Induction Kits & Filters
Induction Kits & Filters
Affirm Payments
Buy with monthly payments Get a real-time decision.
Learn More
FILTER BY

Currently Shopping by:

  1. Remove This Item Price: $0.00 - $999.99
Clear All
Manufacturer
  1. AFE
  2. Airaid
  3. BBK
  4. Corsa
  5. Flowmaster
  6. Holley
  7. JLT Performance
  8. K and N Filters
My Cart

You have no items in your shopping cart.

Grid List

Set Ascending Direction
Page:
  2. 1
  3. 2
  4. 3
  5. 4
  6. 5
  1. AFE Magnum FORCE Cold Air Intake System Rain Shield (2015-2021 Challenger, Charger) - 54-12808-B

    AFE Magnum FORCE Cold Air Intake System Rain Shield (2015-2021 Challenger, Charger) - 54-12808-B

    $37.00

    AFE Intake Cover (2015-2019 Dodge Charger V8-6.2L (sc)) - 54-12808-B

    Magnum FORCE Cold Air Intake System Rain Shield

    Lethal Performance is proud to offer the entire line of AFE products!

    advanced FLOW engineering (aFe Power) is a premier designer and manufacturer of automotive performance upgrade systems and components. Current product lines include cold air intake systems, high performance direct fit and racing air filters, exhaust systems, intercoolers, turbochargers, electronic programmers, diesel fuel systems, throttle body spacers, and more. aFe is passionate about providing the most compelling, innovative, and highest performing products that are designed, built and tested in the USA. aFe was founded in 1999 and has headquarters and manufacturing facilities in Corona, California, USA.

    This item does not require a CARB EO# Learn More
  2. AFE Intake Cover (2015-2019 Dodge Charger V8-6.2L (sc)) - 54-12808-C

    AFE Intake Cover (2015-2019 Dodge Charger V8-6.2L (sc)) - 54-12808-C

    $62.00

    AFE Intake Cover (2015-2019 Dodge Charger V8-6.2L (sc)) - 54-12808-C

    Magnum FORCE Cold Air Intake System Rain Shield

    Lethal Performance is proud to offer the entire line of AFE products!

    advanced FLOW engineering (aFe Power) is a premier designer and manufacturer of automotive performance upgrade systems and components. Current product lines include cold air intake systems, high performance direct fit and racing air filters, exhaust systems, intercoolers, turbochargers, electronic programmers, diesel fuel systems, throttle body spacers, and more. aFe is passionate about providing the most compelling, innovative, and highest performing products that are designed, built and tested in the USA. aFe was founded in 1999 and has headquarters and manufacturing facilities in Corona, California, USA.

    This item does not require a CARB EO# Learn More
  3. AFE Momentum GT Cold Air Intake System w/ Pro 5R Media (2011-2021 300, 300, Challenger, Charger) - 54-72201

    AFE Momentum GT Cold Air Intake System w/ Pro 5R Media (2011-2021 300, 300, Challenger, Charger) - 54-72201

    $442.00

    AFE Sealed Intake (2011-2019 Dodge Charger V6-3.6L) - 54-72201

    Momentum GT Cold Air Intake System w/ Pro 5R Media

    Lethal Performance is proud to offer the entire line of AFE products!

    advanced FLOW engineering (aFe Power) is a premier designer and manufacturer of automotive performance upgrade systems and components. Current product lines include cold air intake systems, high performance direct fit and racing air filters, exhaust systems, intercoolers, turbochargers, electronic programmers, diesel fuel systems, throttle body spacers, and more. aFe is passionate about providing the most compelling, innovative, and highest performing products that are designed, built and tested in the USA. aFe was founded in 1999 and has headquarters and manufacturing facilities in Corona, California, USA.

    This item is 50-state legal D-550-22Learn More
  4. AFE Momentum GT Cold Air Intake System w/ Pro 5R Media (2011-2021 300, 300, Challenger, Charger) - 54-72202

    AFE Momentum GT Cold Air Intake System w/ Pro 5R Media (2011-2021 300, 300, Challenger, Charger) - 54-72202

    $442.00

    AFE Sealed Intake (2011-2019 Dodge Charger V8-5.7L) - 54-72202

    Momentum GT Cold Air Intake System w/ Pro 5R Media

    Lethal Performance is proud to offer the entire line of AFE products!

    advanced FLOW engineering (aFe Power) is a premier designer and manufacturer of automotive performance upgrade systems and components. Current product lines include cold air intake systems, high performance direct fit and racing air filters, exhaust systems, intercoolers, turbochargers, electronic programmers, diesel fuel systems, throttle body spacers, and more. aFe is passionate about providing the most compelling, innovative, and highest performing products that are designed, built and tested in the USA. aFe was founded in 1999 and has headquarters and manufacturing facilities in Corona, California, USA.

