CV Fab CVF Aluminum Intercooler Charge Pipe Kit with HKS Flange (2015-2021 Ford Mustang EcoBoost) - ECOMUSCHGEB2

Direct bolt-on replacement

2.5" hot-side piping and 2.75" cold-side piping in wrinkle black finish Mandrel-bent aluminum construction features significantly improved thermal capacity and 1/3 of the weight when compared to stainless steel alternatives Includes heavy-duty t-bolt clamps and ultra-resistant 4-ply couplers Designed for use with all aftermarket or stock intercoolers CNC-machined HKS flange (hot-side pipe) 1/8th in. NPT bung (cold-side pipe) CVF Lifetime Warranty

IMPROVES PERFORMANCE

The Intercooler Charge Pipe Kit with HKS Flange is designed to improve the performance of your EcoBoost Mustang's turbo by improving the performance of your intercooler. This kit replaces the weak stock rubber hot-side and the restrictive cold-side piping with mandrel-bent aluminum tubing for smoother airflow and facilitate the addition of a HKS blow off valve.

QUALITY CONSTRUCTION

The 2.5" mandrel-bent aluminum hot-side tubing features a CNC-machined BOV flange for use with a HKS BOV. The mandrel bends allow for smooth air flow and the 4-layer silicone couplers with ultra-resistance fibers offer enhanced tolerance against heat and pressure.

Manufactured from lightweight 2.75" mandrel-bent aluminum tubing, the cold-side pipe features a 1/8th in. CNC-machined NPT bung (comes plugged).

STRAIGHTFORWARD INSTALLATION

Designed to install easily with basic hand tools, this Charge Pipe Kit with HKS Flange requires no extra modifications and should only take you about 45 minutes to swap out. Complete with all necessary t-bolt clamps and ultra-resistant couplers, this kit allows for a quick install.

APPLICATION

This product is designed to fit both the automatic and manual 2015-2022 EcoBoost Mustangs which feature an HKS BOV.


Note - HKS BOV
Learn More

CV Fab CVF Aluminum Intercooler Charge Pipe Kit with TiAL Flange (2015-2021 Ford Mustang EcoBoost) - ECOMUSCHGEB1

Direct bolt-on replacement

2.5" hot-side piping and 2.75" cold-side piping in wrinkle black finish Mandrel-bent aluminum construction features significantly improved thermal capacity and 1/3 of the weight when compared to stainless steel alternatives Includes heavy-duty t-bolt clamps and ultra-resistant 4-ply couplers Designed for use with all aftermarket or stock intercoolers CNC-machined TiAL / TurboSmart Race Port TS-0204-1142 flange (hot-side pipe) 1/8th in. NPT bung (cold-side pipe) CVF Lifetime Warranty

IMPROVES PERFORMANCE

The Intercooler Charge Pipe Kit with TiAL Flange is designed to improve the performance of your EcoBoost Mustang's turbo by improving the performance of your intercooler. This kit replaces the weak stock rubber hot-side and the restrictive cold-side piping with mandrel-bent aluminum tubing for smoother airflow and facilitate the addition of a TiAL or Turbosmart Race Port TS-0204-1142 blow off valve.

QUALITY CONSTRUCTION

The 2.5" mandrel-bent aluminum hot-side tubing features a CNC-machined BOV flange for use with a TiAL / TurboSmart BOV. The mandrel bends allow for smooth air flow and the 4-layer silicone couplers with ultra-resistance fibers offer enhanced tolerance against heat and pressure.

Manufactured from lightweight 2.75" mandrel-bent aluminum tubing, the cold-side pipe features a 1/8th in. CNC-machined NPT bung (comes plugged).

STRAIGHTFORWARD INSTALLATION

Designed to install easily with basic hand tools, this Charge Pipe Kit with TiAL Flange requires no extra modifications and should only take you about 45 minutes to swap out. Complete with all necessary t-bolt clamps and ultra-resistant couplers, this kit allows for a quick install.

APPLICATION

This product is designed to fit both the automatic and manual 2015-2022 EcoBoost Mustangs which feature TiAL blow off valves or TurboSmart Race Ports with part number TS-0204-1142.


