BORLA® has developed a revolutionary new exhaust technology that enables our engineers to deliver unprecedented vehicle-specific control over the acoustical note of an exhaust throughout the RPM range, while retaining 100% of the power-adding capabiities of BORLA’s patented multicore design. Called ATAK™ (Acoustically-Tuned Applied Kinetics), this new technology produces the highest available dB (decibel) levels in the BORLA street-legal lineup, and is designed for high-performance purists who prefer exhaust notes over their stereos. The focus of ATAK™ is to pump the volume while retaining clarity of sound, avoiding distortion typically found in louder exhausts. With ATAK™, the sound output is tuned like a graphic equalizer to shape and focus sound waves for optimum high-volume output. The development of each ATAK™ system begins with extensive study of each vehicle’s acoustical properties. The technology is based on custom-tuned attributes of the internal muffler cores, which are calibrated on a vehicle-by-vehicle basis to deliver the most desirable sound. A complete technology overview with extensive video footage of launch, drive-by, and in-cabin sounds with a 2010 Camaro SS can be viewed at www.youtube.com/borla. “The distance from the exhaust manifold to the rear bumper, the shape of the underbody shielding, the amount of ground clearance, all these factors affect the sound, and they’re different on each vehicle. With ATAK™ we take all this into account, and the result will blow you away,” says company Sales Marketing Manager, David Borla. Several BORLA ATAK™ systems are currently available. For the 2010 6.2L V8 Camaro there is a Cat-Back™ systems (PN 140356 and 140378) and Rear Section (PN 11788) for models without the “Ground Effects” option, and a rear section (PN 11794) designed to complement the Ground Effects kit. NOTE: YouTube/Borla ATAK Video sound comparisons were done with Cat-back© systems only. Your results may vary depending on additional equipment. REAR SECTIONS MAINTAIN STOCK FRONT MUFFLER SO THE FULL EFFECT OF THE ATAK SOUND IS NOT REALIZED, BUT STILL LOUDER THAN THE S-TYPE. Like all BORLA exhaust products, each system is handmade in the USA by master craftspeople and features premium 300-Series high-quality austenitic stainless steel construction, ultra-smooth mandrel bent piping, mirror-polished tips, and a Million-Mile WarrantyLearn More

Borla Axle-Back Exhaust System - S-Type (2010-2013 Camaro) - 11776

S-Type Axle-Back Exhaust System for 2010 Ford Mustang GT 4.6L V8 Automatic/ Manual Transmission Rear Wheel Drive; 2 Door Coupe; Convertible.

Borla is proud to offer a true "Made in the USA" product sold around the world.
Upgrading your factory exhaust system to a Borla T-304 stainless steel performance Axle-Back system with a more efficient and less restrictive design can improve sound (adding more enjoyment driving your vehicle) and increase engine horsepower and torque throughout the RPM range (allowing quicker acceleration to pass a vehicle or get to highway speeds quicker).
Everywhere you look, Borla's spirit of innovation and excitement screams with the same high-volume clarity as our unrivaled exhaust systems.
The mufflers in our Axle-Back systems are tuned for each specific application. Due to this they will dramatically reduce, or eliminate drone on the cabin of the vehicle while delivering that great Borla'sound.
Borla'systems are designed for bolt on installation.
We are a company of motorheads, and it shows in our products, customer service, industry-leading Million Mile Warranty, and culture. On weekends, the same Borla employees who built your exhaust or helped you with technical support can be found competing at tracks, drag strips, off-road events and car shows.
Constructed using T-304 stainless steel for long life and sharp appearance, and features all welded construction for maximum durability.
Unlike any other exhaust brand, Borla'systems are designed from scratch on a vehicle-by-vehicle basis. Every car or truck has unique mechanical and acoustical properties, all taken into account as we spend countless hours optimizing muffler body shapes, internal core configurations, flow dynamics, sound and more.
For many applications, Borla gives you a variety of choices for the volume and character of your exhaust note? From a subdued rumble to an all-out roar.
Million-Mile warranty.
Everything we've learned from racing and street performance over nearly four decades is reflected in each product that leaves our facilities.
Made in the USA.
Along with the distinctive Borla "Sound of



