AFE Sealed Intake (2011-2019 Dodge Charger V8-5.7L) - 51-72202

Momentum GT Cold Air Intake System w/ Pro DRY S Media

Lethal Performance is proud to offer the entire line of AFE products!

advanced FLOW engineering (aFe Power) is a premier designer and manufacturer of automotive performance upgrade systems and components. Current product lines include cold air intake systems, high performance direct fit and racing air filters, exhaust systems, intercoolers, turbochargers, electronic programmers, diesel fuel systems, throttle body spacers, and more. aFe is passionate about providing the most compelling, innovative, and highest performing products that are designed, built and tested in the USA. aFe was founded in 1999 and has headquarters and manufacturing facilities in Corona, California, USA.

This item is 50-state legal D-550-22Learn More

DETAILS:
Dyno-Proven Gains up to +17 HP & +21 Lbs. x Ft. TQ (Tested on 2018 Challenger SRT Demon) Outflows Factory Intake by 20% Measured Flow: 855 CFM @ 7” H20 Open-Element Design Showcases the Air Filter and Delivers an Aggressive Air Intake Sound Housing Seals to Hood Scoop, Collecting Cool Outside Air Along w/ Headlight Air Inlet Washable and Reusable Pro DRY S Air Filter for Maximum Convenience Innovative Filter-to-Housing Interface for Easy Installation (Roughly 30 Minutes) Premium Stainless-Steel Clamps and Silicone Bellow Couplings Provide a Secure Seal Utilizes Factory Mounting Locations for an Easy and Secure Installation

Large Three Layer Performance Air Filter:
This 10” tall 360-degree radial flow air filter features our oil-free Pro DRY S media with three layers of synthetic media for maximum convenience. Its progressive layering provides great filtration efficiency and dust holding capacity, while not requiring the use of oils. This media is best suited for street use. This air filter was specially designed for the SRT Hellcat / SRT Demon / SRT Redeye.

Heat-Resistant Housing:
The included massive air filter is surrounded by an open-element XLPE (cross-linked polyethylene) polymer housing that minimizes warm engine air for maximum performance. Its open design allows for easy viewing of the massive air filter, yet seals to the hood to gather air from the factory hood scoop. The housing also connects to the factory headlight air inlet thanks to the scoop inlet provided.

Dyno-Tuned Intake Tube:
This system features a high quality, computer-designed, dyno-tuned intake tube to achieve maximum power gains while maintaining a perfect fit. Its XLPE material is heat soak resistant and extremely durable.

Premium Hardware:
This is a direct fit intake system that utilizes factory mounting points. All necessary clamps, a silicone bellows coupling, and all other hardware is included.

FCA Multi-Air Unit Actuator:
For the SRT Hellcat and SRT Hellcat Redeye, the factory MUA (Multi-Air Unit Actuator) is easily connected to the air intake tube. All clamps and hose are provided to guarantee correct crankcase flow, avoiding check engine lights and damaging factory hoses and sensors.

Emissions Disclaimer:
This product is not currently CARB exempt and is not available for purchase in California or for use on any vehicle registered with the California Department of Motor Vehicles.Learn More

DETAILS:
Dyno-Proven Gains up to +17 HP & +21 Lbs. x Ft. TQ (Tested on 2018 Challenger SRT Demon) Outflows Factory Intake by 20% Measured Flow: 855 CFM @ 7” H20 Open-Element Design Showcases the Air Filter and Delivers an Aggressive Air Intake Sound Housing Seals to Hood Scoop, Collecting Cool Outside Air Along w/ Headlight Air Inlet Washable and Reusable Pro DRY S Air Filter for Maximum Convenience Innovative Filter-to-Housing Interface for Easy Installation (Roughly 30 Minutes) Premium Stainless-Steel Clamps and Silicone Bellow Couplings Provide a Secure Seal Utilizes Factory Mounting Locations for an Easy and Secure Installation

Large Three Layer Performance Air Filter:
This 10” tall 360-degree radial flow air filter features our oil-free Pro DRY S media with three layers of synthetic media for maximum convenience. Its progressive layering provides great filtration efficiency and dust holding capacity, while not requiring the use of oils. This media is best suited for street use. This air filter was specially designed for the SRT Hellcat / SRT Demon / SRT Redeye.

Heat-Resistant Housing:
The included massive air filter is surrounded by an open-element XLPE (cross-linked polyethylene) polymer housing that minimizes warm engine air for maximum performance. Its open design allows for easy viewing of the massive air filter, yet seals to the hood to gather air from the factory hood scoop. The housing also connects to the factory headlight air inlet thanks to the scoop inlet provided.

Dyno-Tuned Intake Tube:
This system features a high quality, computer-designed, dyno-tuned intake tube to achieve maximum power gains while maintaining a perfect fit. Its XLPE material is heat soak resistant and extremely durable.

Premium Hardware:
This is a direct fit intake system that utilizes factory mounting points. All necessary clamps, a silicone bellows coupling, and all other hardware is included.

