Mishimoto, the world leader in performance cooling products, is proud to introduce the intercooler piping kit for the 2015+ Ford Mustang EcoBoost.

Looking for a way to improve spool-up, increase power potential, and improve engine bay aesthetics on your EcoBoost Mustang? Mishimoto has you covered with a new cold-side intercooler pipe designed specifically for the 2015+ Ford Mustang EcoBoost. This EcoBoost Mustang kit features 2.75" mandrel-bent aluminum piping for smooth airflow, and four-layer silicone couplers with heat-resistant embedded fibers for improved tolerance against heat and pressure. The Mishimoto engineers include a CNC-Machined NPT bung near the throttle body for the easy addition of water/meth injection or a boost gauge. This 2015 Mustang kit also includes high-quality stainless steel T-bolt clamps for consistent and reliable holding power. Installation on your 2015 Mustang is simple, requires no modification to any parts in the engine bay, and can be completed in under 30 minutes. The Mishimoto Mustang EcoBoost Cold-Side Intercooler Pipe Kit is available in either polished or wrinkle black finish and like our entire line of Mustang parts, includes the Mishimoto Lifetime Warranty.

PIPE DIAMETER
2.75"

PURCHASE INCLUDES
(1) Aluminum Pipe w/ CNC-Machined NPT Bung
(2) Silicone Couplers
(1) 2.75" T-Bolt Clamps
(3) 3.0" T-Bolt Clamps
Mishimoto Lifetime Warranty

INSTALLATION TORQUE SPECS

27 in-lbs (3N*M) recommended for all t-bolt and constant tension t-bolt clamps. These clamps have an operating range of 18-35 in-lbs (2-4N*M). Do not exceed the maximum torque rating of 35 in-lbs (4N*M).

Learn More

Setting out to replace the stock pipe, cp-e has not only managed to design an upgrade solution with an aluminum pipe, but has designed a solution with a 2.50” diameter pipe! Pushing the space to the max, cp-e wanted to bring the community the last hot side pipe they will need through all of their modifications.

Mustang EcoBoost Hot Charge Pipe
cp-e™ is excited to release their hot side charge pipe upgrades for the Mustang EcoBoost.

Setting out to replace the stock pipe, cp-e has not only managed to design an upgrade solution with an aluminum pipe, but has designed a solution with a 2.50” diameter pipe! Pushing the space to the max, cp-e wanted to bring the community the last Mustang EcoBoost Hot Charge Pipe they will need through all of their modifications.

This mandrel bent aluminum pipe supplies you with the volume, and the free flow that you need through all your modification goals and allows you to reach those goals in the path that YOU decide on. Being designed in CAD, CNC mandrel bent, and having laser cut aluminum brackets, you can be sure that you are buying a pipe that not only fits, but fits as well as stock.

cp-e™ has made the pipe with to provide the best flow possible while still having flexibility built in to move with the engine. To top it off, cp-e also supplies the necessary 4-ply silicone hoses and T-Bolt clamps to secure it all to the stock intercooler or the cp-e™ ΔCore Front Mount Intercooler!

Just a hot side pipe replacement not enough? Check out the BOV Upgrade Kit, and our Cold Side Pipe Upgrade Kit too!

Not California emissions compliant | No implied CARB certification | Off-road use only

CALIFORNIA WARNING:Cancer and Reproductive Harm – www.P65Warnings.ca.gov

Learn More

Setting out to replace the stock pipe, cp-e has not only managed to design an upgrade solution with an aluminum pipe, but has designed a solution with a 2.50” diameter pipe! Pushing the space to the max, cp-e wanted to bring the community the last hot side pipe they will need through all of their modifications.

Mustang EcoBoost Hot Charge Pipe
cp-e™ is excited to release their hot side charge pipe upgrades for the Mustang EcoBoost.

Setting out to replace the stock pipe, cp-e has not only managed to design an upgrade solution with an aluminum pipe, but has designed a solution with a 2.50” diameter pipe! Pushing the space to the max, cp-e wanted to bring the community the last Mustang EcoBoost Hot Charge Pipe they will need through all of their modifications.

This mandrel bent aluminum pipe supplies you with the volume, and the free flow that you need through all your modification goals and allows you to reach those goals in the path that YOU decide on. Being designed in CAD, CNC mandrel bent, and having laser cut aluminum brackets, you can be sure that you are buying a pipe that not only fits, but fits as well as stock.

cp-e™ has made the pipe with to provide the best flow possible while still having flexibility built in to move with the engine. To top it off, cp-e also supplies the necessary 4-ply silicone hoses and T-Bolt clamps to secure it all to the stock intercooler or the cp-e™ ΔCore Front Mount Intercooler!

Just a hot side pipe replacement not enough? Check out the BOV Upgrade Kit, and our Cold Side Pipe Upgrade Kit too!

