KIT INCLUDES:
•JLT Plastic Intake Tube
•Silicone Coupler
•5x8 S&B Powerstack Air Filter
•Heat Shield with duct
•HD Clamps & all needed hardware
•BOV/Bypass valve cap in case you go with an aftermarket Blow off valve in the future.

Learn More

K and N Filters Performance Air Intake System - 63-2606

AIRCHARGER; FORD MUSTANG L4-2.3L F/I, 2018-2021


Learn More

Steeda ProFlow EcoBoost CAI 2015+ Mustang - 555-3199

Steeda Autosports, the world's largest aftermarket manufacturer of Ford performance equipment is once again leading the performance market with our High-Velocity Steeda ProFlow Mustang Cold Air Intake for 2015+ S550 Ford EcoBoost Mustang.

This Steeda ProFlow Mustang Cold Air Intake for 2015+ EcoBoost Mustang opens up the intake system of Ford's new turbocharged 2.3L L4 power plant and allows it to breathe much more freely than the stock intake system allows - taking your 2015+ EcoBoost Mustang to the next level of performance.

Our engineers started with a large surface area high-flow nano-fiber air filter, added our famous 'race-tested' velocity stack entry, and then designed a black rotary-molded heat shield with a durable rubber gasket to seal the shield against the vehicle's hood.

You would think this is more than enough, but we went the extra mile and designed this intake system with a complete replacement intake tube from the CAI box to the turbo!

This Steeda ProFlow Mustang Cold Air Intake for S550 2015+ EcoBoost Mustang is so effective at improving airflow to the engine that simply bolting it on will increase your horsepower and torque. A performance tune can be added for maximum performance! In an effort to maximize performance and provide our customers with only the very best products we have partnered with the leader in automotive tuning - SCT Performance.

You have the option to run this bolt-on CAI with or without a tune. Please reference our dyno sheet included in the images above:

- Baseline run (non-PP): 256.51 rwhp and 288.27 ft/lbs tq

- CAI installed (factory tune): 283.21 rwhp and 298.03 ft/lbs tq

- CAI installed with Steeda tune: 304.28 rwhp and 366.26 ft/lbs tq

With no tune, we saw a gain of 26.7 rwhp and 9.76 ft/lbs tq!

With a Steeda tune, we saw a gain of 47.77 rwhp and 77.99 ft/lbs tq over stock!

Purchase your Steeda ProFlow EcoBoost Mustang Cold Air Intake for your S550 Mustang EcoBoost at Steeda Autosports today!

This limited warranty is the only express warranty applicable to Steeda Autosports products. Other rights may arise or vary from state to state in the United States. Steeda is not responsible for any time for which you may lose the use of your vehicle, any inconvenience you might be caused, the loss of your transportation or any part thereof, or any other incidental or consequential damages you may have.

Product Benefits

• CARB approved for 2015-2017 Mustang EcoBoost
• Does not get heat soaked like factory air box
• Cools to ambient temperature range significantly faster than the stock unit while producing more power
• Easy bolt in installation
• Better flowing intake system
• HP and Torque increase at all RPM ranges - not just peak power
• Stock tune with Steeda EcoBoost CAI - 26.7 rwhp and 9.76 ft/lbs
• Steeda tune with Steeda EcoBoost CAI - 47.77 rwhp and 77.99 ft/lbs tq
• Lifetime warranty
• Steeda has been building Cold Air Intakes for Ford performance vehicles longer than any other company!

CARB Approval: This intake is CARB approved for 2015-2017 model years only. For these years, the intake is approved for sale in California, and states adopting California standards. For 2018+ models, please note that the intake is not approved for sale in California, please see the warning below for more information. 

Warning: Not approved for sale in California or states that require a California E.O. #. This part has been designed and is intended for off-road application only. Installation of this part on a vehicle that is driven on public roads may violate U.S. and Canadian laws and regulations. Steeda Tuning will not change, remove or alter any emissions control devices on your vehicle.

Learn More

Injen Evolution Cold Air Intake System (2015-2022 Mustang) - EVO9205

EVOLUTION Cold Air Intake System, Part No. EVO9205, 2015-2022 Ford Mustang L4-2.3L Turbo