    This item is 50-state legal D-550-22Learn More
  5. AFE Momentum GT Cold Air Intake System w/ Pro DRY S Media (2011-2021 300, 300, Challenger, Charger) - 51-72202

    AFE Momentum GT Cold Air Intake System w/ Pro DRY S Media (2011-2021 300, 300, Challenger, Charger) - 51-72202

    $442.00

    AFE Sealed Intake (2011-2019 Dodge Charger V8-5.7L) - 51-72202

    Momentum GT Cold Air Intake System w/ Pro DRY S Media

    Lethal Performance is proud to offer the entire line of AFE products!

    advanced FLOW engineering (aFe Power) is a premier designer and manufacturer of automotive performance upgrade systems and components. Current product lines include cold air intake systems, high performance direct fit and racing air filters, exhaust systems, intercoolers, turbochargers, electronic programmers, diesel fuel systems, throttle body spacers, and more. aFe is passionate about providing the most compelling, innovative, and highest performing products that are designed, built and tested in the USA. aFe was founded in 1999 and has headquarters and manufacturing facilities in Corona, California, USA.

    This item is 50-state legal D-550-22Learn More
  6. Holley Gen III Hemi Hi-Ram EFI Manifold Base (2009-2020 5.7L, 2005-2010 6.1L, 2011-2020 6.4L HEMI) - 300-653

    Holley Gen III Hemi Hi-Ram EFI Manifold Base (2009-2020 5.7L, 2005-2010 6.1L, 2011-2020 6.4L HEMI) - 300-653

    $744.95

    Add even more power to your Gen III Hemi engine with a Holley Hi-Ram intake manifold. This cast intake manifold has large intake ports - fits 2009-up 5.7L, 2005-2010 6.1L & 2011-up 6.4L engines. The Holley Hi-Ram intake manifold is for high-performance applications where induction system height is not limited. Using this Hi-Ram intake with high flowing Gen III Hemi cylinder heads has outstanding potential for naturally aspirated & forced induction applications. Aggressive, bold, race-bred styling will make bad intentions clear for drag race, muscle car, marine, off-road, sandrails, pulling trucks, track, street-rod applications and more! The base is designed to be modular in configuration to accept a wide range of EFI tops and to be attractive to builders and fabricators as the foundation for custom induction systems. Runner length and the tapered cross-section designed to perform well for a wide range of engine configurations. The EFI fuel rails are machined for -8AN O-ring fittings with passages large enough to accommodate high fuel flow and dampen pressure pulsations in the fuel system and come standard with EFI Hi-Ram kits. Intended for use on naturally aspirated, forced induction, or nitrous engines in the 5.7 to 7.2+ liter range, max power at 7500-8500 RPM. Features: Add Even More Power to the Gen III Hemi Engine with a Holley Hi-Ram Intake Manifold Fits Gen III Hemi Engines w/ Large Intake Ports (1.70” Height x 1.88” Wide) – fits 2009-up 5.7L, 2005-2010 6.1L, 2011-up 6.4L) Cast Aluminum Construction w/ Natural Satin or Black Ceramic Finish• Cast Aluminum Construction w/ Natural Satin or Black Ceramic Finish Runner Length and the Tapered Cross Section Designed to Perform Well for a Wide Range of Engine Configurations Includes EFI Fuel Rails w/ -8 AN O-Ring Fittings & Large Passages to Accommodate High Fuel Flow and Dampen Pressure Pulsations in the Fuel System Works with Gen III Hemi Injectors & Bosch EV-1 Style Injectors O-Ring Seal to Head – Large Retained O-rings Offer Superior Original Equipment (OE) Style Sealing & Are Easy to Replace Billet Oil Fill Cap – Attractive Low Profile Design Positive Crankcase Ventilation (PVC) Ports w/ Adapter Fittings Overall Height: 11.59” Port for OE Style Manifold Absolute Pressure (MAP) Sensor (1 or 2 Bar) Cast-In Pads for Adding Nitrous Nozzles Manifold Base – Available Separately for Custom Induction SystemsLearn More
  7. Holley Intake Manifold Adapter Plates (2003-2008 Gen III HEMI 5.7L) - 300-652