PRODUCT NOTES:
Construction - All Welded
Exhaust Type - Axle-Back System
Exit Position - Rear
Exit Style - Single Split Rear Exit
Inlet Inside Diameter - 2.250 in.
Material - T-304 Stainless Steel
Muffler Type - Straight-Through
Off Road Use Only - No
Outlet Outside Diameter - 2.250 in.
Prop 65 - Long Label - WARNING: This product in the physical form it is sold does not present a hazard. However; operations including; but not limited to welding; brazing; or thermal cutting can expose you to chemicals including Chromium; Nickel; Cobalt; Arsenic; Cadmium and Le


Lethal Performance is proud to offer the entire line of Borla products!
Learn More

Borla Axle-Back Exhaust System - S-Type (2014-2015 Camaro) - 11845

S-Type Axle-Back Exhaust System for 2014-2015 Chevrolet Camaro 3.6L V6 Automatic/ Manual Transmission Rear Wheel Drive 2 Door (except RS with Dual Mode exhaust).

Borla is proud to offer a true "Made in the USA" product sold around the world.
Upgrading your factory exhaust system to a Borla T-304 stainless steel performance Axle-Back system with a more efficient and less restrictive design can improve sound (adding more enjoyment driving your vehicle) and increase engine horsepower and torque throughout the RPM range (allowing quicker acceleration to pass a vehicle or get to highway speeds quicker).
Everywhere you look, Borla's spirit of innovation and excitement screams with the same high-volume clarity as our unrivaled exhaust systems.
The mufflers in our Axle-Back systems are tuned for each specific application. Due to this they will dramatically reduce, or eliminate drone on the cabin of the vehicle while delivering that great Borla'sound.
Borla'systems are designed for bolt on installation.
We are a company of motorheads, and it shows in our products, customer service, industry-leading Million Mile Warranty, and culture. On weekends, the same Borla employees who built your exhaust or helped you with technical support can be found competing at tracks, drag strips, off-road events and car shows.
Constructed using T-304 stainless steel for long life and sharp appearance, and features all welded construction for maximum durability.
Unlike any other exhaust brand, Borla'systems are designed from scratch on a vehicle-by-vehicle basis. Every car or truck has unique mechanical and acoustical properties, all taken into account as we spend countless hours optimizing muffler body shapes, internal core configurations, flow dynamics, sound and more.
For many applications, Borla gives you a variety of choices for the volume and character of your exhaust note? From a subdued rumble to an all-out roar.
Million-Mile warranty.
Everything we've learned from racing and street performance over nearly four decades is reflected in each product that leaves our facilities.
Made in the USA.
Along with the distinctive Borla "Sound of



PRODUCT NOTES:
Construction - All Welded
Exhaust Type - Axle-Back System
Exit Position - Split
Exit Style - Single Split Rear Exit
Inlet Inside Diameter - 2.250 in.
Material - T-304 Stainless Steel
Muffler Type - Straight-Through
Off Road Use Only - No
Outlet Outside Diameter - 2.250 in.
Prop 65 - Long Label - WARNING: This product in the physical form it is sold does not present a hazard. However; operations including; but not limited to welding; brazing; or thermal cutting can expose you to chemicals including Chromium; Nickel; Cobalt; Arsenic; Cadmium and Le


Lethal Performance is proud to offer the entire line of Borla products!
Learn More

Borla Axle-Back Exhaust System - S-Type (2014-2015 Camaro) - 11849

S-Type Axle-Back Exhaust System for 2014-2015 Chevrolet Camaro SS 6.2L V8 Automatic/ Manual Transmission Rear Wheel Drive 2 Door.

