Search results for 'griptec'

Ultra Lightweight Pulley Whipple kits early 2000 to current. Made from billet 7075-T6 aerospace grade aluminum. Stronger and harder than 6061 T6. This pulley is equipped with GripTec a micro machining technology. This technology allows the maximum grip force to be applied to the component and belt without damaging your belt. You wont have to worry about belt slip with GripTec. Get the maximum performance out of your supercharger.

Ribs: 10
Level 3 GripTecMaterial: 7075-T6 Aluminum
Color: Black
Finish: Type III Anodized
Learn More

Ultra Lightweight Pulley Whipple kits early 2000 to current. Made from billet 7075-T6 aerospace grade aluminum. Stronger and harder than 6061 T6. This pulley is equipped with GripTec a micro machining technology. This technology allows the maximum grip force to be applied to the component and belt without damaging your belt. You wont have to worry about belt slip with GripTec. Get the maximum performance out of your supercharger.

Ribs: 6
Level 3 GripTecMaterial: 7075-T6 Aluminum
Color: Black
Finish: Type III Anodized
Learn More

Ultra Lightweight Pulley Whipple kits early 2000 to current. Made from billet 7075-T6 aerospace grade aluminum. Stronger and harder than 6061 T6. This pulley is equipped with GripTec a micro machining technology. This technology allows the maximum grip force to be applied to the component and belt without damaging your belt. You wont have to worry about belt slip with GripTec. Get the maximum performance out of your supercharger.

Ribs: 8
Level 3 GripTecMaterial: 7075-T6 Aluminum
Color: Black
Finish: Type III Anodized
Learn More

Our 2 Piece pulley system for Vortech / Paxton Superchargers offers some additional features not found on other pulleys. Our 2 Piece design allows for easier removal and installation in tight spaces often found on under the hood systems. Not all kits have space limitations, our 2 piece design will make any installer happy that they wont behaving to deal with the key-way every time they are swapping a pulley.

Ribs: 6
Level 3 GripTecMaterial: 7075-T6 Aluminum
Color: Black
Finish: Type III Anodized
Hub: 2pc V-Tec Ref PN: HU1V20MM316 (Included)

HUB KEYWAYS:

TYPICALLY Paxton 1000/2000 are OLDER style but still check keyway.

7/8" x dual keyway (older than 2012) / 20mm x single keyway (newer than 2012)

Learn More

Our 2 Piece pulley system for Vortech / Paxton Superchargers offers some additional features not found on other pulleys. Our 2 Piece design allows for easier removal and installation in tight spaces often found on under the hood systems. Not all kits have space limitations, our 2 piece design will make any installer happy that they wont behaving to deal with the key-way every time they are swapping a pulley.

Ribs: 8
Level 3 GripTecMaterial: 7075-T6 Aluminum
Color: Black
Finish: Type III Anodized
Hub: 2pc V-Tec Ref PN: HU1V20MM316 (Included)

HUB KEYWAYS:

TYPICALLY Paxton 1000/2000 are OLDER style but still check keyway.

7/8" x dual keyway (older than 2012) / 20mm x single keyway (newer than 2012)

Learn More

Our 2 Piece pulley system for Procharger Superchargers offers some additional features not found on other pulleys. Our 2 Piece design allows for easier removal and installation in tight spaces often found on under the hood systems. Not all kits have space limitations, our 2 piece design will make any installer happy that they wont behaving to deal with the key-way every time they are swapping a pulley.

Ribs: 6
Level 3 GripTecMaterial: 7075-T6 Aluminum
Color: Black
Finish: Type III Anodized
Hub: 2pc Pro Charger Ref PN: HU1P0875316 Included in this Kit.
Learn More

Our 2 Piece pulley system for Procharger Superchargers offers some additional features not found on other pulleys. Our 2 Piece design allows for easier removal and installation in tight spaces often found on under the hood systems. Not all kits have space limitations, our 2 piece design will make any installer happy that they wont behaving to deal with the key-way every time they are swapping a pulley.

Ribs: 8
Level 3 GripTecMaterial: 7075-T6 Aluminum
Color: Black
Finish: Type III Anodized
Hub: 2pc Pro Charger Ref PN: HU1P0875316 Included in this Kit.
Learn More

Ultra Lightweight Pulley for Edelbrock TVS. Made from billet 7075-T6 aerospace grade aluminum. Stronger and harder than 6061 T6. This pulley is equipped with GripTec a micro machining technology. This technology allows the maximum grip force to be applied to the component and belt without damaging your belt. You wont have to worry about belt slip with GripTec™. Get the maximum performance out of your supercharger.

