2021-2024 Bronco Coilovers

Icon Front 2.5 VS Remote Reservoir with CDCV Coilover Kit (2021-2024 Ford Bronco) - 48700C

$2,368.95

| Add to Compare

These precision-manufactured, custom valved Internal Reservoir coilover shocks yield the maximum travel possible along with superior ride quality and suspension performance both on- and off-road. ICON coilover shocks are fully rebuildable. Our coil springs are custom engineered specifically for Bronco. The big 2.5-in diameter shock body and piston provides efficient damping and cooling, while the massive 7/8" diameter shock rod provides the strength to withstand abuse. The rear shocks are oriented shaft-up with unique triple-rate coil springs to achieve the most rear suspension travel possible.

These ICON 2.5 Series coilover shocks are engineered to give the 2021+ Bronco outstanding performance off-road and a smooth ride on the street. Our desert-tested, race-proven shock technology provides superior damping, tuned specifically for the Bronco's suspension and vehicle characteristics. CNC machined shock ends and mounts, body and shaft lengths and coil springs have been custom configured to squeeze maximum travel and articulation out of the Bronco's suspension geometry while providing increased lift height to safely accommodate up to 37-inch* tires. Like all ICON shock absorbers, V.S. 2.5 Series shocks are 100% rebuildable and 100% revalveable.

When used in conjunction with ICON tubular or billet front Upper Control Arms and Rear Suspension Links and 35" tires*, these coilovers can yield up to 14" of rear suspension travel and up to 11.5" of front suspension travel.

Factory set for approximately 3" suspension lift (for Sasquatch-equipped Broncos; approximately 4" lift for non-Sasquatch Broncos)
Threaded body allows for further lift height adjustment at installer's discretion(adjustable from 2.5-4" of lift height)
Increased wheel travel, up to 14" rear, 11.5" front
100% Bolt-on, no cutting or welding necessary for installation
Vehicle specific design, engineered for maximum performance with Bronco suspension geometry.
CNC machined 6061 aluminum components with a black anodize finish.
High strength alloy CNC machined lower bar pin
ICON engineered coil springs with long-travel, triple-rate rear coil spring
FK rod end bearings for extended longevity and minimal deflection.

*Coilovers are factory-setup for optimal ride height and travel when paired with factory Sasquatch wheels and tires, or aftermarket 35-12.50-17 tires and 17x8.5, 0" offset wheels. 37" tires will also fit but we recommend using our Up-Travel Limiters (sold separately) when installing 37's.

Learn More

Radflo 2.5 Inch Rear Coil Overs with Remote Reservoirs and Adjusters (2021-2024 Ford Bronco) - 6CF-011-0A

$2,100.00

| Add to Compare

Take your Bronco to new heights with Radflo’s OE Replacement 2.5” Diameter Front and Rear Coil Over Shocks. The Bronco’s stock suspension package is okay, but Radflo knew we could improve upon it in a big way – and that is exactly what we did. We developed a ride-height-adjustable rear coil over which will allow the user to add between 0-2.0” of lift to their Bronco. In addition to the ability to add lift to the new Bronco, our OE Replacement shocks will offer Bronco owners improved handling and ride quality both on and off-road. With more than 16 years of race-winning technology poured into these shocks, we are confident that Bronco owners will find plenty of reasons to love this upgraded shock package. With optional features like remote reservoirs and compression adjusters, Bronco owners will have the ability to fine-tune each corner of their truck for varying payloads and driving conditions. Like all of our shocks, each Bronco shock is built to order and is valved specifically for this platform. These features, coupled with Radflo Suspension Technology’s incredible customer service set these shocks apart from the competition and will do the same for you and your Bronco. Go. Explore. **Rear Coil Overs Compatible with Base and Sasquatch Package.**Learn More

Radflo 2.5 Inch Front Coil Overs with Remote Reservoirs and Adjusters - Standard Travel (2021-2024 Ford Bronco) - 6CF-010-0A

$2,100.00

| Add to Compare

Take your Bronco to new heights with Radflo’s OE Replacement 2.5” Diameter Front and Rear Coil Over Shocks. The Bronco’s stock suspension package is okay, but Radflo knew we could improve upon it in a big way – and that is exactly what we did. We developed a ride-height-adjustable front coil over which will allow the user to add between 0-2.0” of lift to their Bronco, while our extended travel option will allow for 2.0” to 3.0” inches of lift with an aftermarket upper control arm.** In addition to the ability to add lift to the new Bronco, our OE Replacement shocks will offer Bronco owners improved handling and ride quality both on and off-road. With more than 16 years of race-winning technology poured into these shocks, we are confident that Bronco owners will find plenty of reasons to love this upgraded shock package. With optional features like remote reservoirs and compression adjusters, Bronco owners will have the ability to fine-tune each corner of their truck for varying payloads and driving conditions. Like all of our shocks, each Bronco shock is built to order and is valved specifically for this platform. These features, coupled with Radflo Suspension Technology’s incredible customer service set these shocks apart from the competition and will do the same for you and your Bronco. Go. Explore. **Standard Travel Coil Overs are compatible with Base and Sasquatch Package.**Learn More

