DETAILS
The Edelbrock E-Force Supercharger Stage 1 Street System part # 15710 for 2014-19 Corvette Stingray increases the performance of your LT1 engine to 624 horsepower and 600 ft/lbs. of torque to the crank. The core of this system is the Eaton Gen VI 2300 TVS Supercharger rotating assembly with a four lobe design with 160 degrees of twist for maximum flow, minimum temperature rise and quiet operation for excellent drivability. We also designed our superchargers with an integrated bypass valve to help eliminate parasitic loss under light throttle, improving mileage potential. Our unique and efficient inlet configuration results in a shorter, less restrictive intake path for improved air flow, without the need for a jack-shaft. Keeping the air cool is a high capacity air to water intercooler and low temp heat exchanger. HANDHELD PROGRAMMER NOT INCLUDED. Supercharger systems sold without tuners are only emissions legal when used with the correct Edelbrock program, which can be downloaded at www.edelbrock.com. For safety, the Edelbrock supplied program will retain the factory vehicle speed limiter setting.

SPECS
Availability Available
System Type Stage 1 - Street System
Housing Material Cast Aluminum
Gasket Or Seal Included Yes
Mounting Hardware Included Yes
Quantity Kit
Oil Capacity 150 mL
Center Housing Cooling Type Intercooler
Internal Step Up Yes
Mounting Bracket Included Yes
Outside Pulley Diameter 3.5 in
CARB Executive Order Number D-215-103
Application Application Specific
UPC 00085347998050
Availability Note Available to Order
Warranty 36 Months
Emissions Code EO Number: D-215-89
Hazardous Materials Warning WARNING: This product can expose you to Chrome, which is known to the State of California to cause cancer or birth defects or other reproductive harm. For more information, visit www.P65warnings.ca.gov.
Installation Notes
Chevrolet Corvette 2014-2019
Finish Black Powder Coated
Maximum Boost Pressure 8
Maximum Pressure Reading 8
Pulley Belt Width 10-Rib
Universal Or Specific Fit Specific
Learn More

DETAILS
The Edelbrock E-Force Supercharger Stage 2 Track System part # 15701 for 2014-19 Chevy Corvette Stingray Z51 LT1 increases the performance of your LT1 engine to 537 horsepower and 527 ft/lbs. of torque to the rear wheels. The core of this system is the Eaton Gen VI 2300 TVS Supercharger rotating assembly with a four lobe design with 160 degrees of twist for maximum flow, minimum temperature rise and quiet operation for excellent drivability. We also designed our superchargers with an integrated bypass valve to help eliminate parasitic loss under light throttle, improving mileage potential. Our unique and efficient inlet configuration results in a shorter, less restrictive intake path for improved air flow, without the need for a jack-shaft. Keeping the air cool is a high capacity air to water intercooler and low temp heat exchanger. The Edelbrock #15701 system is emissions legal and provide the best combination for your daily driver. The supplied tune is intended for completely stock vehicles with the exception of a cat-back exhaust. This kit will include a tune for 91 or 93 octane fuels.

SPECS
Availability Available
System Type Stage 2 - Track System
Housing Material Cast Aluminum
Gasket Or Seal Included Yes
Mounting Hardware Included Yes
Quantity Kit
Oil Capacity 150 mL
Center Housing Cooling Type Intercooler
Internal Step Up Yes
Mounting Bracket Included Yes
Outside Pulley Diameter 3.25 in
CARB Executive Order Number D-215-103
Maximum Torque 527RW (With 91 Octane); 534RW (With 93 Octane) ft-lb
Maximum Horsepower 536RW (With 91 Octane); 551RW (With 93 Octane)
Application Application Specific
UPC 00085347157013
Availability Note Available to Order
Warranty 36 Months
Emissions Code EO Number: D-215-89
Hazardous Materials Warning WARNING: This product can expose you to Chrome, which is known to the State of California to cause cancer or birth defects or other reproductive harm. For more information, visit www.P65warnings.ca.gov.
Installation Notes
Chevrolet Corvette 2014-2019
Finish Black Powder Coated
Maximum Boost Pressure 7.5 PSI
Maximum Pressure Reading 7.5 PSI
Pulley Belt Width 10-Rib
Universal Or Specific Fit Specific
Learn More

The next step in compressor development, featuring an all-new, all-billet gearcase, and incorporating a technologically advanced, high-efficiency, 5-Axis machined billet impeller and high-diffusion housing developed in our SAE-J1723-compliant supercharger test cell.