Note - TiAL + Turbo Smart TS-0204-1142 BOV
Learn More

CV Fab CVF Aluminum Intercooler Charge Pipe Kit (2015-2021 Ford Mustang EcoBoost) - ECOMUSCHGE1

SEE FEEDBACK FROM THE ECOBOOST MUSTANG COMMUNITY HERE:

Detailed product review by user slicer101 at MustangEcoBoost.net

Detailed product review by user slojas at MustangEcoBoost.net

Detailed product review by user eli_c_2005 at Mustang6G.com

Detailed product review by user RichBrew at Mustang6G.com

Direct bolt-on replacement 2.5" hot-side piping and 2.75" cold-side piping in wrinkle black finish Mandrel-bent aluminum construction features significantly improved thermal capacity and 1/3 of the weight when compared to stainless steel alternatives Includes heavy-duty t-bolt clamps and ultra-resistant 4-ply couplers Designed for use with all aftermarket or stock intercoolers CNC-machined DV flange (hot-side pipe) 1/8th in. NPT bung (cold-side pipe) CVF Lifetime Warranty

IMPROVES PERFORMANCE

The Intercooler Charge Pipe Kit designed to improve the performance of your EcoBoost Mustang's turbo by improving the performance of your intercooler. This kit replaces the weak stock rubber hot-side and the restrictive cold-side piping with mandrel-bent aluminum tubing for smoother airflow.

QUALITY CONSTRUCTION

The 2.5" mandrel-bent aluminum Hot-side tubing features a CNC-machined BPV (bypass valve) flange. The mandrel bends allow for smooth air flow and the 4-layer silicone couplers with ultra-resistance fibers offer enhanced tolerance against heat and pressure.

Manufactured from lightweight 2.75" mandrel-bent aluminum tubing, the cold-side pipe features a 1/8th in. CNC-machined NPT bung (comes plugged).

STRAIGHTFORWARD INSTALLATION

Designed to install easily with basic hand tools, this Charge Pipe Kit requires no extra modifications and should only take you about 45 minutes to swap out. Complete with all necessary t-bolt clamps and ultra-resistant 4-ply couplers, this kit allows for a quick install.

APPLICATION

This product is designed to fit both the automatic and manual 2015-2022 EcoBoost Mustangs with the stock DV flange or blow off valves specifically made to fit the OEM DV flange.


Note - Stock DV
Learn More

HPS Performance HPS Black Intercooler Charge Pipe Hot and Cold Side with blue hoses 17-102WB (2015-2020 Ford Mustang Ecoboost 2.3L Turbo) - 17-102WB

HPS Black Intercooler Pipe Complete Kit (Hot and Cold Side) with black high temp 4-ply reinforced silicone hoses is a direct replacement for 2015-2020 Mustang Ecoboost 2.3L Turbo oem intercooler pipings and rubber hoses. Made from lightweight mandrel bent aluminum tubing (2.5" OD for the HOT side, 2.75" OD for the Cold Side), the charge pipe kit has less bend and better air flow compared to the oem restrictive design. The bead rolled pipe ends prevent couplers from popping off under boost. The included HPS high temp 4-ply reinforced black silicone hoses with 100% stainless steel t-bolt clamps can withstand minimum 50+ psi of boost and replace the factory rubber couplers, which often crack or fail over a period of time. The intercooler piping kit optimize and smooth out the air flow, increase horsepower +17.1 Whp , torque +16.9 Ft/lbs and improve throttle response without re-tuning the ECU.

HPS Intercooler Pipe Kit Features and Specification
- Made from lightweight mandrel bent aluminum tubing (2.5" OD for the HOT side, 2.75" OD for the Cold Side), the charge pipe kit has less bend and better air flow compared to the oem restrictive design
- Increase horsepower +17.1 Whp , torque +16.9 Ft/lbs and improve throttle response without re-tuning the ECU
- The bead rolled pipe ends prevent couplers from popping off under boost.
- Features HPS signature race proven high temp 4-ply reinforced silicone hoses and industrial grade 100% stainless steel T-bolt clamps
- Includes easy to follow step-by-step installation manual with clear pictures and instructions to guide the installer throughout the whole process.
- No modification is required during the installation. Does not trigger CEL light
- Color: Black
- NOT CARB Compliant
- System Type: Intercooler Piping Kit (Hot and Cold Side)
- Vehicle Application: Fits 2015-2020 Ford Mustang Ecoboost 2.3L Turbo. Compatible with oem and aftermarket intercoolers utilizing factory oem intercooler piping.