Radflo 2.5 Inch Front Coil Overs with Remote Reservoirs and Adjusters - Extended Travel (2021-2024 Ford Bronco) - 6CF-010-1A

$2,100.00

| Add to Compare

Take your Bronco to new heights with Radflo’s OE Replacement 2.5” Diameter Front and Rear Coil Over Shocks. The Bronco’s stock suspension package is okay, but Radflo knew we could improve upon it in a big way – and that is exactly what we did. We developed a ride-height-adjustable front coil over which will allow the user to add between 0-2.0” of lift to their Bronco, while our extended travel option will allow for 2.0” to 3.0” inches of lift with an aftermarket upper control arm.** In addition to the ability to add lift to the new Bronco, our OE Replacement shocks will offer Bronco owners improved handling and ride quality both on and off-road. With more than 16 years of race-winning technology poured into these shocks, we are confident that Bronco owners will find plenty of reasons to love this upgraded shock package. With optional features like remote reservoirs and compression adjusters, Bronco owners will have the ability to fine-tune each corner of their truck for varying payloads and driving conditions. Like all of our shocks, each Bronco shock is built to order and is valved specifically for this platform. These features, coupled with Radflo Suspension Technology’s incredible customer service set these shocks apart from the competition and will do the same for you and your Bronco. Go. Explore. **Extended Travel Coil Overs are ONLY compatible with Sasquatch Package and Aftermarket UCA's**Learn More

Icon Rear 2.5 VS Remote Reservoir with CDEV Coilover Kit (2021-2024 Ford Bronco) - 48710E

From: $2,799.95

To: $3,329.90

| Add to Compare

ICON's Top Of The Range coilover features lightning fast, precise electronic shock tuning, on-the-fly, at any speed and in any terrain. Focus on driving and let ICON Intelligent Control (IIC) read the terrain and make near-instant adjustments via the Compression Damping Electronic Valve (CDEV) at each individual shock. Control the system wirelessly through the IIC app on your phone. Once configured the system functions without driver input.

These ICON 2.5 Series coilover shocks are engineered to give the 2021+ Bronco outstanding performance off-road and a smooth ride on the street. Our desert-tested, race-proven shock technology provides superior damping, tuned specifically for the Bronco's suspension and vehicle characteristics. CNC machined shock ends and mounts, body and shaft lengths and coil springs have been custom configured to squeeze maximum travel and articulation out of the Bronco's suspension geometry while providing increased lift height to safely accommodate up to 37-inch* tires. Like all ICON shock absorbers, V.S. 2.5 Series shocks are 100% rebuildable and 100% revalveable.

When used in conjunction with ICON tubular or billet front Upper Control Arms and Rear Suspension Links and 35" tires*, these coilovers can yield up to 14" of rear suspension travel and up to 11.5" of front suspension travel.

Factory set for approximately 3" suspension lift (for Sasquatch-equipped Broncos; approximately 4" lift for non-Sasquatch Broncos)
Threaded body allows for further lift height adjustment at installer's discretion(adjustable from 2.5-4" of lift height)
Increased wheel travel, up to 14" rear, 11.5" front
100% Bolt-on, no cutting or welding necessary for installation
Vehicle specific design, engineered for maximum performance with Bronco suspension geometry.
CNC machined 6061 aluminum components with a black anodize finish.
High strength alloy CNC machined lower bar pin
ICON engineered coil springs with long-travel, triple-rate rear coil spring
FK rod end bearings for extended longevity and minimal deflection.

*Coilovers are factory-setup for optimal ride height and travel when paired with factory Sasquatch wheels and tires, or aftermarket 35-12.50-17 tires and 17x8.5, 0" offset wheels. 37" tires will also fit but we recommend using our Up-Travel Limiters (sold separately) when installing 37's.

Learn More

Icon Front 2.5 VS Remote Reservoir with CDEV Coilover Kit (2021-2024 Ford Bronco) - 48700E

From: $2,699.95

To: $3,229.90

| Add to Compare

ICON's Top Of The Range coilover features lightning fast, precise electronic shock tuning, on-the-fly, at any speed and in any terrain. Focus on driving and let ICON Intelligent Control (IIC) read the terrain and make near-instant adjustments via the Compression Damping Electronic Valve (CDEV) at each individual shock. Control the system wirelessly through the IIC app on your phone. Once configured the system functions without driver input.