    Holley Intake Manifold Adapter Plates (2003-2008 Gen III HEMI 5.7L) - 300-652

    $317.95

    Add even more power to your Gen III Hemi engine with a Holley Hi-Ram intake manifold. This cast intake manifold has large intake ports - fits 2009-up 5.7L, 2005-2010 6.1L & 2011-up 6.4L engines. The Holley Hi-Ram intake manifold is for high-performance applications where induction system height is not limited. Using this Hi-Ram intake with high flowing Gen III Hemi cylinder heads has outstanding potential for naturally aspirated & forced induction applications. Aggressive, bold, race-bred styling will make bad intentions clear for drag race, muscle car, marine, off-road, sandrails, pulling trucks, track, street-rod applications and more! The base is designed to be modular in configuration to accept a wide range of EFI tops and to be attractive to builders and fabricators as the foundation for custom induction systems. Runner length and the tapered cross-section designed to perform well for a wide range of engine configurations. The EFI fuel rails are machined for -8AN O-ring fittings with passages large enough to accommodate high fuel flow and dampen pressure pulsations in the fuel system and come standard with EFI Hi-Ram kits. Intended for use on naturally aspirated, forced induction, or nitrous engines in the 5.7 to 7.2+ liter range, max power at 7500-8500 RPM. Features: Add Even More Power to the Gen III Hemi Engine with a Holley Hi-Ram Intake Manifold Fits Gen III Hemi Engines w/ Large Intake Ports (1.70” Height x 1.88” Wide) – fits 2009-up 5.7L, 2005-2010 6.1L, 2011-up 6.4L) Cast Aluminum Construction w/ Natural Satin or Black Ceramic Finish• Cast Aluminum Construction w/ Natural Satin or Black Ceramic Finish Runner Length and the Tapered Cross Section Designed to Perform Well for a Wide Range of Engine Configurations Includes EFI Fuel Rails w/ -8 AN O-Ring Fittings & Large Passages to Accommodate High Fuel Flow and Dampen Pressure Pulsations in the Fuel System Works with Gen III Hemi Injectors & Bosch EV-1 Style Injectors O-Ring Seal to Head – Large Retained O-rings Offer Superior Original Equipment (OE) Style Sealing & Are Easy to Replace Billet Oil Fill Cap – Attractive Low Profile Design Positive Crankcase Ventilation (PVC) Ports w/ Adapter Fittings Overall Height: 11.59” Port for OE Style Manifold Absolute Pressure (MAP) Sensor (1 or 2 Bar) Cast-In Pads for Adding Nitrous Nozzles Manifold Base – Available Separately for Custom Induction SystemsLearn More
  8. Holley Throttle Body Adapter Plate - 95mm GM LS Throttle Body Intake Flange to 80mm Mopar Gen III Hemi Throttle Body - 300-660

    Holley Throttle Body Adapter Plate - 95mm GM LS Throttle Body Intake Flange to 80mm Mopar Gen III Hemi Throttle Body - 300-660

