Superchargers
Superchargers
Affirm Payments
Buy with monthly payments Get a real-time decision.
Learn More
FILTER BY
Manufacturer
  1. ECS
  2. Edelbrock
  3. Magnuson Superchargers
  4. Procharger
  5. Vortech Superchargers
Price
  1. $0.00 - $9,999.99
  2. $10,000.00 and above
My Cart

You have no items in your shopping cart.

Grid List

Set Ascending Direction
Page:
  1. 1
  2. 2
  3. 3
  4. 4
  5. 5
  1. Edelbrock 15701 E-Force Supercharger for 2014-19 Corvette Stingray LT1 - Stage 2

    Edelbrock 15701 E-Force Supercharger for 2014-19 Corvette Stingray LT1 - Stage 2

    $9,766.87

    DETAILS
    The Edelbrock E-Force Supercharger Stage 2 Track System part # 15701 for 2014-19 Chevy Corvette Stingray Z51 LT1 increases the performance of your LT1 engine to 537 horsepower and 527 ft/lbs. of torque to the rear wheels. The core of this system is the Eaton Gen VI 2300 TVS Supercharger rotating assembly with a four lobe design with 160 degrees of twist for maximum flow, minimum temperature rise and quiet operation for excellent drivability. We also designed our superchargers with an integrated bypass valve to help eliminate parasitic loss under light throttle, improving mileage potential. Our unique and efficient inlet configuration results in a shorter, less restrictive intake path for improved air flow, without the need for a jack-shaft. Keeping the air cool is a high capacity air to water intercooler and low temp heat exchanger. The Edelbrock #15701 system is emissions legal and provide the best combination for your daily driver. The supplied tune is intended for completely stock vehicles with the exception of a cat-back exhaust. This kit will include a tune for 91 or 93 octane fuels.

    SPECS
    Availability Available
    System Type Stage 2 - Track System
    Housing Material Cast Aluminum
    Gasket Or Seal Included Yes
    Mounting Hardware Included Yes
    Quantity Kit
    Oil Capacity 150 mL
    Center Housing Cooling Type Intercooler
    Internal Step Up Yes
    Mounting Bracket Included Yes
    Outside Pulley Diameter 3.25 in
    CARB Executive Order Number D-215-103
    Maximum Torque 527RW (With 91 Octane); 534RW (With 93 Octane) ft-lb
    Maximum Horsepower 536RW (With 91 Octane); 551RW (With 93 Octane)
    Application Application Specific
    UPC 00085347157013
    Availability Note Available to Order
    Warranty 36 Months
    Emissions Code EO Number: D-215-89
    Hazardous Materials Warning WARNING: This product can expose you to Chrome, which is known to the State of California to cause cancer or birth defects or other reproductive harm. For more information, visit www.P65warnings.ca.gov.
    Installation Notes
    Chevrolet Corvette 2014-2019
    Finish Black Powder Coated
    Maximum Boost Pressure 7.5 PSI
    Maximum Pressure Reading 7.5 PSI
    Pulley Belt Width 10-Rib
    Universal Or Specific Fit Specific
    Learn More
  2. ProCharger Pro Race Tuner Kit with F-1 (2014-2019 Corvette C7) - 1GU502-F1

    ProCharger Pro Race Tuner Kit with F-1 (2014-2019 Corvette C7) - 1GU502-F1

    $12,499.00

    ProCharger Pro Race Tuner Kit with F-1 (2014-2019 Corvette C7) - 1GU502-F1

    THE FASTEST C7 CORVETTES RUN PROCHARGER!
    Building on a 25-year history of forced induction engineering and innovation, ProCharger was the first supercharger manufacturer to design and release a highly efficient air-to-air intercooled supercharger system for the C7 Corvette Stingray. With an original bracket design and belt-drive system unique to the C7 Stingray platform, ProCharger P-1SC-1 intercooled systems and tuner kits continue to lead the industry in OEM-style fit and finish, ease of installation, and reliable performance.