These ICON 2.5 Series coilover shocks are engineered to give the 2021+ Bronco outstanding performance off-road and a smooth ride on the street. Our desert-tested, race-proven shock technology provides superior damping, tuned specifically for the Bronco's suspension and vehicle characteristics. CNC machined shock ends and mounts, body and shaft lengths and coil springs have been custom configured to squeeze maximum travel and articulation out of the Bronco's suspension geometry while providing increased lift height to safely accommodate up to 37-inch* tires. Like all ICON shock absorbers, V.S. 2.5 Series shocks are 100% rebuildable and 100% revalveable.

When used in conjunction with ICON tubular or billet front Upper Control Arms and Rear Suspension Links and 35" tires*, these coilovers can yield up to 14" of rear suspension travel and up to 11.5" of front suspension travel.

Factory set for approximately 3" suspension lift (for Sasquatch-equipped Broncos; approximately 4" lift for non-Sasquatch Broncos)
Threaded body allows for further lift height adjustment at installer's discretion(adjustable from 2.5-4" of lift height)
Increased wheel travel, up to 14" rear, 11.5" front
100% Bolt-on, no cutting or welding necessary for installation
Vehicle specific design, engineered for maximum performance with Bronco suspension geometry.
CNC machined 6061 aluminum components with a black anodize finish.
High strength alloy CNC machined lower bar pin
ICON engineered coil springs with long-travel, triple-rate rear coil spring
FK rod end bearings for extended longevity and minimal deflection.

*Coilovers are factory-setup for optimal ride height and travel when paired with factory Sasquatch wheels and tires, or aftermarket 35-12.50-17 tires and 17x8.5, 0" offset wheels. 37" tires will also fit but we recommend using our Up-Travel Limiters (sold separately) when installing 37's.

Learn More

Icon Rear 2.5 VS Remote Reservoir with CDCV Coilover Kit (2021-2024 Ford Bronco) - 48710C

$2,399.95

| Add to Compare

These precision-manufactured, custom valved Internal Reservoir coilover shocks yield the maximum travel possible along with superior ride quality and suspension performance both on- and off-road. ICON coilover shocks are fully rebuildable. Our coil springs are custom engineered specifically for Bronco. The big 2.5-in diameter shock body and piston provides efficient damping and cooling, while the massive 7/8" diameter shock rod provides the strength to withstand abuse. The rear shocks are oriented shaft-up with unique triple-rate coil springs to achieve the most rear suspension travel possible.

These ICON 2.5 Series coilover shocks are engineered to give the 2021+ Bronco outstanding performance off-road and a smooth ride on the street. Our desert-tested, race-proven shock technology provides superior damping, tuned specifically for the Bronco's suspension and vehicle characteristics. CNC machined shock ends and mounts, body and shaft lengths and coil springs have been custom configured to squeeze maximum travel and articulation out of the Bronco's suspension geometry while providing increased lift height to safely accommodate up to 37-inch* tires. Like all ICON shock absorbers, V.S. 2.5 Series shocks are 100% rebuildable and 100% revalveable.

When used in conjunction with ICON tubular or billet front Upper Control Arms and Rear Suspension Links and 35" tires*, these coilovers can yield up to 14" of rear suspension travel and up to 11.5" of front suspension travel.

Factory set for approximately 3" suspension lift (for Sasquatch-equipped Broncos; approximately 4" lift for non-Sasquatch Broncos)
Threaded body allows for further lift height adjustment at installer's discretion(adjustable from 2.5-4" of lift height)
Increased wheel travel, up to 14" rear, 11.5" front
100% Bolt-on, no cutting or welding necessary for installation
Vehicle specific design, engineered for maximum performance with Bronco suspension geometry.
CNC machined 6061 aluminum components with a black anodize finish.
High strength alloy CNC machined lower bar pin
ICON engineered coil springs with long-travel, triple-rate rear coil spring
FK rod end bearings for extended longevity and minimal deflection.

*Coilovers are factory-setup for optimal ride height and travel when paired with factory Sasquatch wheels and tires, or aftermarket 35-12.50-17 tires and 17x8.5, 0" offset wheels. 37" tires will also fit but we recommend using our Up-Travel Limiters (sold separately) when installing 37's.

