Add even more power to your Gen III Hemi engine with a Holley Hi-Ram intake manifold. This cast intake manifold has large intake ports - fits 2009-up 5.7L, 2005-2010 6.1L & 2011-up 6.4L engines. The Holley Hi-Ram intake manifold is for high-performance applications where induction system height is not limited. Using this Hi-Ram intake with high flowing Gen III Hemi cylinder heads has outstanding potential for naturally aspirated & forced induction applications. Aggressive, bold, race-bred styling will make bad intentions clear for drag race, muscle car, marine, off-road, sandrails, pulling trucks, track, street-rod applications and more! The base is designed to be modular in configuration to accept a wide range of EFI tops and to be attractive to builders and fabricators as the foundation for custom induction systems. Runner length and the tapered cross-section designed to perform well for a wide range of engine configurations. The EFI fuel rails are machined for -8AN O-ring fittings with passages large enough to accommodate high fuel flow and dampen pressure pulsations in the fuel system and come standard with EFI Hi-Ram kits. Intended for use on naturally aspirated, forced induction, or nitrous engines in the 5.7 to 7.2+ liter range, max power at 7500-8500 RPM. Features: Add Even More Power to the Gen III Hemi Engine with a Holley Hi-Ram Intake Manifold Fits Gen III Hemi Engines w/ Large Intake Ports (1.70” Height x 1.88” Wide) – fits 2009-up 5.7L, 2005-2010 6.1L, 2011-up 6.4L) Cast Aluminum Construction w/ Natural Satin or Black Ceramic Finish• Cast Aluminum Construction w/ Natural Satin or Black Ceramic Finish Runner Length and the Tapered Cross Section Designed to Perform Well for a Wide Range of Engine Configurations Includes EFI Fuel Rails w/ -8 AN O-Ring Fittings & Large Passages to Accommodate High Fuel Flow and Dampen Pressure Pulsations in the Fuel System Works with Gen III Hemi Injectors & Bosch EV-1 Style Injectors O-Ring Seal to Head – Large Retained O-rings Offer Superior Original Equipment (OE) Style Sealing & Are Easy to Replace Billet Oil Fill Cap – Attractive Low Profile Design Positive Crankcase Ventilation (PVC) Ports w/ Adapter Fittings Overall Height: 11.59” Port for OE Style Manifold Absolute Pressure (MAP) Sensor (1 or 2 Bar) Cast-In Pads for Adding Nitrous Nozzles Manifold Base – Available Separately for Custom Induction SystemsLearn More

Add even more power to your Gen III Hemi engine with a Holley Hi-Ram intake manifold. This cast intake manifold has large intake ports - fits 2009-up 5.7L, 2005-2010 6.1L & 2011-up 6.4L engines. The Holley Hi-Ram intake manifold is for high-performance applications where induction system height is not limited. Using this Hi-Ram intake with high flowing Gen III Hemi cylinder heads has outstanding potential for naturally aspirated & forced induction applications. Aggressive, bold, race-bred styling will make bad intentions clear for drag race, muscle car, marine, off-road, sandrails, pulling trucks, track, street-rod applications and more! The base is designed to be modular in configuration to accept a wide range of EFI tops and to be attractive to builders and fabricators as the foundation for custom induction systems. Runner length and the tapered cross-section designed to perform well for a wide range of engine configurations. The EFI fuel rails are machined for -8AN O-ring fittings with passages large enough to accommodate high fuel flow and dampen pressure pulsations in the fuel system and come standard with EFI Hi-Ram kits. Intended for use on naturally aspirated, forced induction, or nitrous engines in the 5.7 to 7.2+ liter range, max power at 7500-8500 RPM. Features: Add Even More Power to the Gen III Hemi Engine with a Holley Hi-Ram Intake Manifold Fits Gen III Hemi Engines w/ Large Intake Ports (1.70” Height x 1.88” Wide) – fits 2009-up 5.7L, 2005-2010 6.1L, 2011-up 6.4L) Cast Aluminum Construction w/ Natural Satin or Black Ceramic Finish• Cast Aluminum Construction w/ Natural Satin or Black Ceramic Finish Runner Length and the Tapered Cross Section Designed to Perform Well for a Wide Range of Engine Configurations Includes EFI Fuel Rails w/ -8 AN O-Ring Fittings & Large Passages to Accommodate High Fuel Flow and Dampen Pressure Pulsations in the Fuel System Works with Gen III Hemi Injectors & Bosch EV-1 Style Injectors O-Ring Seal to Head – Large Retained O-rings Offer Superior Original Equipment (OE) Style Sealing & Are Easy to Replace Billet Oil Fill Cap – Attractive Low Profile Design Positive Crankcase Ventilation (PVC) Ports w/ Adapter Fittings Overall Height: 11.59” Port for OE Style Manifold Absolute Pressure (MAP) Sensor (1 or 2 Bar) Cast-In Pads for Adding Nitrous Nozzles Manifold Base – Available Separately for Custom Induction SystemsLearn More

650 CFM Rating @ 7" Hâ‚‚O - Outflows Factory Intake by 13%
+37 HP / +33 lbs. x ft. Torque max gains (Tested w/Pro 5R Air Filter Media)
Lightweight High Gloss, Clear-Coated 100% Plain Weave Carbon Fiber Housing and Tube
Incorporates Factory Headlamp Air Inlet - No Tuning Required
Includes Both Pro DRY S Oil-Free & Pro 5R Oiled, Washable/Reusable Performance Air Filters

Learn More

AFE Sealed Intake (2011-2019 Dodge Charger V8-6.4L) - 58-10003R

Black Series Carbon Fiber Cold Air Intake System w/ Pro 5R Media

Lethal Performance is proud to offer the entire line of AFE products!

advanced FLOW engineering (aFe Power) is a premier designer and manufacturer of automotive performance upgrade systems and components. Current product lines include cold air intake systems, high performance direct fit and racing air filters, exhaust systems, intercoolers, turbochargers, electronic programmers, diesel fuel systems, throttle body spacers, and more. aFe is passionate about providing the most compelling, innovative, and highest performing products that are designed, built and tested in the USA. aFe was founded in 1999 and has headquarters and manufacturing facilities in Corona, California, USA.

This item is not CARB exempt and is not legal to purchase in California Learn More

DETAILS:
New for 2017-2019 is the fully carbon fiber version of the popular Hellcat Momentum GT Cold Air Intake Kit. Lightweight high gloss clear-coated plain weave carbon fiber tube and housing ensures strength and rigidity with looks that kill. Same easy installation, more air flow, horsepower and torque in a full dry carbon application. All aFe POWER Black Series Intakes come with a serialized plate to assure the authenticity. Set your Hellcat different from the rest.

650 CFM Rating @ 7" Hâ‚‚O - Outflows Factory Intake by 13%
+27 HP / +24 lbs. x ft. Torque max gains (Tested w/Pro 5R Air Filter Media)
Lightweight High Gloss, Clear-Coated 100% Plain Weave Carbon Fiber Housing and Tube
Incorporates Factory Headlamp Air Inlet - No Tuning Required
Includes Both Pro DRY S Oil-Free & Pro 5R Oiled, Washable/Reusable Performance Air Filters

Learn More