    Our C7 Corvette Stingray HO Intercooled Systems with P-1SC-1 are supplied with proven tuning calibrations and a handheld programmer set for a 180+ HP gain over stock, on 7 psi of boost and pump gas. Higher boost levels and horsepower gains of up to 50% are possible with an Intercooled Tuner Kit and custom tuning, and even higher with modified motors. For hyper-custom racing builds, F-Series supercharger models up to the 10.5” volute (F-1X and F-2) can be installed without the need for additional brackets.

    These ProCharger systems also give Corvette owners multiple options in both the performance and appearance arenas, with your choice of a vertical or horizontal-mounted intercooler, a supercharger air inlet with race-style filter or a factory air box interface, and either polished, satin, or black finish for the brackets and head unit.

    Tuner Kits:
    These kits make sense for someone wanting to perform custom tuning of the car and push the envelope in performance. Will most likely be experimenting with alternative fuels such as 93 octane, race fuel, E85 fuel, and methanol supplemental fuel. In addition, possibly changing engine components like heads, headers, exhaust, and cams for the engine.
    Learn More
  3. Vortech V-15 Z-Trim Supercharger BLACK (C5, C6, C7 Corvettes) - 2P129-034

    Vortech V-15 Z-Trim Supercharger BLACK (C5, C6, C7 Corvettes) - 2P129-034

    $6,511.99

    The next step in compressor development, featuring an all-new, all-billet gearcase, and incorporating a technologically advanced, high-efficiency, 5-Axis machined billet impeller and high-diffusion housing developed in our SAE-J1723-compliant supercharger test cell.

    The V-15 Z-Trim Supercharger was specifically designed to fit in the C5, C6, & C7 Corvette. It combines the advanced technology and race-proven performance that you have come to expect from Vortech, and applies it to address the ever growing horsepower demands of the Corvette Enthusiast. The Z-Trim compressor stage is named after Zora Arkus-Duntov, Belgian-Born American Engineer who earned the nickname "The Father of the Corvette".

    Performance Specs

    Internal Step-Up Ratio: 3.45:1
    Max Speed: 65,000 RPM
    Max Boost: 35 PSI
    Max Flow: 3,100 CFM
    Max Power: 1,900 HP
    Peak Efficiency: 73%

    Dimensions

    Discharge OD: 3.00"
    Inlet OD: 5.00"
    Inducer Diameter: 4.399"
    Learn More
  4. Vortech V-15 Z-Trim Supercharger POLISHED (C5, C6, C7 Corvettes) - 2P129-038

    Vortech V-15 Z-Trim Supercharger POLISHED (C5, C6, C7 Corvettes) - 2P129-038

    $6,511.99

    The next step in compressor development, featuring an all-new, all-billet gearcase, and incorporating a technologically advanced, high-efficiency, 5-Axis machined billet impeller and high-diffusion housing developed in our SAE-J1723-compliant supercharger test cell.

    The V-15 Z-Trim Supercharger was specifically designed to fit in the C5, C6, & C7 Corvette. It combines the advanced technology and race-proven performance that you have come to expect from Vortech, and applies it to address the ever growing horsepower demands of the Corvette Enthusiast. The Z-Trim compressor stage is named after Zora Arkus-Duntov, Belgian-Born American Engineer who earned the nickname "The Father of the Corvette".

    Performance Specs

    Internal Step-Up Ratio: 3.45:1
    Max Speed: 65,000 RPM
    Max Boost: 35 PSI
    Max Flow: 3,100 CFM
    Max Power: 1,900 HP
    Peak Efficiency: 73%

    Dimensions

    Discharge OD: 3.00"
    Inlet OD: 5.00"
    Inducer Diameter: 4.399"
    Learn More
  5. Edelbrock 15719 Replacement Harmonic Damper for 2014-15 Chevrolet Corvette Base Model (Wet Sump)

    Edelbrock 15719 Replacement Harmonic Damper for 2014-15 Chevrolet Corvette Base Model (Wet Sump)

    $776.95

    DETAILS
    Edelbrock Part # 15719 replacement damper is for use with 2014-15 C7 Corvette Stingrays equipped with an E-Force supercharger system. This is the same dampers that are supplied with all E-Force Corvette Stingray Supercharger systems. Damper #15719 can be used to convert a dry sump oil system to a wet sump oil system.to a dry sump oil system. Includes damper and bolt.