Learn More

Icon Rear 2.5 VS Remote Reservoir Coilover Kit (2021-2024 Ford Bronco) - 48710

$2,199.95

| Add to Compare

These precision-manufactured, custom valved Internal Reservoir coilover shocks yield the maximum travel possible along with superior ride quality and suspension performance both on- and off-road. ICON coilover shocks are fully rebuildable. Our coil springs are custom engineered specifically for Bronco. The big 2.5-in diameter shock body and piston provides efficient damping and cooling, while the massive 7/8" diameter shock rod provides the strength to withstand abuse. The rear shocks are oriented shaft-up with unique triple-rate coil springs to achieve the most rear suspension travel possible.

These ICON 2.5 Series coilover shocks are engineered to give the 2021+ Bronco outstanding performance off-road and a smooth ride on the street. Our desert-tested, race-proven shock technology provides superior damping, tuned specifically for the Bronco's suspension and vehicle characteristics. CNC machined shock ends and mounts, body and shaft lengths and coil springs have been custom configured to squeeze maximum travel and articulation out of the Bronco's suspension geometry while providing increased lift height to safely accommodate up to 37-inch* tires. Like all ICON shock absorbers, V.S. 2.5 Series shocks are 100% rebuildable and 100% revalveable.

When used in conjunction with ICON tubular or billet front Upper Control Arms and Rear Suspension Links and 35" tires*, these coilovers can yield up to 14" of rear suspension travel and up to 11.5" of front suspension travel.

Factory set for approximately 3" suspension lift (for Sasquatch-equipped Broncos; approximately 4" lift for non-Sasquatch Broncos)
Threaded body allows for further lift height adjustment at installer's discretion(adjustable from 2.5-4" of lift height)
Increased wheel travel, up to 14" rear, 11.5" front
100% Bolt-on, no cutting or welding necessary for installation
Vehicle specific design, engineered for maximum performance with Bronco suspension geometry.
CNC machined 6061 aluminum components with a black anodize finish.
High strength alloy CNC machined lower bar pin
ICON engineered coil springs with long-travel, triple-rate rear coil spring
FK rod end bearings for extended longevity and minimal deflection.

*Coilovers are factory-setup for optimal ride height and travel when paired with factory Sasquatch wheels and tires, or aftermarket 35-12.50-17 tires and 17x8.5, 0" offset wheels. 37" tires will also fit but we recommend using our Up-Travel Limiters (sold separately) when installing 37's.

Learn More

Fox Racing 2.5 RR Elite DSC Rear Adjustable Coilovers (2.5-4.5" lift) (2021+ Ford Bronco 2-Door) 883-06-210

$2,399.95

| Add to Compare

FOX Performance Elite 2.5 Series shocks for the new full-size Ford Bronco are designed and engineered by off-road enthusiasts to enhance comfort, maximize articulation, and increase compliance in the dirt. You also gain 20% more travel over the stock shocks.

FOX's progressively wound springs provide extra clearance and movement to unlock your Bronco’s entire range of usable travel in both jounce and droop positions. These springs were specifically chosen to compliment the Bronco’s IFS design to offer a uniquely soft ride and better control through rough terrain.

The shocks’ 2.5-inch aluminum bodies and external reservoirs efficiently dissipate heat by increasing internal oil capacity, while the remote reservoirs with Dual Speed Compression (DSC) adjusters are strategically mounted to clear aggressive mud tires and leave space for aftermarket skid plates and bumpers.

Easily adapt your shocks for load, environment, and driving style using the DSC adjusters as the large capacity dampers manage stability through all types of terrain. Additionally, you have a generous amount of preload adjustment to maintain your Bronco’s ideal ride height while supporting a wide range of essential added gear.

FOX shocks provide the versatility required to navigate backcountry terrain on the weekend and tackle your daily commute to remain comfortable and in control.

Features:
2.5” impact-extruded and CNC-machined 6061-T6 hard-anodized aluminum body
Application-specific, custom progressive springs
7/8” hard chrome-plated steel shafts
Vehicle-specific valving to maximize performance
2.5” smooth bore and honed seamless alloy reservoir with Dual Speed Compression (DSC) adjuster

Benefits:
Unlock all travel available in jounce and droop positions
Maximize comfort and control through any terrain
Remote reservoirs are mounted to clear larger tires and aftermarket parts
Maintain optimal ride height with wide-range preload adjustment
Provide a 3” lift for Sasquatch Bronco and a 4” lift on a non-Sasquatch equipped Bronco
Soft, progressive springs enhance articulation and increase stability

DUAL SPEED COMPRESSION (DSC) ADJUSTER
Add remarkable versatility and precise tuning with Fox's DSC adjuster. A simple twist of either two adjuster knobs allows 10 separate low-speed and 12 high-speed compression levels. Included new black anodized aluminum reservoir increases cooling efficiency.

Sold as a PAIR with all needed mounting hardware for both shocks and reservoirsLearn More

video title