GAINS 15-20 HORSEPOWER!
Extensive dyno-testing throughout the development of the intake kit ensures that it makes the most Horsepower possible. This stock 2019 Challenger SRT Hellcat, had gains ranging from 15-20 HP.

THE SOUND OF PERFORMANCE!
The huge air filter and tube produce a more aggressive sound than stock, with a noticeable increase in supercharger whine.

COLD AIR INDUCTION.
The JLT airbox isolates power-robbing engine heat by sealing to the stock hood scoop, using all the available air inlet locations. The box and tube's crosslink polyethylene material keeps the air cool as it flows to the engine.

HUGE TUBE AND FILTER.
The 5.75" x 7.75" oval inlet at the filter leads to unrestricted airflow to the 4.5" mouth at the supercharger, making it perfect for an upgraded throttle body. Learn More

GAINS 15-20 HORSEPOWER!
Extensive dyno-testing throughout the development of the intake kit ensures that it makes the most Horsepower possible. This stock 2019 Challenger SRT Hellcat, had gains ranging from 15-20 HP.

THE SOUND OF PERFORMANCE!
The huge air filter and tube produce a more aggressive sound than stock, with a noticeable increase in supercharger whine.

COLD AIR INDUCTION.
The JLT airbox isolates power-robbing engine heat by sealing to the stock hood scoop, using all the available air inlet locations. The box and tube's crosslink polyethylene material keeps the air cool as it flows to the engine.

HUGE TUBE AND FILTER.
The 5.75" x 7.75" oval inlet at the filter leads to unrestricted airflow to the 4.5" mouth at the supercharger, making it perfect for an upgraded throttle body. Learn More

KIT INCLUDES:
•JLT Plastic Intake Tube
•Silicone Reducer
•5x7 S&B powerstack Air Filter
•Roto molded Heat Shield
•JLT MAF adaptor plate
•JLT IAT adaptor plate
•JLT Charger Rain Shield
•JLT Challenger Rain Shield
•HD Clamps, all needed hardware

Learn More

Airaid Performance Air Intake System (2011-2022 300, Challenger, Charger, 300 S, 300 Base, 300 Touring, 300 Limited) - 354-317

The AIRAID MXP Air Intake System represents the ultimate in AIRAID's cold air induction systems and delivers higher levels of horsepower and acceleration gains for high-performance gas and diesel vehicles. Some AIRAID MXP Air Intakes start with a replacement one-piece roto-molded air box that addresses the shortcomings of the restrictive factory design. Housed inside the air box is an AIRAID premium air filter for outstanding air flow and filtration. Air is directed through a new air intake tube constructed of cross-linked, high-density polyethylene that is designed using extensive computer modeling to maintain proper mass air flow readings and calibration. Many MXP Air Intake Systems have a built-in velocity stack, which further promotes airflow. What this all means is that you get a simple-to-install, yet extremely sophisticated system to increase air flow while maintaining proper air-to-fuel ratios, thereby eliminating the need for recalibration after installation. Just bolt it on and go! Some AIRAID air intakes are not legal for sale or use in California and other states adopting California emission standards, while others are 50 state legal. View the product's vehicle applications to determine the legal status for each vehicle.

Learn More

Airaid Performance Air Intake System (2011-2022 Chrysler 300, Dodge Challenger, Dodge Charger) - 355-210

The AIRAID Cold Air Dam (CAD) Air Intake is engineered to give your engine larger amounts of cooler air to produce more horsepower and torque. The intake system retains the original location of the air filter but delivers a big boost with the addition of a huge open-element air inlet protected by Cold Air Dam panels that help to provide a steady, free-flowing supply of cooler outside air into your engine. The panels mount in the factory air box location and utilize any factory cold air inlet ducts that are present, while adding additional cold air passages to the filter. The panels also keep the filter isolated from the hot engine compartment air by sealing to the underside of the hood via blade-style weather stripping. This CAD system utilizes a replacement low-restriction intake tube. The 360-degree conical AIRAID premium air filter is washable and reusable, less restrictive than traditional paper, and assures superior filtration. The AIRAID Cold Air Dam Air Intake is easy to install with common hand tools. Some AIRAID air intakes are not legal for sale or use in California and other states adopting California emission standards, while others are 50 state legal. View the product's vehicle applications to determine the legal status for each vehicle.

Learn More

Airaid Performance Air Intake System (2011-2022 Chrysler 300, Dodge Challenger, Dodge Charger) - 354-210

The AIRAID Cold Air Dam (CAD) Air Intake is engineered to give your engine larger amounts of cooler air to produce more horsepower and torque. The intake system retains the original location of the air filter but delivers a big boost with the addition of a huge open-element air inlet protected by Cold Air Dam panels that help to provide a steady, free-flowing supply of cooler outside air into your engine. The panels mount in the factory air box location and utilize any factory cold air inlet ducts that are present, while adding additional cold air passages to the filter. The panels also keep the filter isolated from the hot engine compartment air by sealing to the underside of the hood via blade-style weather stripping. This CAD system utilizes a replacement low-restriction intake tube. The 360-degree conical AIRAID premium air filter is washable and reusable, less restrictive than traditional paper, and assures superior filtration. The AIRAID Cold Air Dam Air Intake is easy to install with common hand tools. Some AIRAID air intakes are not legal for sale or use in California and other states adopting California emission standards, while others are 50 state legal. View the product's vehicle applications to determine the legal status for each vehicle.