Grip Level: 3
Color: Black
Ribs: 8
Finish: Type III Anodized, Class 2, Hard Coat
Learn More

Ultra Lightweight Pulley for Edelbrock TVS. Made from billet 7075-T6 aerospace grade aluminum. Stronger and harder than 6061 T6. This pulley is equipped with GripTec a micro machining technology. This technology allows the maximum grip force to be applied to the component and belt without damaging your belt. You wont have to worry about belt slip with GripTec™. Get the maximum performance out of your supercharger.

Grip Level: 3
Color: Black
Ribs: 6
Finish: Type III Anodized, Class 2, Hard Coat
Learn More

Ultra Lightweight Pulley for Edelbrock TVS. Made from billet 7075-T6 aerospace grade aluminum. Stronger and harder than 6061 T6. This pulley is equipped with GripTec a micro machining technology. This technology allows the maximum grip force to be applied to the component and belt without damaging your belt. You wont have to worry about belt slip with GripTec™. Get the maximum performance out of your supercharger.

Grip Level: 3
Color: Black
Ribs: 10
Finish: Type III Anodized, Class 2, Hard Coat
Learn More

Ultra Lightweight TVS Pulleys for the 2.3L (TVS Roush / VMP / Ford Performance). Made from billet 7075-T6 aerospace grade aluminum. Stronger and harder than 6061 T6. This pulley is equipped with GripTec™ a micro machining technology. This technology allows the maximum grip force to be applied to the component and belt without damaging your belt. You wont have to worry about belt slip with GripTec. Get the maximum performance out of your supercharger.

Ribs: 6, 8 or 10 Rib
Level 3 GripTec®
Material: 7075-T6 Aluminum
Color: Black
Finish: Type III Anodized

2011-2014 Mustangs with the OEM Roush TVS are required to machine the snout of the supercharger to fit anything smaller than a 69mm pulley. Machining of the snout is not required for VMP 2.3L superchargersLearn More

Ultra Lightweight TVS Pulleys for the 2.65L TVS (Roush / VMP / Ford Performance). Made from billet 7075-T6 aerospace grade aluminum. Stronger and harder than 6061 T6. This pulley is equipped with GripTec™ a micro machining technology. This technology allows the maximum grip force to be applied to the component and belt without damaging your belt. You wont have to worry about belt slip with GripTec. Get the maximum performance out of your supercharger.

Ribs: 6, 8 or 10 Rib
Level 3 GripTec®
Material: 7075-T6 Aluminum
Color: Black
Finish: Type III Anodized
Learn More

We're proud to announce the release of the Lethal Performance by Griptec supercharger pulley kit for the all new 2020 Shelby GT500. From the factory the new Shelby GT500 comes with a 3.085" supercharger pulley which makes an estimated 12psi of boost. We worked closely with our friends over at Griptec to come up with a interchangeable pulley kit which uses a hub and ring design giving the customer several options in pulley sizes to choose the boost level you're wanting to make. Each Lethal Performance by Griptec pulley kit comes with the supercharger hub, supercharger pulley ring and the hardware needed to install the ring onto the hub. The rings are being offered in sizes from 2.35" through 3.15". What can you expect from this kit? More boost, more horsepower and more torque for your 2020 Shelby GT500.

Product Features:
Hub and Ring Design
Pulley Ring Sizes from 2.35" to 3.15"
Increased Boost
More Horsepower
More Torque
Necessary Hardware for Installation Included
Pulley Installation Tool Required for Installation (Sold Separately)
Anaerobic Sealant Required for InstallationLearn More

Looking to make more horsepower and torque with your Charger, Challenger, Hellcat or Demon? The Griptec V2 supercharger pulley kit will do just that. Choose from the different size pulleys offered to increase your boost level to your specific goals.

ZPE uses two patented processes to increase surface grip: GripTec Micro and GripTec Weld.

GripTec Micro is a CNC ablation process which removes material from the surface of the pulley where the belt would sit.

GripTec Weld is a micro welding process in which material is added to the surface.

Both of these processes serve to increase the pulley's grip potential by increasing the friction between the pulley and belt using an engineered grip pattern, thereby eliminating slip.