    $71.70

    Add even more power to your Gen III Hemi engine with a Holley Hi-Ram intake manifold. This cast intake manifold has large intake ports - fits 2009-up 5.7L, 2005-2010 6.1L & 2011-up 6.4L engines. The Holley Hi-Ram intake manifold is for high-performance applications where induction system height is not limited. Using this Hi-Ram intake with high flowing Gen III Hemi cylinder heads has outstanding potential for naturally aspirated & forced induction applications. Aggressive, bold, race-bred styling will make bad intentions clear for drag race, muscle car, marine, off-road, sandrails, pulling trucks, track, street-rod applications and more! The base is designed to be modular in configuration to accept a wide range of EFI tops and to be attractive to builders and fabricators as the foundation for custom induction systems. Runner length and the tapered cross-section designed to perform well for a wide range of engine configurations. The EFI fuel rails are machined for -8AN O-ring fittings with passages large enough to accommodate high fuel flow and dampen pressure pulsations in the fuel system and come standard with EFI Hi-Ram kits. Intended for use on naturally aspirated, forced induction, or nitrous engines in the 5.7 to 7.2+ liter range, max power at 7500-8500 RPM. Features: Add Even More Power to the Gen III Hemi Engine with a Holley Hi-Ram Intake Manifold Fits Gen III Hemi Engines w/ Large Intake Ports (1.70” Height x 1.88” Wide) – fits 2009-up 5.7L, 2005-2010 6.1L, 2011-up 6.4L) Cast Aluminum Construction w/ Natural Satin or Black Ceramic Finish• Cast Aluminum Construction w/ Natural Satin or Black Ceramic Finish Runner Length and the Tapered Cross Section Designed to Perform Well for a Wide Range of Engine Configurations Includes EFI Fuel Rails w/ -8 AN O-Ring Fittings & Large Passages to Accommodate High Fuel Flow and Dampen Pressure Pulsations in the Fuel System Works with Gen III Hemi Injectors & Bosch EV-1 Style Injectors O-Ring Seal to Head – Large Retained O-rings Offer Superior Original Equipment (OE) Style Sealing & Are Easy to Replace Billet Oil Fill Cap – Attractive Low Profile Design Positive Crankcase Ventilation (PVC) Ports w/ Adapter Fittings Overall Height: 11.59” Port for OE Style Manifold Absolute Pressure (MAP) Sensor (1 or 2 Bar) Cast-In Pads for Adding Nitrous Nozzles Manifold Base – Available Separately for Custom Induction SystemsLearn More
  9. Holley Throttle Body Adapter Plate - 95mm GM LS Throttle Body Intake Flange to 92mm Mopar Hellcat Gen III HEMI Throttle Body - 300-660

    Holley Throttle Body Adapter Plate - 95mm GM LS Throttle Body Intake Flange to 92mm Mopar Hellcat Gen III HEMI Throttle Body - 300-660

    $50.19

    Out of stock

    Add even more power to your Gen III Hemi engine with a Holley Hi-Ram intake manifold. This cast intake manifold has large intake ports - fits 2009-up 5.7L, 2005-2010 6.1L & 2011-up 6.4L engines. The Holley Hi-Ram intake manifold is for high-performance applications where induction system height is not limited. Using this Hi-Ram intake with high flowing Gen III Hemi cylinder heads has outstanding potential for naturally aspirated & forced induction applications. Aggressive, bold, race-bred styling will make bad intentions clear for drag race, muscle car, marine, off-road, sandrails, pulling trucks, track, street-rod applications and more! The base is designed to be modular in configuration to accept a wide range of EFI tops and to be attractive to builders and fabricators as the foundation for custom induction systems. Runner length and the tapered cross-section designed to perform well for a wide range of engine configurations. The EFI fuel rails are machined for -8AN O-ring fittings with passages large enough to accommodate high fuel flow and dampen pressure pulsations in the fuel system and come standard with EFI Hi-Ram kits. Intended for use on naturally aspirated, forced induction, or nitrous engines in the 5.7 to 7.2+ liter range, max power at 7500-8500 RPM. Features: Add Even More Power to the Gen III Hemi Engine with a Holley Hi-Ram Intake Manifold Fits Gen III Hemi Engines w/ Large Intake Ports (1.70” Height x 1.88” Wide) – fits 2009-up 5.7L, 2005-2010 6.1L, 2011-up 6.4L) Cast Aluminum Construction w/ Natural Satin or Black Ceramic Finish• Cast Aluminum Construction w/ Natural Satin or Black Ceramic Finish Runner Length and the Tapered Cross Section Designed to Perform Well for a Wide Range of Engine Configurations Includes EFI Fuel Rails w/ -8 AN O-Ring Fittings & Large Passages to Accommodate High Fuel Flow and Dampen Pressure Pulsations in the Fuel System Works with Gen III Hemi Injectors & Bosch EV-1 Style Injectors O-Ring Seal to Head – Large Retained O-rings Offer Superior Original Equipment (OE) Style Sealing & Are Easy to Replace Billet Oil Fill Cap – Attractive Low Profile Design Positive Crankcase Ventilation (PVC) Ports w/ Adapter Fittings Overall Height: 11.59” Port for OE Style Manifold Absolute Pressure (MAP) Sensor (1 or 2 Bar) Cast-In Pads for Adding Nitrous Nozzles Manifold Base – Available Separately for Custom Induction SystemsLearn More

Grid List

Set Ascending Direction
Page:
  2. 1
  3. 2
  4. 3
  5. 4
  6. 5
Recently viewed products

video title

video content