Not California emissions compliant | No implied CARB certification | Off-road use only

CALIFORNIA WARNING:Cancer and Reproductive Harm – www.P65Warnings.ca.gov

Learn More

Setting out to replace the stock pipe, cp-e has not only managed to design an upgrade solution with an aluminum pipe, but has designed a solution with a 2.50” diameter pipe! Pushing the space to the max, cp-e wanted to bring the community the last hot side pipe they will need through all of their modifications.

cp-e™ is excited to release their Mustang EcoBoost Hot-Side Charge Pipe. This version is to be used along with the Exhale BOV kit.

Setting out to replace the stock pipe, cp-e has not only managed to design an upgrade solution with an aluminum pipe, but has designed a solution with a 2.50” diameter pipe! Pushing the space to the max, cp-e wanted to bring the community the last Mustang EcoBoost Hot-Side Charge Pipe they will need through all of their modifications.

This mandrel bent aluminum pipe supplies you with the volume, and the free flow that you need through all your modification goals and allows you to reach those goals in the path that YOU decide on. Being designed in CAD, CNC mandrel bent, and having laser cut aluminum brackets, you can be sure that you are buying a pipe that not only fits, but fits as well as stock.

cp-e™ has made the pipe with to provide the best flow possible while still having flexibility built in to move with the engine. To top it off, cp-e also supplies the necessary 4-ply silicone hoses and T-Bolt clamps to secure it all to the stock intercooler or the cp-e™ ΔCore Front Mount Intercooler!

Just a hot side pipe replacement not enough? Check out the BOV Upgrade Kit, and our Cold Side Pipe Upgrade Kit too!

Not California emissions compliant | No implied CARB certification | Off-road use only

CALIFORNIA WARNING:Cancer and Reproductive Harm – www.P65Warnings.ca.gov

Learn More

Setting out to replace the stock pipe, cp-e has not only managed to design an upgrade solution with an aluminum pipe, but has designed a solution with a 2.50” diameter pipe! Pushing the space to the max, cp-e wanted to bring the community the last hot side pipe they will need through all of their modifications.

cp-e™ is excited to release their Mustang EcoBoost Hot-Side Charge Pipe. This version is to be used along with the Exhale BOV kit.

Setting out to replace the stock pipe, cp-e has not only managed to design an upgrade solution with an aluminum pipe, but has designed a solution with a 2.50” diameter pipe! Pushing the space to the max, cp-e wanted to bring the community the last Mustang EcoBoost Hot-Side Charge Pipe they will need through all of their modifications.

This mandrel bent aluminum pipe supplies you with the volume, and the free flow that you need through all your modification goals and allows you to reach those goals in the path that YOU decide on. Being designed in CAD, CNC mandrel bent, and having laser cut aluminum brackets, you can be sure that you are buying a pipe that not only fits, but fits as well as stock.

cp-e™ has made the pipe with to provide the best flow possible while still having flexibility built in to move with the engine. To top it off, cp-e also supplies the necessary 4-ply silicone hoses and T-Bolt clamps to secure it all to the stock intercooler or the cp-e™ ΔCore Front Mount Intercooler!

Just a hot side pipe replacement not enough? Check out the BOV Upgrade Kit, and our Cold Side Pipe Upgrade Kit too!

Not California emissions compliant | No implied CARB certification | Off-road use only

CALIFORNIA WARNING:Cancer and Reproductive Harm – www.P65Warnings.ca.gov

Learn More

Product Details:• Lightweight 6061-T1 Aluminum Piping
• Precision CNC machined BPV flange
• Stainless Steel Band Clamps with Inner Protective Liner
• Automotive Grade Silicone Couplers
• 1/8” NPT bung for Additional Sensor or Injection Port
• Increase Throttle Response and Decreases Turbo Lag
• Beaded Tube Ends to Help Prevent Couplers from Slipping Off • Mandrel-bent Tubing for Smooth Air Transition
• Uses all factory mounting locations
• Includes all necessary hardware for a hassle-free installation

Learn More

The AEM 26-3001C Intercooler Charge Pipe Kit is a set of two free-flowing, mandrel-bent aluminum tubes designed to replace the restrictive factory intercooler piping on specific turbo charged Ford Mustang EcoBoost models that supports a wide range of performance customization options. AEM charge pipes have been engineered to reduce turbo charged air pressure loss as well as dramatically increase air flow from the turbo to the intercooler. The specialized aerodynamic tube design produces a noticeable horsepower and acceleration gain from your engine. The hot charge pipe features a precision machined fitting that accommodates the factory BOV (blow-off valve). The cold charge pipe has two provisions for 1/8 inch NPT ports for you to optionally add either a water-methanol or a nitrous oxide injection system along with a temperature/boost sensor probe for these modifications. The AEM intercooler piping is constructed from lightweight aluminum with a durable gunmetal gray powder coated finish. For additional horsepower gains and improved engine compartment aesthetics, the AEM 21-740C Cold Air Intake System can be installed into your vehicle as well. The charge pipe kit is easy to install with commonly available tools and it is backed by AEM's Lifetime Limited Warranty. Some AEM charge pipe kits are not legal for sale or use in California and other states adopting California emission standards, while others are 50 state legal. View the 26-3001C vehicle applications to determine the legal status for each vehicle.