Gates K100572HD belt works well with the 2.75 and 2.85 pulleys and stock crank pulley (15-16psi).
Gates K100594HD belt works well with the 2.75" and 2.85 pulleys and ATI Crank pulley (17-18psi).
The 2.85 Pulley works perfect with Mopar Demon fuel injectors. The 2.75 may require larger fuel injectors. We recommend the ID1050x
Custom tuning IS required.
Learn More

Our 2 Piece pulley system for Procharger Superchargers offers some additional features not found on other pulleys. Our 2 Piece design allows for easier removal and installation in tight spaces often found on under the hood systems. Not all kits have space limitations, our 2 piece design will make any installer happy that they wont behaving to deal with the key-way every time they are swapping a pulley.

Ribs: 10
Level 3 GripTecMaterial: 7075-T6 Aluminum
Color: Black
Finish: Type III Anodized
Hub: 2pc Pro Charger Ref PN: HU1P0875316 Included in this Kit.
Learn More

Griptec 2020 Shelby GT500 Pulley Install / Removal ToolLearn More

We're proud to announce the release of the Lethal Performance by Griptec supercharger pulley kit for the all new 2020 Shelby GT500. From the factory the new Shelby GT500 comes with a 3.085" supercharger pulley which makes an estimated 12psi of boost. We worked closely with our friends over at Griptec to come up with a interchangeable pulley kit which uses a hub and ring design giving the customer several options in pulley sizes to choose the boost level you're wanting to make. Each Lethal Performance by Griptec pulley kit comes with the supercharger hub, supercharger pulley ring and the hardware needed to install the ring onto the hub. The rings are being offered in sizes from 2.35" through 3.15". What can you expect from this kit? More boost, more horsepower and more torque for your 2020 Shelby GT500.

For every .10 smaller in pulley diameter we expect to see 1psi increase in boost.

Product Features:
Pulley Ring Only
Pulley Ring Sizes from 2.35" to 3.15"
Increased Boost
More Horsepower
More Torque
Necessary Hardware for Installation Included
Pulley Installation Tool Required for Installation (Sold Separately)
Anaerobic Sealant Required for InstallationLearn More

We're proud to announce the release of the Lethal Performance by Griptec supercharger pulley kit for the all new 2020 Shelby GT500. From the factory the new Shelby GT500 comes with a 3.085" supercharger pulley which makes an estimated 12psi of boost. We worked closely with our friends over at Griptec to come up with a interchangeable pulley kit which uses a hub and ring design giving the customer several options in pulley sizes to choose the boost level you're wanting to make. Each Lethal Performance by Griptec pulley kit comes with the supercharger hub, supercharger pulley ring and the hardware needed to install the ring onto the hub. The rings are being offered in sizes from 2.35" through 3.15". What can you expect from this kit? More boost, more horsepower and more torque for your 2020 Shelby GT500.

For every .10 smaller in pulley diameter we expect to see 1psi increase in boost.

Product Features:
Pulley Hub Only
Pulley Ring Sizes from 2.35" to 3.15"
Increased Boost
More Horsepower
More Torque
Necessary Hardware for Installation Included
Pulley Installation Tool Required for Installation (Sold Separately)
Anaerobic Sealant Required for InstallationLearn More

Our 2 Piece pulley system for Vortech / Paxton Superchargers offers some additional features not found on other pulleys. Our 2 Piece design allows for easier removal and installation in tight spaces often found on under the hood systems. Not all kits have space limitations, our 2 piece design will make any installer happy that they wont behaving to deal with the key-way every time they are swapping a pulley.

Ribs: 8
Level 3 GripTecMaterial: 7075-T6 Aluminum
Color: Black
Finish: Type III Anodized
Hub: 2pc V-Tec Ref PN: HU1V20MM316 (Included)
Learn More

Our 2 Piece pulley system for Procharger Superchargers offers some additional features not found on other pulleys. Our 2 Piece design allows for easier removal and installation in tight spaces often found on under the hood systems. Not all kits have space limitations, our 2 piece design will make any installer happy that they wont behaving to deal with the key-way every time they are swapping a pulley.

Ribs: 6
Level 3 GripTecMaterial: 7075-T6 Aluminum
Color: Black
Finish: Type III Anodized
Hub: 2pc Pro Charger Ref PN: HU1P0875316 Included in this Kit.
Learn More

Your Choice of 2018+ Mustang GT Compatible Cold Air Intake Systems

- AND -

HP Tuners RTD (Remote Tune Device)

• Compact Interface designed for flashing tunes and data logging
• Supports use of VCM Scanner for data logging, diagnostics, DTCs, and Scanning
• RTD requires credits based on vehicle to be purchased.  All Lethal Power Packs and tune packages include credits in the price.
• A windows laptop is required to flash your vehicle or create log files.
• Note: RTD is for flashing and logging and does NOT support VCM Editor.

