Steeda's Focus ST Ram Air Intake Scoop for 2013-2018 MK3 Ford Focus ST allows your intake to receive the most direct and non-turbulent cold air straight from the front of the car. The more direct induction of fresh air creates lower air inlet temperatures, resulting in horsepower and torque increase.

Unlike our competitors' products, the Steeda Focus ST Ram Air Intake Scoop is far superior in that it allows for a more natural "velocity effect," in which air flows from a large opening to a smaller entrance in the intake - resulting in direct, free-flowing, and cooler air. Best of all, it's compatible with stock and aftermarket cold air intakes!

Purchase your Steeda Focus ST Ram Air Intake Scoop for your 2013-2018 2.0L EcoBoost Focus ST at Steeda Autosports today!

After you free up the majority of the turbo air intake restriction with our Steeda Cold Air intake for your 2.0L EcoBoost Focus ST, you can finish the intake system off and gain up to 5 more horsepower over the 10 to 12 horsepower the cold air kit already provides with our Steeda Focus ST Cold Air Inlet Tube Intake for 2015-2018 MK3 Ford Focus ST.

Manufactured from high-quality aluminum material, this Steeda Focus ST Cold Air Inlet Tube Intake directly replaces the air intake hose between the cold air intake box and the turbo inlet, removing what little restriction is left in the intake system. Being made from aluminum will keep the weight down and crank the performance up!

Purchase your Steeda Focus ST Cold Air Inlet Tube Intake for your EcoBoost at Steeda Autosports today!

Note: To be used with Steeda Cold Air Intake ONLY

The MK3 2013-2018 Ford Focus ST is a fantastic performance platform that while already very good, can still be taken to the next level. Take the intake system of your 2.0L EcoBoost Focus ST to the next level with our in-house designed, tested, and manufactured Steeda Focus ST Cold Air Intake.

This Steeda Focus ST Cold Air Intake for 2013-2016 Focus ST does not require any ECM tuning making it an easy direct bolt on. With peak to peak gains of 10 horsepower at the wheels and max gains of up to 16 horsepower, these are performance gains you will definitely feel. Our system incorporates a roto-molded thermoplastic airbox, a precision-molded thermoplastic velocity stack, a high-flow serviceable air filter, and a silicone intake tube.

Lower IATs. The Steeda cold air intake gives your Mk3 Focus better intake air temperatures, this results in better performance and improved fuel economy. The lower IATs are a result of the design of the airbox, high flow filter, and the precision-molded thermoplastic velocity stack. The airbox was designed to utilize the cold air feed coming from the grille while sealing directly to the hood liner to ensure a cool, dense air charge to the engine. 

A suggested add-on is Steeda's Focus ST Ram Air Intake Scoop for 13-18 ST.

Purchase your Steeda Focus ST Cold Air Intake for your 20132018 Focus ST at Steeda Autosports today!

Warning: Not approved for sale in California or states that require a California E.O. #. This part has been designed and is intended for off-road application only. Installation of this part on a vehicle that is driven on public roads may violate U.S. and Canadian laws and regulations.

Note: Federal and several state and provincial laws prohibit the removal, modification or rendering inoperative of any part that affects emissions or safety on motor vehicles used on public streets or highways. Steeda Autosports assumes no liability for any violations arising out of any federal, state or provincial emissions or safety requirements on motor vehicles arising out of the customer's modifications and/or use of Steeda products. It is the responsibility of the customer to determine if their modified vehicle complies with applicable laws.

This limited warranty is the only express warranty applicable to Steeda Autosports products. Other rights may arise or vary from state to state in the United States. Steeda is not responsible for any time for which you may lose the use of your vehicle, any inconvenience you might be caused, the loss of your transportation or any part thereof, or any other incidental or consequential damages you may have.

After you free up the majority of the turbo air intake restriction with our Steeda Cold Air intake for your MK3 Ford Focus ST, you can finish the intake system off and gain up to 5 more horsepower over the 10 to 12 horsepower the cold air kit already provides with our Steeda Focus ST Cold Air Inlet Tube Intake for 2013-2014 Ford Focus ST.

Manufactured from high-quality aluminum material, this Steeda 2.0L EcoBoost Cold Air Inlet Tube Intake directly replaces the air intake hose between the cold air intake box and the turbo inlet, removing what little restriction is left in the intake system. Being made from aluminum will keep the weight down and the performance up!

Purchase your Steeda Focus ST Cold Air Inlet Tube Intake for your 2013-2014 Focus ST at Steeda Autosports today!

Note: To be used with Steeda Cold Air Intake ONLY

This adapter allows our original Ford Focus ST Intake kit to be installed on the 2015 Focus ST. Intake kits purchased prior to June of 2015 require this adapter in order to be used with the 2015 Focus ST. Machined out of billet aluminum, the adapter allows use with the factory PCV return hose.

This adapter allows our original (Ordered prior to June 2015) Ford Focus ST Intake kit to be installed on the 2015 Ford Focus ST.