FCA Multi-Air Unit Actuator:
For the SRT Hellcat and SRT Hellcat Redeye, the factory MUA (Multi-Air Unit Actuator) is easily connected to the air intake tube. All clamps and hose are provided to guarantee correct crankcase flow, avoiding check engine lights and damaging factory hoses and sensors.

Emissions Disclaimer:
This product is not currently CARB exempt and is not available for purchase in California or for use on any vehicle registered with the California Department of Motor Vehicles.Learn More

AFE Sealed Intake (2011-2019 Dodge Charger V8-6.4L) - 54-72203

Momentum GT Cold Air Intake System w/ Pro 5R Media

Lethal Performance is proud to offer the entire line of AFE products!

advanced FLOW engineering (aFe Power) is a premier designer and manufacturer of automotive performance upgrade systems and components. Current product lines include cold air intake systems, high performance direct fit and racing air filters, exhaust systems, intercoolers, turbochargers, electronic programmers, diesel fuel systems, throttle body spacers, and more. aFe is passionate about providing the most compelling, innovative, and highest performing products that are designed, built and tested in the USA. aFe was founded in 1999 and has headquarters and manufacturing facilities in Corona, California, USA.

This item is 50-state legal D-550-22Learn More

AFE Sealed Intake (2011-2019 Dodge Charger V8-5.7L) - 54-72202

Momentum GT Cold Air Intake System w/ Pro 5R Media

Lethal Performance is proud to offer the entire line of AFE products!

advanced FLOW engineering (aFe Power) is a premier designer and manufacturer of automotive performance upgrade systems and components. Current product lines include cold air intake systems, high performance direct fit and racing air filters, exhaust systems, intercoolers, turbochargers, electronic programmers, diesel fuel systems, throttle body spacers, and more. aFe is passionate about providing the most compelling, innovative, and highest performing products that are designed, built and tested in the USA. aFe was founded in 1999 and has headquarters and manufacturing facilities in Corona, California, USA.

This item is 50-state legal D-550-22Learn More

DETAILS:

• Dyno-Proven Gains up to +13 HP and +14 Lbs. x Ft. TQ
• Outflows Factory Intake by 20%
• Measured Flow: 415 CFM @ 7” H2O
• Material is Red Cross-Link Polyethylene
• Innovative Filter-to-Housing Interface and Minimal Hardware for Fast & Easy Installation
• Built-In Sight Window Provides Easy Inspection of Filter Without Disassembly
• Washable and Reusable Pro DRY S Air Filter for Maximum Convenience
• No Cutting or Drilling on OEM Parts for Faster Installation

Large Three Layer Performance Air Filter:
This 9” tall 360-degree radial flow air filter features a 6-3/4” x 4-3/4” oval flange and our oil-free Pro DRY S media with three layers of synthetic media for maximum convenience. Its progressive layering provides great filtration efficiency and dust holding capacity, while not requiring the use of oils. This media is best suited for street and light off-road use.

Unique One-Piece Housing:
The smooth one-piece sealed housing, constructed of heat-resistant red XLPE (Cross-Linked polyethylene) polymer, features our patent-pending filter-to-housing interface. A large, clear sight window allows for hassle-free filter inspection, without having to disassemble your system. It accommodates the "Hellcat" headlight air inlet for 2015-2021 Dodge Challenger models only (P/N 54-72203-SR)

Dyno-Tuned Intake Tube:
This system features high quality, computer-designed, dyno-tuned intake tubes to achieve maximum power gains while maintaining a perfect fit. Their featured red XLPE material is heat-soak resistant and extremely durable.

Hassle-Free Installation:
This intake is designed to use factory mounting locations, minimizing the use of unnecessary hardware, ensuring a perfect fit every time. Its revolutionary design, featuring our patent pending filter-to-housing interface uses half the number of parts of a traditional cold air intake system.

Premium Components:
Premium stainless steel T-bolt clamps and a reinforce silicone couplings are used for strength and durability while also providing the most secure installation available. Momentum intakes are designed with fewer parts for a quick and simple installation.

Fitment Note:
For 2011-2014 Chrysler 300 V6-3.6L, Kit will not fit vehicle with factory HID headlights.

Emissions Disclaimer:
This product is not currently CARB exempt and is not available for purchase in California or for use on any vehicle registered with the California Department of Motor Vehicles.

Learn More

DETAILS:
+39 HP / +35 lbs. x ft. Torque max gains
Outflows factory intake by 11%
CAD-Designed Roto-Molded Intake Tube
Powder-Coated One Piece Heat-shield utilizes stock mounting locations
Pro DRY S oil-free 3-Layer Progressively Finer Porosity Synthetic Media for Maximum Convenience With Excellent
Filtration Efficiency w/ included Pre-filter
No Cutting or Drilling on OEM Parts for Faster Installation

Learn More

DETAILS:
+39 HP / +35 lbs. x ft. TQ max gains
Outflows factory intake by 33%
CAD-Designed Roto-Molded Intake Tube
Powder-Coated One Piece Heat-shield utilizes stock mounting locations
Pro 5R pre-oiled, washable/reusable air filter for maximum performance w/ included pre-filter
No cutting or drilling on OEM parts for faster installation

Learn More