    SPECS
    Availability Available
    Mounting Hole Quantity 3
    Grade Type Performance
    Mounting Hole Diameter 1.615 in
    Quantity Sold Individually
    Keyway Type Single; 3/16
    Drive Belt Type Serpentine (Not Included)
    Bolt And Washer Included Yes
    Center Bolt Length 5.75 in
    Center Bolt Thread Type 2.0 mm
    Application Application Specific
    UPC 00085347157198
    Availability Note Available to Order
    Warranty 12 Months
    Hazardous Materials Warning WARNING: This product can expose you to Chrome, which is known to the State of California to cause cancer or birth defects or other reproductive harm. For more information, visit www.P65warnings.ca.gov.
    Installation Notes
    Proper installation is the responsibility of the installer. Improper installation will void your warranty and may result in poor performance and engine or vehicle damage.
    Depth 3.469 in
    Finish Black Powder Coated
    Inside Diameter 1.615 in
    Material Steel
    Outside Diameter 6.800 in
    Learn More
  6. Edelbrock 15709 Replacement Harmonic Damper for 2014-15 Chevrolet Corvette Z51 (Dry Sump)

    Edelbrock 15709 Replacement Harmonic Damper for 2014-15 Chevrolet Corvette Z51 (Dry Sump)

    $786.95

    DETAILS
    Edelbrock Part # 15709 replacement damper is for use with 2014-15 C7 Corvette Stingrays equipped with an E-Force supercharger system. This is the same damper that are supplied with all E-Force Corvette Stingray Supercharger systems. Damper #15709 can also be used to convert a wet sump oil system to a dry sump system. Includes damper and bolt.

    SPECS
    Availability Available
    Mounting Hole Quantity 3
    Grade Type Performance
    Mounting Hole Diameter 1.615 in
    Quantity Sold Individually
    Keyway Type Single; 3/16
    Drive Belt Type Serpentine (Not Included)
    Bolt And Washer Included Yes
    Center Bolt Length 5.75
    Center Bolt Thread Type 2.0 mm
    Application Application Specific
    UPC 00085347157099
    Availability Note Available to Order
    Warranty 12 Months
    Hazardous Materials Warning WARNING: This product can expose you to Chrome, which is known to the State of California to cause cancer or birth defects or other reproductive harm. For more information, visit www.P65warnings.ca.gov.
    Installation Notes
    Proper installation is the responsibility of the installer. Improper installation will void your warranty and may result in poor performance and engine or vehicle damage.
    Depth 2.783 in
    Finish Black Powder Coated
    Inside Diameter 1.615 in
    Material Steel
    Outside Diameter 6.800 in
    Learn More
  7. Edelbrock 41124 E-Force Supercharger Aluminum Coil Covers for 2014-15 Corvette

    Edelbrock 41124 E-Force Supercharger Aluminum Coil Covers for 2014-15 Corvette

    $446.95

    DETAILS
    Edelbrock part # 41124 aluminum coil covers are designed for 2014-15 Corvette with an E-Force Supercharger. Our kit is geared towards those with competition versions of the supercharger kits, which do not include coil covers, but would like to add them. Covers are designed to fit around the supercharger unit and will not fit naturally aspirated motors.

    SPECS
    Availability Available
    Mounting Hardware Included Yes
    Quantity Kit
    Attachment Type Bolt-On
    Application Application Specific
    UPC 00085347411245
    Availability Note Available to Order
    Warranty 12 Months
    Hazardous Materials Warning WARNING: This product can expose you to Chrome, which is known to the State of California to cause cancer or birth defects or other reproductive harm. For more information, visit www.P65warnings.ca.gov.
    Installation Notes
    Depending on your application, there will be two different factory valve cover bushings: a 5/8
    Finish Black And Red Textured Powder Coated
    Material Cast Aluminum
    Universal Or Specific Fit Specific
    Learn More
  8. Edelbrock 15815 15% Overdrive Crank Pulley for 2014-19 C7 Corvette E-Force Supercharger Systems

    Edelbrock 15815 15% Overdrive Crank Pulley for 2014-19 C7 Corvette E-Force Supercharger Systems

    $373.95

    DETAILS
    Edelbrock part # 15815 is a 15% overdrive crank pulley is for use with a 2014-19 Corvette Stingray with an Edelbrock E-Force Supercharger system installed. It features an 8.7" diameter 10-rib secondary and stock diameter primary drive that delivers maximum traction and stability in supercharged applications. It’s an ideal solution when a smaller pulley is not an option.

