bottle valve. This system includes jetting for 35, 50, 75, 100 and 150HP. The system can be easily upgraded later to support up to 250HP.

This system includes the latest technology and the best components available. NX Lightning solenoids feature an improved flow path that eliminates sharp turns and expansion areas in the nitrous flow path. This keeps the nitrous in dense liquid form which makes more power on less nitrous. Lightning nitrous solenoids feature an integrated purge port which allows you to connect a purge valve directly to the body of the nitrous solenoid for clean looks and less plumbing. Lightning Series solenoids feature CNC aluminum bodies topped with Carbon Fiber cans for the ultimate in weight savings.

The billet aluminum Lightning 45 bottle valve not only looks great; It is packed with features including an integrated gauge port, an integrated push port, a large .325 orifice and an improved flow path with only one 45 degree turn. The Lightning 45 bottle valve looks sexy, flows great and weighs nearly one full pound less than our old style NX 45 valve.

Learn More

The NX Stage 1 EFI nitrous system is the top of the line EFI power booster on the market. From the billet aluminum and carbon fiber solenoids, to our patented Shark nozzle, this system screams nothing but quality.

This system includes a single Shark nozzle, nozzle mounting bung, Lightning series solenoids, 24in D-3 stainless braided solenoid to nozzle lines, 15 Foot D-4 stainless braided nitrous feed line, 18in D-4 fuel feed line, nickel plated fittings, wide open throttle switch, master arming switch, 40 Amp relay, relay harness, Ford fuel rail fitting, stainless bottle brackets and a 10 lb nitrous bottle with the Lightning 45 bottle valve. This system includes jetting for 35, 50, 75, 100 and 150HP. The system can be easily upgraded later to support up to 250HP.

This system includes the latest technology and the best components available. NX Lightning solenoids feature an improved flow path that eliminates sharp turns and expansion areas in the nitrous flow path. This keeps the nitrous in dense liquid form which makes more power on less nitrous. Lightning nitrous solenoids feature an integrated purge port which allows you to connect a purge valve directly to the body of the nitrous solenoid for clean looks and less plumbing. Lightning Series solenoids feature CNC aluminum bodies topped with Carbon Fiber cans for the ultimate in weight savings.

The billet aluminum Lightning 45 bottle valve not only looks great; It is packed with features including an integrated gauge port, an integrated push port, a large .325 orifice and an improved flow path with only one 45 degree turn. The Lightning 45 bottle valve looks sexy, flows great and weighs nearly one full pound less than our old style NX 45 valve.

Learn More

The NX Stage 1 EFI nitrous system is the top of the line EFI power booster on the market. From the billet aluminum and carbon fiber solenoids, to our patented Shark nozzle, this system screams nothing but quality.

This system includes a single Shark nozzle, nozzle mounting bung, Lightning series solenoids, 24in D-3 stainless braided solenoid to nozzle lines, 15 Foot D-4 stainless braided nitrous feed line, 18in D-4 fuel feed line, nickel plated fittings, wide open throttle switch, master arming switch, 40 Amp relay, relay harness, Ford fuel rail fitting, stainless bottle brackets and a 10 lb nitrous bottle with the Lightning 45 bottle valve. This system includes jetting for 35, 50, 75, 100 and 150HP. The system can be easily upgraded later to support up to 250HP.

This system includes the latest technology and the best components available. NX Lightning solenoids feature an improved flow path that eliminates sharp turns and expansion areas in the nitrous flow path. This keeps the nitrous in dense liquid form which makes more power on less nitrous. Lightning nitrous solenoids feature an integrated purge port which allows you to connect a purge valve directly to the body of the nitrous solenoid for clean looks and less plumbing. Lightning Series solenoids feature CNC aluminum bodies topped with Carbon Fiber cans for the ultimate in weight savings.

The billet aluminum Lightning 45 bottle valve not only looks great; It is packed with features including an integrated gauge port, an integrated push port, a large .325 orifice and an improved flow path with only one 45 degree turn. The Lightning 45 bottle valve looks sexy, flows great and weighs nearly one full pound less than our old style NX 45 valve.

Learn More

The NX Stage 1 EFI nitrous system is the top of the line EFI power booster on the market. From the billet aluminum and carbon fiber solenoids, to our patented Shark nozzle, this system screams nothing but quality.

This system includes a single Shark nozzle, nozzle mounting bung, Lightning series solenoids, 24in D-3 stainless braided solenoid to nozzle lines, 15 Foot D-4 stainless braided nitrous feed line, 18in D-4 fuel feed line, nickel plated fittings, wide open throttle switch, master arming switch, 40 Amp relay, relay harness, Ford fuel rail fitting, stainless bottle brackets and a 10 lb nitrous bottle with the Lightning 45 bottle valve. This system includes jetting for 35, 50, 75, 100 and 150HP. The system can be easily upgraded later to support up to 250HP.