Lund Racing Tune

• Lund Racing Custom Tunes are created specific to your vehicle based on your exact modifications In order to provide as much power as safely as possible.
• You will be required to fill out a tune request form with any other vehicle modifications before a tune is provided to you.
• Lund charges additional fees for certain modifications.  This package assumes that there are no other major modifications on your vehicle.
• Includes 6 months of "peace of mind" assisntance with Lund.  

Learn More

We're proud to announce the release of the Lethal Performance by Griptec supercharger pulley kit for the all new 2020 Shelby GT500. From the factory the new Shelby GT500 comes with a 3.085" supercharger pulley which makes an estimated 12psi of boost. We worked closely with our friends over at Griptec to come up with a interchangeable pulley kit which uses a hub and ring design giving the customer several options in pulley sizes to choose the boost level you're wanting to make. Each Lethal Performance by Griptec pulley kit comes with the supercharger hub, supercharger pulley ring and the hardware needed to install the ring onto the hub. The rings are being offered in sizes from 2.35" through 3.15". What can you expect from this kit? More boost, more horsepower and more torque for your 2020 Shelby GT500.

Product Features:
Hub and Ring Design
Pulley Ring Sizes from 2.35" to 3.15"
Increased Boost
More Horsepower
More Torque
Necessary Hardware for Installation Included
Pulley Installation Tool Required for Installation
Anaerobic Sealant Required for InstallationLearn More

Your Choice of 2018+ Mustang GT Compatible Cold Air Intake Systems

- AND -

HP Tuners RTD (Remote Tune Device)

• Compact Interface designed for flashing tunes and data logging
• Supports use of VCM Scanner for data logging, diagnostics, DTCs, and Scanning
• RTD requires credits based on vehicle to be purchased.  All Lethal Power Packs and tune packages include credits in the price.
• A windows laptop is required to flash your vehicle or create log files.
• Note: RTD is for flashing and logging and does NOT support VCM Editor.

Lund Racing Tune

• Lund Racing Custom Tunes are created specific to your vehicle based on your exact modifications In order to provide as much power as safely as possible.
• You will be required to fill out a tune request form with any other vehicle modifications before a tune is provided to you.
• Lund charges additional fees for certain modifications.  This package assumes that there are no other major modifications on your vehicle.
• Includes 6 months of "peace of mind" assisntance with Lund.  

Learn More

ZPE 2 Piece Griptec® pulley/system for Vortech Superchargers. This pulley is equipped with Griptec® a micro machining technology. This technology allows the maximum grip force to be applied to the pulley(s) and belt without adversely effecting your drive belt. Our Pulleys and Hubs are made from billet 7075 T6 Aluminum. This grade of Aluminum is much stronger and harder than billet 6061-T6. This gives us a strength similar to steel but with the light weight performance of Aluminum, further we hard anodize our parts for additional protection. This combination gives us the best that each material has to offer in strong light weight and tough component. Our 2 piece system offers some additional features not found on other pulley systems. Our 2 Piece design allows for easy removal and installation in tight spaces. Space constraints are often found on reverse mount systems or small chassis setups. Not all kits have space limitations, there is another great feature our 2 piece systems offers up. That feature is adaptability for unique and custom offsets. Special offsets are often found in supercharger unit upgrades or custom race brackets. We bring the entire line up of Griptec® 2 piece pulleys to be adapted to a easily movable offset in a low cost solution, supporting super-fast production times to help get your supercharge setup aligned and ready for your boost goals. The ZPE 2 piece design will also reduce or even eliminate having to repeatedly deal with key-ways every time when swapping pulleys. When our hub/receiver is mounted it does not need to be removed for pulley swaps. Pulley swaps are easy with 6 easy to change M6 screws. Always use Blue Loctite and use proper install tools to correctly TQ to 6-7 ft-lbs. Pro Install Tips: Before installing you new pulley you may want to verify your pulleys alignment referencing your original pulley with the new Gritpec® Pulley. If you wish to know more about how to do this chose from the Links. Pulley_vs_Pulley_Check.pdf Or Pulley_Vs_Pulley_Check_Video For the Stainless socket cap screws use a 5mm allen wrench. Tq M6 Screws to 6-7 Ft-Lb Do not use impacts for torqueing the pulleys hardware. We recommend a proper calibrated tq wrench. Over torqueing can lead to hardware failure. When swapping multiple pulleys/rings for different setups, inspect the dried Loctite and remove excess cured Loctite before re applying new Loctite. This will ensure that the new Loctite cures and bonds to the screws and hub/receiver. Using a right angle pick, light wire brush or pipe cleaner helps removed buildup of old Loctite. Follow your superchargers recommended TQ spec for the retention bolt or nut. We recommend using Loctite Blue or Red depending on your requirements. Don’t use an impact on the main shaft bolt/nut for the Hub/Receiver over torqueing can cause deformation of the hub or damage your shaft. Other useful info. You can reuse your keyway. For Vortech systems the Keys are usually 3/16 key stock. Some factory pulleys may have only one Key. Our new Receiver is prepped with 2 keys for versions that use 2 keys. This extra Key slot will not affect anything if not being used. Always use Blue Loctite and use proper install tools to correctly TQ to 6-7 ft-lbs. Our Stainless hardware for our M6 thread is a M6x1.0 by14mm length. Our Votech pulleys come standard with our Level 3 Griptec®.Learn More