The V-15 Z-Trim Supercharger was specifically designed to fit in the C5, C6, & C7 Corvette. It combines the advanced technology and race-proven performance that you have come to expect from Vortech, and applies it to address the ever growing horsepower demands of the Corvette Enthusiast. The Z-Trim compressor stage is named after Zora Arkus-Duntov, Belgian-Born American Engineer who earned the nickname "The Father of the Corvette".

Learn More

DETAILS
The Edelbrock E-Force Supercharger Stage 2 Track System part # 157320 is for use with 2015-19 Chevy Corvette Z06 LT4 engine applications. The core of this system is the Eaton Gen VI 2300 TVS Supercharger rotating assembly with a four lobe design with 160 degrees of twist for maximum flow, minimum temperature rise and quiet operation for excellent drivability. We also designed our superchargers with an integrated bypass valve to help eliminate parasitic loss under light throttle, improving mileage potential. Our unique and efficient inlet configuration results in a shorter, less restrictive intake path for improved air flow, without the need for a jack-shaft. Keeping the air cool is a high capacity air to water intercooler and low temp heat exchanger. This kit DOES NOT INCLUDE A TUNE, A CUSTOM TUNE MUST BE USED, NOT AVAILABLE THROUGH EDELBROCK. Finally... the Edelbrock E-Force Supercharger system is not just a performance upgrade, it also has great looks! The supercharger assembly and aluminum coil covers (on most applications) are powder coated for durability and provide a unique appearance that will give any engine compartment a custom look.

SPECS
Availability Available
System Type Stage 3 - Pro-Tuner System
Housing Material Cast Aluminum
Gasket Or Seal Included Yes
Mounting Hardware Included Yes
Quantity Kit
Oil Capacity 150 mL
Center Housing Cooling Type Intercooler
Internal Step Up Yes
Mounting Bracket Included Yes
CARB Executive Order Number D-215-90
Application Application Specific
UPC 00085347998586
Availability Note Available to Order
Warranty 36 Months
Emissions Code
Hazardous Materials Warning WARNING: This product can expose you to Chrome, which is known to the State of California to cause cancer or birth defects or other reproductive harm. For more information, visit www.P65warnings.ca.gov.
Installation Notes
Chevrolet Corvette 2015-2019
Finish Black Powder Coated
Pulley Belt Width 10.0 in
Universal Or Specific Fit Specific
Learn More

DETAILS
The Edelbrock E-Force Supercharger Stage 3 Pro-Tuner system part # 15702 is designed for use with 2014-19 Chevy Corvette Stingray Z51 applications with the LT1 engine. The Edelbrock E-Force competition supercharger is based off of our street supercharger kit but is paired down to the essential components that a racer needs, without the extras that experienced racers prefer to customize for their own competitive advantage. Featuring a unique design with minimal components and fits under the stock hood. The core of this system is the Eaton Gen VI 2300 TVS Supercharger rotating assembly with a four lobe design with 160 degrees of twist for maximum flow, minimum temperature rise and quiet operation for excellent drivability. We also designed our superchargers with an integrated bypass valve to help eliminate parasitic loss under light throttle, improving mileage potential. Our unique and efficient inlet configuration results in a shorter, less restrictive intake path for improved air flow, without the need for a jack-shaft. This system requires the use of a universal heat exchanger (sold separately). Our #15702 Tuner system includes all of the essential components that a racer would need to build a custom supercharged racing setup. This system offers flexibility in pulley selection, cold air intake and more. These systems are for competition racing use only. This kit DOES NOT INCLUDE A TUNE, A CUSTOM TUNE MUST BE USED, NOT AVAILABLE THROUGH EDELBROCK. Finally... the Edelbrock E-Force Supercharger system is not just a performance upgrade, it also has great looks! The supercharger assembly and aluminum coil covers (on most applications) are powder coated for durability and provide a unique appearance that will give any engine compartment a custom look.