This system includes the latest technology and the best components available. NX Lightning solenoids feature an improved flow path that eliminates sharp turns and expansion areas in the nitrous flow path. This keeps the nitrous in dense liquid form which makes more power on less nitrous. Lightning nitrous solenoids feature an integrated purge port which allows you to connect a purge valve directly to the body of the nitrous solenoid for clean looks and less plumbing. Lightning Series solenoids feature CNC aluminum bodies topped with Carbon Fiber cans for the ultimate in weight savings.

The billet aluminum Lightning 45 bottle valve not only looks great; It is packed with features including an integrated gauge port, an integrated push port, a large .325 orifice and an improved flow path with only one 45 degree turn. The Lightning 45 bottle valve looks sexy, flows great and weighs nearly one full pound less than our old style NX 45 valve.

Learn More

The NX Stage 1 EFI nitrous system is the top of the line EFI power booster on the market. From the billet aluminum and carbon fiber solenoids, to our patented Shark nozzle, this system screams nothing but quality.

This system includes a single Shark nozzle, nozzle mounting bung, Lightning series solenoids, 24in D-3 stainless braided solenoid to nozzle lines, 15 Foot D-4 stainless braided nitrous feed line, 18in D-4 fuel feed line, nickel plated fittings, wide open throttle switch, master arming switch, 40 Amp relay, relay harness, Ford fuel rail fitting, stainless bottle brackets and a 10 lb nitrous bottle with the Lightning 45 bottle valve. This system includes jetting for 35, 50, 75, 100 and 150HP. The system can be easily upgraded later to support up to 250HP.

This system includes the latest technology and the best components available. NX Lightning solenoids feature an improved flow path that eliminates sharp turns and expansion areas in the nitrous flow path. This keeps the nitrous in dense liquid form which makes more power on less nitrous. Lightning nitrous solenoids feature an integrated purge port which allows you to connect a purge valve directly to the body of the nitrous solenoid for clean looks and less plumbing. Lightning Series solenoids feature CNC aluminum bodies topped with Carbon Fiber cans for the ultimate in weight savings.

The billet aluminum Lightning 45 bottle valve not only looks great; It is packed with features including an integrated gauge port, an integrated push port, a large .325 orifice and an improved flow path with only one 45 degree turn. The Lightning 45 bottle valve looks sexy, flows great and weighs nearly one full pound less than our old style NX 45 valve.

Learn More

If you want the best, this is it. The NX EFI Race nitrous system is the top of the line EFI Single nozzle system. From the highest flowing solenoids, to our patented Shark nozzle, and billet aluminum Lightning bottle valve this system screams nothing but quality.

This system includes a single Shark nozzle, nozzle mounting bung, Lightning series solenoids, stainless braided solenoid to nozzle lines, 15 Foot 4AN stainless braided nitrous feed line, 18in 4AN fuel feed line, nickel plated fittings, wide open throttle switch, master arming switch, 40 Amp relay and relay harness, and jetting for 100, 150, 200 & 250HP.

This system includes the latest technology and the best components available. NX Lightning solenoids feature an improved flow path that eliminates sharp turns and expansion areas in the nitrous flow path. This keeps the nitrous in dense liquid form which makes more power on less nitrous. Lightning nitrous solenoids feature an integrated purge port which allows you to connect a purge valve directly to the body of the nitrous solenoid for clean looks and less plumbing. Lightning Series solenoids feature CNC aluminum bodies topped with Carbon Fiber cans for the ultimate in weight savings.

Learn More

If you want the best, this is it. The NX EFI Race nitrous system is the top of the line EFI Single nozzle system. From the highest flowing solenoids, to our patented Shark nozzle, and billet aluminum Lightning bottle valve this system screams nothing but quality.

This system includes a single Shark nozzle, nozzle mounting bung, Lightning series solenoids, stainless braided solenoid to nozzle lines, 15 Foot 4AN stainless braided nitrous feed line, 18in 4AN fuel feed line, nickel plated fittings, wide open throttle switch, master arming switch, 40 Amp relay and relay harness, and jetting for 100, 150, 200 & 250HP.

This system includes the latest technology and the best components available. NX Lightning solenoids feature an improved flow path that eliminates sharp turns and expansion areas in the nitrous flow path. This keeps the nitrous in dense liquid form which makes more power on less nitrous. Lightning nitrous solenoids feature an integrated purge port which allows you to connect a purge valve directly to the body of the nitrous solenoid for clean looks and less plumbing. Lightning Series solenoids feature CNC aluminum bodies topped with Carbon Fiber cans for the ultimate in weight savings.

Learn More