    SPECS
    Availability Available
    Recommended Use For E-Force Supercharger Systems
    Mounting Hole Quantity 3
    Mounting Hole Diameter 10 mm
    Quantity Sold Individually
    Pulley Groove Quantity 10-Rib
    Belt Type Serpentine (Not Included)
    Application Application Specific
    UPC 00085347158157
    Availability Note Available to Order
    Warranty 12 Months
    Emissions Code
    Hazardous Materials Warning WARNING: This product can expose you to Chrome, which is known to the State of California to cause cancer or birth defects or other reproductive harm. For more information, visit www.P65warnings.ca.gov.
    Installation Notes
    Chevrolet Corvette 2019-2014
    Finish Black Anodized
    Inside Diameter 7.48 in
    Material Aluminum
    Outside Diameter 8.7 in
    Width 8.706 in
    Learn More
  9. Edelbrock 15702 E-Force Supercharger for 2014-19 Corvette Stingray Z51 LT1 Pro-Tuner (No Tune)

    Edelbrock 15702 E-Force Supercharger for 2014-19 Corvette Stingray Z51 LT1 Pro-Tuner (No Tune)

    $8,620.87

    DETAILS
    The Edelbrock E-Force Supercharger Stage 3 Pro-Tuner system part # 15702 is designed for use with 2014-19 Chevy Corvette Stingray Z51 applications with the LT1 engine. The Edelbrock E-Force competition supercharger is based off of our street supercharger kit but is paired down to the essential components that a racer needs, without the extras that experienced racers prefer to customize for their own competitive advantage. Featuring a unique design with minimal components and fits under the stock hood. The core of this system is the Eaton Gen VI 2300 TVS Supercharger rotating assembly with a four lobe design with 160 degrees of twist for maximum flow, minimum temperature rise and quiet operation for excellent drivability. We also designed our superchargers with an integrated bypass valve to help eliminate parasitic loss under light throttle, improving mileage potential. Our unique and efficient inlet configuration results in a shorter, less restrictive intake path for improved air flow, without the need for a jack-shaft. This system requires the use of a universal heat exchanger (sold separately). Our #15702 Tuner system includes all of the essential components that a racer would need to build a custom supercharged racing setup. This system offers flexibility in pulley selection, cold air intake and more. These systems are for competition racing use only. This kit DOES NOT INCLUDE A TUNE, A CUSTOM TUNE MUST BE USED, NOT AVAILABLE THROUGH EDELBROCK. Finally... the Edelbrock E-Force Supercharger system is not just a performance upgrade, it also has great looks! The supercharger assembly and aluminum coil covers (on most applications) are powder coated for durability and provide a unique appearance that will give any engine compartment a custom look.

    SPECS
    Availability Available
    System Type Stage 3 - Pro-Tuner System
    Housing Material Cast Aluminum
    Gasket Or Seal Included Yes
    Mounting Hardware Included Yes
    Quantity Kit
    Oil Capacity 150 mL
    Center Housing Cooling Type Intercooler
    Internal Step Up Yes
    Mounting Bracket Included Yes
    Application Application Specific
    UPC 00085347157020
    Availability Note Available to Order
    Warranty 36 Months
    Emissions Code
    Hazardous Materials Warning WARNING: This product can expose you to Chrome, which is known to the State of California to cause cancer or birth defects or other reproductive harm. For more information, visit www.P65warnings.ca.gov.
    Installation Notes
    Chevrolet Corvette 2014-2019
    Finish Black Powder Coated
    Universal Or Specific Fit Specific
    Learn More

Grid List

Set Ascending Direction
Page:
  1. 1
  2. 2
  3. 3
  4. 4
  5. 5
Recently viewed products

video title

video content