SPECS
Availability Available
System Type Stage 3 - Pro-Tuner System
Housing Material Cast Aluminum
Gasket Or Seal Included Yes
Mounting Hardware Included Yes
Quantity Kit
Oil Capacity 150 mL
Center Housing Cooling Type Intercooler
Internal Step Up Yes
Mounting Bracket Included Yes
Application Application Specific
UPC 00085347157020
Availability Note Available to Order
Warranty 36 Months
Emissions Code
Hazardous Materials Warning WARNING: This product can expose you to Chrome, which is known to the State of California to cause cancer or birth defects or other reproductive harm. For more information, visit www.P65warnings.ca.gov.
Installation Notes
Chevrolet Corvette 2014-2019
Finish Black Powder Coated
Universal Or Specific Fit Specific
Learn More

DETAILS
Edelbrock part # 15815 is a 15% overdrive crank pulley is for use with a 2014-19 Corvette Stingray with an Edelbrock E-Force Supercharger system installed. It features an 8.7" diameter 10-rib secondary and stock diameter primary drive that delivers maximum traction and stability in supercharged applications. It’s an ideal solution when a smaller pulley is not an option.

SPECS
Availability Available
Recommended Use For E-Force Supercharger Systems
Mounting Hole Quantity 3
Mounting Hole Diameter 10 mm
Quantity Sold Individually
Pulley Groove Quantity 10-Rib
Belt Type Serpentine (Not Included)
Application Application Specific
UPC 00085347158157
Availability Note Available to Order
Warranty 12 Months
Emissions Code
Hazardous Materials Warning WARNING: This product can expose you to Chrome, which is known to the State of California to cause cancer or birth defects or other reproductive harm. For more information, visit www.P65warnings.ca.gov.
Installation Notes
Chevrolet Corvette 2019-2014
Finish Black Anodized
Inside Diameter 7.48 in
Material Aluminum
Outside Diameter 8.7 in
Width 8.706 in
Learn More

DETAILS
Edelbrock part # 41124 aluminum coil covers are designed for 2014-15 Corvette with an E-Force Supercharger. Our kit is geared towards those with competition versions of the supercharger kits, which do not include coil covers, but would like to add them. Covers are designed to fit around the supercharger unit and will not fit naturally aspirated motors.

SPECS
Availability Available
Mounting Hardware Included Yes
Quantity Kit
Attachment Type Bolt-On
Application Application Specific
UPC 00085347411245
Availability Note Available to Order
Warranty 12 Months
Hazardous Materials Warning WARNING: This product can expose you to Chrome, which is known to the State of California to cause cancer or birth defects or other reproductive harm. For more information, visit www.P65warnings.ca.gov.
Installation Notes
Depending on your application, there will be two different factory valve cover bushings: a 5/8
Finish Black And Red Textured Powder Coated
Material Cast Aluminum
Universal Or Specific Fit Specific
Learn More

DETAILS
Edelbrock Part # 15709 replacement damper is for use with 2014-15 C7 Corvette Stingrays equipped with an E-Force supercharger system. This is the same damper that are supplied with all E-Force Corvette Stingray Supercharger systems. Damper #15709 can also be used to convert a wet sump oil system to a dry sump system. Includes damper and bolt.

SPECS
Availability Available
Mounting Hole Quantity 3
Grade Type Performance
Mounting Hole Diameter 1.615 in
Quantity Sold Individually
Keyway Type Single; 3/16
Drive Belt Type Serpentine (Not Included)
Bolt And Washer Included Yes
Center Bolt Length 5.75
Center Bolt Thread Type 2.0 mm
Application Application Specific
UPC 00085347157099
Availability Note Available to Order
Warranty 12 Months
Hazardous Materials Warning WARNING: This product can expose you to Chrome, which is known to the State of California to cause cancer or birth defects or other reproductive harm. For more information, visit www.P65warnings.ca.gov.
Installation Notes
Proper installation is the responsibility of the installer. Improper installation will void your warranty and may result in poor performance and engine or vehicle damage.
Depth 2.783 in
Finish Black Powder Coated
Inside Diameter 1.615 in
Material Steel
Outside Diameter 6.800 in
Learn More