- Deliver dyno proven performance gains increase 17.1 Whp horsepower, 16.9 Ft/lbs torque and improve throttle response; Does NOT require tuning after the install.
- Light weight mandrel-bent aluminum alloy piping replaces the stock restrictive piping (Hot and Cold Side). Bead rolled pipe ends prevent couplers from popping off under boost.
- Features HPS signature race proven high temp 4-ply reinforced silicone hoses and industrial grade 100% stainless steel T-bolt clamps.
- The included installation manual has clear pictures and instructions to guide the installer throughout the whole process. Bolt-on easy installation. No modification or tuning is required.
- Fits 2015-2020 Ford Mustang Ecoboost 2.3L Turbo. Compatible with oem and aftermarket intercoolers utilizing factory oem intercooler piping. NOT CARB Compliant
Color - Black
Learn More

HPS Performance HPS Polish Intercooler Charge Pipe Hot and Cold Side with blue hoses 17-102P (2015-2020 Ford Mustang Ecoboost 2.3L Turbo) - 17-102P

HPS Polish Intercooler Pipe Complete Kit (Hot and Cold Side) with black high temp 4-ply reinforced silicone hoses is a direct replacement for 2015-2020 Mustang Ecoboost 2.3L Turbo oem intercooler pipings and rubber hoses. Made from lightweight mandrel bent aluminum tubing (2.5" OD for the HOT side, 2.75" OD for the Cold Side), the charge pipe kit has less bend and better air flow compared to the oem restrictive design. The bead rolled pipe ends prevent couplers from popping off under boost. The included HPS high temp 4-ply reinforced black silicone hoses with 100% stainless steel t-bolt clamps can withstand minimum 50+ psi of boost and replace the factory rubber couplers, which often crack or fail over a period of time. The intercooler piping kit optimize and smooth out the air flow, increase horsepower +17.1 Whp , torque +16.9 Ft/lbs and improve throttle response without re-tuning the ECU.

HPS Intercooler Pipe Kit Features and Specification
- Made from lightweight mandrel bent aluminum tubing (2.5" OD for the HOT side, 2.75" OD for the Cold Side), the charge pipe kit has less bend and better air flow compared to the oem restrictive design
- Increase horsepower +17.1 Whp , torque +16.9 Ft/lbs and improve throttle response without re-tuning the ECU
- The bead rolled pipe ends prevent couplers from popping off under boost.
- Features HPS signature race proven high temp 4-ply reinforced silicone hoses and industrial grade 100% stainless steel T-bolt clamps
- Includes easy to follow step-by-step installation manual with clear pictures and instructions to guide the installer throughout the whole process.
- No modification is required during the installation. Does not trigger CEL light
- Color: Polish
- NOT CARB Compliant
- System Type: Intercooler Piping Kit (Hot and Cold Side)
- Vehicle Application: Fits 2015-2020 Ford Mustang Ecoboost 2.3L Turbo. Compatible with oem and aftermarket intercoolers utilizing factory oem intercooler piping.

- Deliver dyno proven performance gains increase 17.1 Whp horsepower, 16.9 Ft/lbs torque and improve throttle response; Does NOT require tuning after the install.
- Light weight mandrel-bent aluminum alloy piping replaces the stock restrictive piping (Hot and Cold Side). Bead rolled pipe ends prevent couplers from popping off under boost.
- Features HPS signature race proven high temp 4-ply reinforced silicone hoses and industrial grade 100% stainless steel T-bolt clamps.
- The included installation manual has clear pictures and instructions to guide the installer throughout the whole process. Bolt-on easy installation. No modification or tuning is required.
- Fits 2015-2020 Ford Mustang Ecoboost 2.3L Turbo. Compatible with oem and aftermarket intercoolers utilizing factory oem intercooler piping. NOT CARB Compliant
Color - Polish
Learn More

Setting out to replace the stock pipe, cp-e has not only managed to design an upgrade solution with an aluminum pipe, but has designed a solution with a 2.50” diameter pipe! Pushing the space to the max, cp-e wanted to bring the community the last hot side pipe they will need through all of their modifications.

cp-e™ is excited to release their Mustang EcoBoost Hot-Side Charge Pipe. This version is to be used along with the Exhale BOV kit.