Borla is proud to offer a true "Made in the USA" product sold around the world.
Upgrading your factory exhaust system to a Borla T-304 stainless steel performance Axle-Back system with a more efficient and less restrictive design can improve sound (adding more enjoyment driving your vehicle) and increase engine horsepower and torque throughout the RPM range (allowing quicker acceleration to pass a vehicle or get to highway speeds quicker).
Everywhere you look, Borla's spirit of innovation and excitement screams with the same high-volume clarity as our unrivaled exhaust systems.
The mufflers in our Axle-Back systems are tuned for each specific application. Due to this they will dramatically reduce, or eliminate drone on the cabin of the vehicle while delivering that great Borla'sound.
Borla'systems are designed for bolt on installation.
We are a company of motorheads, and it shows in our products, customer service, industry-leading Million Mile Warranty, and culture. On weekends, the same Borla employees who built your exhaust or helped you with technical support can be found competing at tracks, drag strips, off-road events and car shows.
Constructed using T-304 stainless steel for long life and sharp appearance, and features all welded construction for maximum durability.
Unlike any other exhaust brand, Borla'systems are designed from scratch on a vehicle-by-vehicle basis. Every car or truck has unique mechanical and acoustical properties, all taken into account as we spend countless hours optimizing muffler body shapes, internal core configurations, flow dynamics, sound and more.
For many applications, Borla gives you a variety of choices for the volume and character of your exhaust note? From a subdued rumble to an all-out roar.
Million-Mile warranty.
Everything we've learned from racing and street performance over nearly four decades is reflected in each product that leaves our facilities.
Made in the USA.
Along with the distinctive Borla "Sound of



PRODUCT NOTES:
Construction - All Welded
Exhaust Type - Axle-Back System
Exit Position - Split Rear
Exit Style - Single Split Rear Exit
Inlet Inside Diameter - 2.500 in.
Material - T-304 Stainless Steel
Muffler Type - Straight-Through
Off Road Use Only - No
Outlet Outside Diameter - 2.500 in.
Prop 65 - Long Label - WARNING: This product in the physical form it is sold does not present a hazard. However; operations including; but not limited to welding; brazing; or thermal cutting can expose you to chemicals including Chromium; Nickel; Cobalt; Arsenic; Cadmium and Le


Lethal Performance is proud to offer the entire line of Borla products!
Learn More

Borla Axle-Back Exhaust System - Atak (2014-2015 Camaro) - 11851

ATAK Axle-Back Exhaust System for 2014-2015 Chevrolet Camaro SS 6.2L V8 Automatic/ Manual Transmission Rear Wheel Drive 2 Door.

Borla is proud to offer a true "Made in the USA" product sold around the world.
Upgrading your factory exhaust system to a Borla T-304 stainless steel performance Axle-Back system with a more efficient and less restrictive design can improve sound (adding more enjoyment driving your vehicle) and increase engine horsepower and torque throughout the RPM range (allowing quicker acceleration to pass a vehicle or get to highway speeds quicker).
Everywhere you look, Borla's spirit of innovation and excitement screams with the same high-volume clarity as our unrivaled exhaust systems.
The mufflers in our Axle-Back systems are tuned for each specific application. Due to this they will dramatically reduce, or eliminate drone on the cabin of the vehicle while delivering that great Borla'sound.
Borla'systems are designed for bolt on installation.
We are a company of motorheads, and it shows in our products, customer service, industry-leading Million Mile Warranty, and culture. On weekends, the same Borla employees who built your exhaust or helped you with technical support can be found competing at tracks, drag strips, off-road events and car shows.
Constructed using T-304 stainless steel for long life and sharp appearance, and features all welded construction for maximum durability.
Unlike any other exhaust brand, Borla'systems are designed from scratch on a vehicle-by-vehicle basis. Every car or truck has unique mechanical and acoustical properties, all taken into account as we spend countless hours optimizing muffler body shapes, internal core configurations, flow dynamics, sound and more.
For many applications, Borla gives you a variety of choices for the volume and character of your exhaust note? From a subdued rumble to an all-out roar.
Million-Mile warranty.
Everything we've learned from racing and street performance over nearly four decades is reflected in each product that leaves our facilities.
Made in the USA.
Along with the distinctive Borla "Sound of



PRODUCT NOTES:
Construction - All Welded
Exhaust Type - Axle-Back System
Exit Position - Split Rear
Exit Style - Single Split Rear Exit
Inlet Inside Diameter - 2.500 in.
Material - T-304 Stainless Steel
Muffler Type - Straight-Through
Off Road Use Only - No
Outlet Outside Diameter - 4.500 in.
Prop 65 - Long Label - WARNING: This product in the physical form it is sold does not present a hazard. However; operations including; but not limited to welding; brazing; or thermal cutting can expose you to chemicals including Chromium; Nickel; Cobalt; Arsenic; Cadmium and Le


Lethal Performance is proud to offer the entire line of Borla products!
Learn More

Borla Axle-Back Exhaust System - S-Type (2016-2020 Camaro) - 11920

S-Type Axle-Back Exhaust System for 2016-2020 Chevrolet Camaro SS 6.2L V8 Automatic/ Manual Transmission Rear Wheel Drive 2 Door Equipped With Dual Mode Exhaust (NPP) or Dual Split Rear Exit Bumper. BORLA System Does Not Include Valves.