Learn More

DETAILS:
Dyno-Proven Gains up to +17 HP & +21 Lbs. x Ft. TQ (Tested on 2018 Challenger SRT Demon) Outflows Factory Intake by 20% Measured Flow: 855 CFM @ 7” H20 Open-Element Design Showcases the Air Filter and Delivers an Aggressive Air Intake Sound Housing Seals to Hood Scoop, Collecting Cool Outside Air Along w/ Headlight Air Inlet Washable and Reusable Pro DRY S Air Filter for Maximum Convenience Innovative Filter-to-Housing Interface for Easy Installation (Roughly 30 Minutes) Premium Stainless-Steel Clamps and Silicone Bellow Couplings Provide a Secure Seal Utilizes Factory Mounting Locations for an Easy and Secure Installation

Large Three Layer Performance Air Filter:
This 10” tall 360-degree radial flow air filter features our oil-free Pro DRY S media with three layers of synthetic media for maximum convenience. Its progressive layering provides great filtration efficiency and dust holding capacity, while not requiring the use of oils. This media is best suited for street use. This air filter was specially designed for the SRT Hellcat / SRT Demon / SRT Redeye.

Heat-Resistant Housing:
The included massive air filter is surrounded by an open-element XLPE (cross-linked polyethylene) polymer housing that minimizes warm engine air for maximum performance. Its open design allows for easy viewing of the massive air filter, yet seals to the hood to gather air from the factory hood scoop. The housing also connects to the factory headlight air inlet thanks to the scoop inlet provided.

Dyno-Tuned Intake Tube:
This system features a high quality, computer-designed, dyno-tuned intake tube to achieve maximum power gains while maintaining a perfect fit. Its XLPE material is heat soak resistant and extremely durable.

Premium Hardware:
This is a direct fit intake system that utilizes factory mounting points. All necessary clamps, a silicone bellows coupling, and all other hardware is included.

FCA Multi-Air Unit Actuator:
For the SRT Hellcat and SRT Hellcat Redeye, the factory MUA (Multi-Air Unit Actuator) is easily connected to the air intake tube. All clamps and hose are provided to guarantee correct crankcase flow, avoiding check engine lights and damaging factory hoses and sensors.

Emissions Disclaimer:
This product is not currently CARB exempt and is not available for purchase in California or for use on any vehicle registered with the California Department of Motor Vehicles.Learn More

DETAILS:
Dyno-Proven Gains up to +17 HP & +21 Lbs. x Ft. TQ (Tested on 2018 Challenger SRT Demon) Outflows Factory Intake by 20% Measured Flow: 855 CFM @ 7” H20 Open-Element Design Showcases the Air Filter and Delivers an Aggressive Air Intake Sound Housing Seals to Hood Scoop, Collecting Cool Outside Air Along w/ Headlight Air Inlet Washable and Reusable Pro DRY S Air Filter for Maximum Convenience Innovative Filter-to-Housing Interface for Easy Installation (Roughly 30 Minutes) Premium Stainless-Steel Clamps and Silicone Bellow Couplings Provide a Secure Seal Utilizes Factory Mounting Locations for an Easy and Secure Installation

Large Three Layer Performance Air Filter:
This 10” tall 360-degree radial flow air filter features our oil-free Pro DRY S media with three layers of synthetic media for maximum convenience. Its progressive layering provides great filtration efficiency and dust holding capacity, while not requiring the use of oils. This media is best suited for street use. This air filter was specially designed for the SRT Hellcat / SRT Demon / SRT Redeye.

Heat-Resistant Housing:
The included massive air filter is surrounded by an open-element XLPE (cross-linked polyethylene) polymer housing that minimizes warm engine air for maximum performance. Its open design allows for easy viewing of the massive air filter, yet seals to the hood to gather air from the factory hood scoop. The housing also connects to the factory headlight air inlet thanks to the scoop inlet provided.

Dyno-Tuned Intake Tube:
This system features a high quality, computer-designed, dyno-tuned intake tube to achieve maximum power gains while maintaining a perfect fit. Its XLPE material is heat soak resistant and extremely durable.

Premium Hardware:
This is a direct fit intake system that utilizes factory mounting points. All necessary clamps, a silicone bellows coupling, and all other hardware is included.

FCA Multi-Air Unit Actuator:
For the SRT Hellcat and SRT Hellcat Redeye, the factory MUA (Multi-Air Unit Actuator) is easily connected to the air intake tube. All clamps and hose are provided to guarantee correct crankcase flow, avoiding check engine lights and damaging factory hoses and sensors.

Emissions Disclaimer:
This product is not currently CARB exempt and is not available for purchase in California or for use on any vehicle registered with the California Department of Motor Vehicles.Learn More