SCT Livewire Touch Screen Custom Flash Programmer Features:
Performance calc for 1/8 Mile ET, 1/4 Mile ET and 0-60mph with estimated HP & TQ
User Adjustable Features and Graphics
Rear View Camera Input
4" Color Touch Screen Display
Diagnose / Read / Clear DTC Trouble Codes
User Adjustable Warning / Alerts
High Speed Datalogging
Automatic On / Off / Sleep Mode

Adjustable Parameters.Traction Control On / Off
Transmission Shift Points
Tire Size - Rev / Mile
Cooling Fan Temps
WOT Fuel Adjustment
Idle RPM
Spark Adjustment
Axle Ratio
Fuel Injector Size
Air Intake Selection
Rev / Speed Limiters
Two Step On / Off RPM

Learn More

Its time to get more power out of your Ford Mustang EcoBoost with the 2.3L turbo engine. The 2015 and up model has untapped resources and VR Tuned can help bring this performance out. New to the Mustang world is factory turbochargers, but this is not new to VR Tuned. We know how to get the most out of turbocharged vehicles. Gain up to 50 horsepower and 60 ft/lbs of torque with our ECU Flash. While dyno sheets are great to show where power is made at the peak, what is more important is how it drives on the street throughout the entire curve. Along with improved performance numbers comes better throttle response, faster 0-60mph time, and a stronger top end pull on the highway. The tune can be used on both automatic or manual cars. Crank Horsepower Ratings: Stock Power: 314HP | 320ft/lbs Stage 1 Power: 345HP | 361ft/lbs Stage 2 Power: 362HP | 381ft/lbs What are the benefits of VR Tuned? #1 priority is our customer service to you! Our tuning is used worldwide. We have powered vehicles of all types. All ECU tunes can be reverted back to stock if necessary. With the VR Tuned ECU Flash, basic bolt-on performance parts will not require a retune of your ECU. Adding parts such as an exhaust, intake, plenum, pulley, will all adjust with the tune. If you add higher octane fuel, the ECU will adjust accordingly. We can tune cars worldwide including JDM, EU, Australian, and USA cars for different types of octane or environments. Other custom enhancements are available if requested and applicable. We test and dyno tune on our own cars to make sure what you get is safe, reliable, and gives you the results you want! How to Flash Your ECU? Use the Alientech Powergate 3+ handheld device. This device is a touchscreen module that lets you store your original and tuned files to easily flash between them. See Instructions Here. Bring your vehicle to our facility where we can use our Master Tool to flash your vehicle. We can bench flash the ECU. To bench flash the ECU, you must remove it from your vehicle and send it to us. Once we receive the ECU, we will prepare the tune file and then ship it back to you for re-installation. We do not solder or modify the ECU board at all. All ECU tuning is done via bungy probes that have a needle tip to provide an electrical connection. Options: You can select to get both Stages of our Tune. The Stage 2 is usually for those looking to maximize the performance of their vehicle. Though not required unless stated, this is usually for those running a full performance exhaust system and other bolt-on parts. Can only be done if OBDII flashing hardware is purchased.Learn More