Setting out to replace the stock pipe, cp-e has not only managed to design an upgrade solution with an aluminum pipe, but has designed a solution with a 2.50” diameter pipe! Pushing the space to the max, cp-e wanted to bring the community the last Mustang EcoBoost Hot-Side Charge Pipe they will need through all of their modifications.

This mandrel bent aluminum pipe supplies you with the volume, and the free flow that you need through all your modification goals and allows you to reach those goals in the path that YOU decide on. Being designed in CAD, CNC mandrel bent, and having laser cut aluminum brackets, you can be sure that you are buying a pipe that not only fits, but fits as well as stock.

cp-e™ has made the pipe with to provide the best flow possible while still having flexibility built in to move with the engine. To top it off, cp-e also supplies the necessary 4-ply silicone hoses and T-Bolt clamps to secure it all to the stock intercooler or the cp-e™ ΔCore Front Mount Intercooler!

Just a hot side pipe replacement not enough? Check out the BOV Upgrade Kit, and our Cold Side Pipe Upgrade Kit too!

Not California emissions compliant | No implied CARB certification | Off-road use only

CALIFORNIA WARNING:Cancer and Reproductive Harm – www.P65Warnings.ca.gov

Learn More

Setting out to replace the stock pipe, cp-e has not only managed to design an upgrade solution with an aluminum pipe, but has designed a solution with a 2.50” diameter pipe! Pushing the space to the max, cp-e wanted to bring the community the last hot side pipe they will need through all of their modifications.

Mustang EcoBoost Hot Charge Pipe
cp-e™ is excited to release their hot side charge pipe upgrades for the Mustang EcoBoost.

Setting out to replace the stock pipe, cp-e has not only managed to design an upgrade solution with an aluminum pipe, but has designed a solution with a 2.50” diameter pipe! Pushing the space to the max, cp-e wanted to bring the community the last Mustang EcoBoost Hot Charge Pipe they will need through all of their modifications.

This mandrel bent aluminum pipe supplies you with the volume, and the free flow that you need through all your modification goals and allows you to reach those goals in the path that YOU decide on. Being designed in CAD, CNC mandrel bent, and having laser cut aluminum brackets, you can be sure that you are buying a pipe that not only fits, but fits as well as stock.

cp-e™ has made the pipe with to provide the best flow possible while still having flexibility built in to move with the engine. To top it off, cp-e also supplies the necessary 4-ply silicone hoses and T-Bolt clamps to secure it all to the stock intercooler or the cp-e™ ΔCore Front Mount Intercooler!

Just a hot side pipe replacement not enough? Check out the BOV Upgrade Kit, and our Cold Side Pipe Upgrade Kit too!

Not California emissions compliant | No implied CARB certification | Off-road use only

CALIFORNIA WARNING:Cancer and Reproductive Harm – www.P65Warnings.ca.gov

Learn More

Setting out to replace the stock pipe, cp-e has not only managed to design an upgrade solution with an aluminum pipe, but has designed a solution with a 2.50” diameter pipe! Pushing the space to the max, cp-e wanted to bring the community the last hot side pipe they will need through all of their modifications.

Mustang EcoBoost Hot Charge Pipe
cp-e™ is excited to release their hot side charge pipe upgrades for the Mustang EcoBoost.

Setting out to replace the stock pipe, cp-e has not only managed to design an upgrade solution with an aluminum pipe, but has designed a solution with a 2.50” diameter pipe! Pushing the space to the max, cp-e wanted to bring the community the last Mustang EcoBoost Hot Charge Pipe they will need through all of their modifications.

This mandrel bent aluminum pipe supplies you with the volume, and the free flow that you need through all your modification goals and allows you to reach those goals in the path that YOU decide on. Being designed in CAD, CNC mandrel bent, and having laser cut aluminum brackets, you can be sure that you are buying a pipe that not only fits, but fits as well as stock.

cp-e™ has made the pipe with to provide the best flow possible while still having flexibility built in to move with the engine. To top it off, cp-e also supplies the necessary 4-ply silicone hoses and T-Bolt clamps to secure it all to the stock intercooler or the cp-e™ ΔCore Front Mount Intercooler!

Just a hot side pipe replacement not enough? Check out the BOV Upgrade Kit, and our Cold Side Pipe Upgrade Kit too!

Not California emissions compliant | No implied CARB certification | Off-road use only

CALIFORNIA WARNING:Cancer and Reproductive Harm – www.P65Warnings.ca.gov

Learn More