Borla is proud to offer a true "Made in the USA" product sold around the world.
Upgrading your factory exhaust system to a Borla T-304 stainless steel performance Axle-Back system with a more efficient and less restrictive design can improve sound (adding more enjoyment driving your vehicle) and increase engine horsepower and torque throughout the RPM range (allowing quicker acceleration to pass a vehicle or get to highway speeds quicker).
Everywhere you look, Borla's spirit of innovation and excitement screams with the same high-volume clarity as our unrivaled exhaust systems.
The mufflers in our Axle-Back systems are tuned for each specific application. Due to this they will dramatically reduce, or eliminate drone on the cabin of the vehicle while delivering that great Borla'sound.
Borla'systems are designed for bolt on installation.
We are a company of motorheads, and it shows in our products, customer service, industry-leading Million Mile Warranty, and culture. On weekends, the same Borla employees who built your exhaust or helped you with technical support can be found competing at tracks, drag strips, off-road events and car shows.
Constructed using T-304 stainless steel for long life and sharp appearance, and features all welded construction for maximum durability.
Unlike any other exhaust brand, Borla'systems are designed from scratch on a vehicle-by-vehicle basis. Every car or truck has unique mechanical and acoustical properties, all taken into account as we spend countless hours optimizing muffler body shapes, internal core configurations, flow dynamics, sound and more.
For many applications, Borla gives you a variety of choices for the volume and character of your exhaust note? From a subdued rumble to an all-out roar.
Million-Mile warranty.
Everything we've learned from racing and street performance over nearly four decades is reflected in each product that leaves our facilities.
Made in the USA.
Along with the distinctive Borla "Sound of



PRODUCT NOTES:
Construction - All Welded
Exhaust Type - Axle-Back System
Exit Position - Dual Split Rear
Exit Style - Dual Split Rear Exit
Inlet Inside Diameter - 2.750 in.
Material - T-304 Stainless Steel
Muffler Type - Straight-Through
Off Road Use Only - No
Outlet Outside Diameter - 2.500 in.
Prop 65 - Long Label - WARNING: This product in the physical form it is sold does not present a hazard. However; operations including; but not limited to welding; brazing; or thermal cutting can expose you to chemicals including Chromium; Nickel; Cobalt; Arsenic; Cadmium and Le


Lethal Performance is proud to offer the entire line of Borla products!
Learn More

Borla Axle-Back Exhaust System - S-Type (2016-2020 Camaro) - 11920CB

S-Type Axle-Back Exhaust System for 2016-2020 Chevrolet Camaro SS 6.2L V8 Automatic/ Manual Transmission Rear Wheel Drive 2 Door Equipped With Dual Mode Exhaust (NPP) or Dual Split Rear Exit Bumper. BORLA System Does Not Include Valves.

Borla is proud to offer a true "Made in the USA" product sold around the world.
Upgrading your factory exhaust system to a Borla T-304 stainless steel performance Axle-Back system with a more efficient and less restrictive design can improve sound (adding more enjoyment driving your vehicle) and increase engine horsepower and torque throughout the RPM range (allowing quicker acceleration to pass a vehicle or get to highway speeds quicker).
Everywhere you look, Borla's spirit of innovation and excitement screams with the same high-volume clarity as our unrivaled exhaust systems.
The mufflers in our Axle-Back systems are tuned for each specific application. Due to this they will dramatically reduce, or eliminate drone on the cabin of the vehicle while delivering that great Borla'sound.
Borla'systems are designed for bolt on installation.
We are a company of motorheads, and it shows in our products, customer service, industry-leading Million Mile Warranty, and culture. On weekends, the same Borla employees who built your exhaust or helped you with technical support can be found competing at tracks, drag strips, off-road events and car shows.
Constructed using T-304 stainless steel for long life and sharp appearance, and features all welded construction for maximum durability.
Unlike any other exhaust brand, Borla'systems are designed from scratch on a vehicle-by-vehicle basis. Every car or truck has unique mechanical and acoustical properties, all taken into account as we spend countless hours optimizing muffler body shapes, internal core configurations, flow dynamics, sound and more.
For many applications, Borla gives you a variety of choices for the volume and character of your exhaust note? From a subdued rumble to an all-out roar.
Million-Mile warranty.
Everything we've learned from racing and street performance over nearly four decades is reflected in each product that leaves our facilities.
Made in the USA.
Along with the distinctive Borla "Sound of