The all-new EVO9205 Evolution cold air intake system by Injen Technology is the next generation of performance intake systems for the 2015-2022 Ford Mustang with the 2.3L EcoBoost engine. Every EVO9205 cold air intake is made in the USA from cross linked high density polyethylene for extreme durability. The box has a forward facing ram air scoop to provide fresh, clean air to your engine. This intake system also includes stainless steel hardware and automotive grade urethane couplers. No cutting or drilling is required for an easy installation process that does not require aftermarket tuning for exceptional HORSEPOWER and TORQUE GAINS.; The EVO9205 was precisely tuned and tested on our in-house dyno to replicate stock fueling while increasing horsepower and torque. The EVO9205 system features our patent-pending twist-lock system that eases the installation process and securely mounts a massive SuperNano-Web dry air filter.; When it comes to durability, Injen's Evolution series can't be beat! Some of our competitors use an inferior HDPE linear polyethylene to mold their intake systems. HDPE is cheap for manufacturing but doesn't come close to the strength and durability of XLPE polyethylene. Injen strictly uses the superior XLPE crosslinked polyethylene and has 20 times the environmental stress crack resistance of HDPE, 10 times the molecular weight of HDPE, and 5 times the impact and tensile strength of HDPE. In other words, Injen's Evolution intake systems are built tough and designed to outlast the competition!; XLPE Roto-molded Housing: The one-piece sealed housing on the EVO9205 utilizes the all-new Injen Twist-Lock System to securely attach the SuperNano-Web Dry air filter in place. The Twist-Lock system eliminates the use of unnecessary parts and gives you one of the simplest installations available. The EVO9205 housing also includes our Injen Clear-View badge for a cleaner, more aggressive under hood appearance. Designed in 3D ensures a hassle free, drop-in installation, this intake system attaches directly to the original factory airbox. Forward facing ram air scoop to provide cool, fresh air to your hungry turbo!; XLPE Durable Rotomolded intake tube: The EVO9205 Evolution Cold Air Intake System uses a custom designed and dyno-tuned intake tube to produce huge power gains while retaining an OE quality fit. This tube utilizes our patented MR Technology for accurate fuel trims for safe power improvements and no check engine lights.; SuperNano-Web Dry Air Filter: 'That's massive!' is all you will hear about this SuperNano-Web Dry air filter that is included with the EVO9205 cold air intake system. Using the largest filter possible for this application has increased the available air volume, resulting in added power while keeping the installation process quick and simple.; Quality Hardware: From the Stainless Steel Band Clamps with an inner protective liner to the reinforced automotive grade silicone coupler, every aspect is covered for a perfect and secure fit.; Hassle-Free Installation: Make it easy! By designing this kit in a 3D workspace, you're ensured a quick and easy installation that not only increases the power output of your engine, but also provides a clean and powerful look that others see every time you pop your hood.; Dyno Proven: Clean and simple, NUMBERS talk! Injen has put in the time and diligence to stand behind our performance data. We put in the time to test and prove that we have developed a superior kit for your Ford Mustang Ecoboost. After hours of designing and dyno testing, Injen is proud to say that the EVO9205 Evolution Air Intake system puts down numbers of up to 23 additional horsepower and 21 Ft.-lbs. of torque.

Dyno Proven gains of up to 23 hp and 21 lb.-ft. of torque
Massive intake tube that tapers down from 5in OD to increase airflow velocity at the turbo inlet
Large forward-facing inlet to maximize incoming cool air from behind the grille
Intake tube features Injen's patented internal MegaRam (MR) Technology
No Tune Required - Designed to work seamless with the stock calibration
Aggressive under hood appearance while maintaining an OE fit
Utilizes our patented Twist-Lock Filter attachment system
Durable XLPE Roto-Molded Polyethylene tube and housing
Reinforced automotive grade silicone couplers
Fully serviceable Injen SuperNano-Web dry air filter
Replacement air filter # X-1107-BB
Stainless steel band clamps with inner protective liner
Aggressive under hood appearance while maintaining an OE fit
Our clear inspection badge allows you to quickly check the condition of your air filter while the red stripe enhances under hood appearances.
Made in Pomona California, USA
Injen Technology Limited Lifetime Warranty
Note: This product is not currently CARB exempt and is not available for purchase in California or for use on any vehicle registered with the California Department of Motor Vehicles.

During three decades, the Injen brand has patents developed that apply to several thousand new products. Injen brand is a household name among enthusiasts who demand high quality, dyno-proven solutions for their vehicles. As we continue to grow and expand into new market segments and to further regions of the world, the Injen team holds steadfast to the vision of our founder with innovation that transforms the look and performance of your vehicle.

Learn More

ROUSH’s newly-designed cold air intake for the 2018 2.3L I-4 Ecoboost engine brings staggering performance increases that can be achieved with an installation that takes under an hour, with no calibration required!

The ROUSH EcoBoost Cold Air Intake replaces the restrictive stock air intake, unlocking latent power and fuel efficiency. There’s no need for calibration or a custom tune, as this CAI system was engineered, tested, and designed to work with the completely stock 2.3L I-4 engine! Paired with Ford’s innovative EcoBoost engine, our ROUSH Cold Air Kit feeds cooler, denser air to the turbo, increasing overall power output, while also turning up the sound of your Mustang! Our kit provides more flow than the stock system at peak horsepower. Best of all, this system will not void your factory warranty!

An innovative dry filter is composed of two layers of wire mesh for durability, and is proven to retain its shape under high airflow. The filter is washable, re-usable, and requires no oiling.

Included in the kit is the air filter with clamp, injection-molded lower airbox/tray (featuring the ROUSH logo) with installed EPDM foam hood seal, blow-molded clean air tubes, and all required mounting hardware. The kit utilizes all factory emissions and vacuum lines. Factory mounting locations and hardware are utilized to allow for quick and easy installation. ROUSH also includes a 90-day limited parts warranty with this system.

NOT APPROVED FOR SALE IN CALIFORNIA OR STATES THAT REQUIRE CALIFORNIA E.O.#Learn More