Details
RPS Camaro ZL1 SS 3.1" Release Bearing and Adapter (2012-2019 Camaro ZL1 V8 6.2) - TO-04LSA-ZL1
RPS Camaro ZL1 SS 3.1" Release Bearing and Adapter
RPS Release Bearing and Adapter ZL1 SS applications
RPS Release Bearing and Adapter Camaro ZL1 and SS applications. 3.10" tall.
Designed to be used on the stock Camaro Slave Cylinder for proper stack
height. This rps piston/bearing adapter is to be used with any of the RPS
Clutch Kits making up for the needed stack height replacement when removing
the factory dual mass flywheel. in past model manufacturers had you shim
out the slave cylinder to make up the stack height difference but on
several of the late madel GM applications you can no longer shim behind the
slave cylinder. RPS has designed this adapter with the larger bearging for
proper fitment with the RPS Kits. The adapter can be trimmed on the bottom
side to shorten it if need be to establish the proper air gap of .300-.350
required when using stock slave cylinders with the RPS clutch kits.
Fitment - 2012 - 2012 Chevrolet Camaro ZL1 V8 6.2
2013 - 2013 Chevrolet Camaro ZL1 V8 6.2
2014 - 2014 Chevrolet Camaro ZL1 V8 6.2
2015 - 2015 Chevrolet Camaro ZL1 V8 6.2
2017 - 2017 Chevrolet Camaro ZL1 V8 6.2
2018 - 2018 Chevrolet Camaro ZL1 V8 6.2
2019 - 2019 Chevrolet Camaro ZL1 V8 6.2
Lethal Performance is proud to offer the entire line of products!