PRODUCT NOTES:
Construction - All Welded
Exhaust Type - Axle-Back System
Exit Position - Dual Split Rear
Inlet Inside Diameter - 2.750 in.
Material - T-304 Stainless Steel
Off Road Use Only - No
Prop 65 - Long Label - WARNING: This product in the physical form it is sold does not present a hazard. However; operations including; but not limited to welding; brazing; or thermal cutting can expose you to chemicals including Chromium; Nickel; Cobalt; Arsenic; Cadmium and Le
Prop 65 - Short Label - Proposition 65 Warning.JPG
Prop 65 (C, R or CR) - CR
Prop 65 Yes/No - Yes


Lethal Performance is proud to offer the entire line of Borla products!
Learn More

Borla Axle-Back Exhaust System - Atak (2016-2020 Camaro) - 11921

ATAK Axle-Back Exhaust System for 2016-2020 Chevrolet Camaro SS 6.2L V8 Automatic/ Manual Transmission Rear Wheel Drive 2 Door Equipped With Dual Mode Exhaust (NPP) or Dual Split Rear Exit Bumper. BORLA System Does Not Include Valves.

Borla is proud to offer a true "Made in the USA" product sold around the world.
Upgrading your factory exhaust system to a Borla T-304 stainless steel performance Axle-Back system with a more efficient and less restrictive design can improve sound (adding more enjoyment driving your vehicle) and increase engine horsepower and torque throughout the RPM range (allowing quicker acceleration to pass a vehicle or get to highway speeds quicker).
Everywhere you look, Borla's spirit of innovation and excitement screams with the same high-volume clarity as our unrivaled exhaust systems.
The mufflers in our Axle-Back systems are tuned for each specific application. Due to this they will dramatically reduce, or eliminate drone on the cabin of the vehicle while delivering that great Borla'sound.
Borla'systems are designed for bolt on installation.
We are a company of motorheads, and it shows in our products, customer service, industry-leading Million Mile Warranty, and culture. On weekends, the same Borla employees who built your exhaust or helped you with technical support can be found competing at tracks, drag strips, off-road events and car shows.
Constructed using T-304 stainless steel for long life and sharp appearance, and features all welded construction for maximum durability.
Unlike any other exhaust brand, Borla'systems are designed from scratch on a vehicle-by-vehicle basis. Every car or truck has unique mechanical and acoustical properties, all taken into account as we spend countless hours optimizing muffler body shapes, internal core configurations, flow dynamics, sound and more.
For many applications, Borla gives you a variety of choices for the volume and character of your exhaust note? From a subdued rumble to an all-out roar.
Million-Mile warranty.
Everything we've learned from racing and street performance over nearly four decades is reflected in each product that leaves our facilities.
Made in the USA.
Along with the distinctive Borla "Sound of



PRODUCT NOTES:
Construction - All Welded
Exhaust Type - Axle-Back System
Exit Position - Dual Side Rear
Exit Style - Dual Split Rear Exit
Inlet Inside Diameter - 2.750 in.
Material - T-304 Stainless Steel
Muffler Type - Straight-Through
Off Road Use Only - No
Outlet Outside Diameter - 2.500 in.
Prop 65 - Long Label - WARNING: This product in the physical form it is sold does not present a hazard. However; operations including; but not limited to welding; brazing; or thermal cutting can expose you to chemicals including Chromium; Nickel; Cobalt; Arsenic; Cadmium and Le


Lethal Performance is proud to offer the entire line of Borla products!
Learn More