Details:
VMP Performance 2.4” 10-rib bolt-on supercharger pulley
Griptec L3 finish on ribs and black anodizing
American made with high-quality anodized aluminum construction
Utilizes VMP’s 6-bolt hub pattern
Fits ‘07-‘14 TVS supercharged Ford Shelby GT500 Mustangs and 5.0 L with 10-rib conversion
Requires hub and nose drive modification to fit Roush head units
As a general rule, 1 PSI boost is equivalent to 3 mm or .1” in pulley Size
Includes (1) bolt-on pulley

The first to offer an aftermarket GT500 pulley made to OEM specifications, VMP is proud of its growing line of pulleys.

Manufactured in the USA, using high-quality anodized aluminum, VMP’s 2.4” pulley is made with strength and durability in mind. Precision machined, this pulley has an excellent fit. Learn More

Fits HellCat including new Demon. GripTec® = Level V2 (Coated) Hub: ZPE HCat (8 Bolt M5 Titanium screws included) Ribs = 10 Color: Black Finish: Type III Anodized, Class 2, Hard Coat Size: 2.78" Inch Or Size: 70.612 mmLearn More

Fits HellCat including new Demon. GripTec® = Level V2 (Coated) Hub: ZPE HCat (8 Bolt M5 Titanium screws included) Ribs = 10 Color: Black Finish: Type III Anodized, Class 2, Hard Coat Size: 2.78" Inch Or Size: 70.612 mmLearn More

VMP Tuning 2.5" Griptec 10-rib bolt-on pulley for TVS superchgd Mustang GT500 & 5.0 L (2007-2014 Mustang Shelby GT500) - 25-10-B-GR

At VMP Performance the need for speed meets modern technology. Today, VMP operates a modern e-commerce business focused on aftermarket automotive upgrades with customers all over the world.

WILL ADDING A SUPERCHARGER TO MY GT OR UPGRADING MY FACTORY SUPERCHARGER ON MY COBRA, ROUSH, OR GT500 WITH A VMP TVS SUPERCHARGER RUIN MY DRIVABILITY OR ON ROAD MANNERS? Nope. Notice, we said upgrade! With our expert tuning staff and the hours of R&
D that have gone into all of our kits, we have painstakingly developed kits that help you achieve your power goals without losing drivability and the road manners you are accustomed to in the modern Mustang, GT500, and F-150.

VMP operates a modern e-commerce business focused on aftermarket automotive upgrades with customers all over the world. The company?s headquarters are in New Smyrna Beach Florida on a 12 acre campus. VMP offers custom tuning and installations in addition to the line of VMP performance parts and supporting components from quality manufacturers.

Learn More

VMP Tuning 2.6" Griptec 10-rib bolt-on pulley for TVS superchgd Mustang GT500 & 5.0 L (2007-2014 Mustang Shelby GT500) - 26-10-B-GR

At VMP Performance the need for speed meets modern technology. Today, VMP operates a modern e-commerce business focused on aftermarket automotive upgrades with customers all over the world.

WILL ADDING A SUPERCHARGER TO MY GT OR UPGRADING MY FACTORY SUPERCHARGER ON MY COBRA, ROUSH, OR GT500 WITH A VMP TVS SUPERCHARGER RUIN MY DRIVABILITY OR ON ROAD MANNERS? Nope. Notice, we said upgrade! With our expert tuning staff and the hours of R&
D that have gone into all of our kits, we have painstakingly developed kits that help you achieve your power goals without losing drivability and the road manners you are accustomed to in the modern Mustang, GT500, and F-150.

VMP operates a modern e-commerce business focused on aftermarket automotive upgrades with customers all over the world. The company?s headquarters are in New Smyrna Beach Florida on a 12 acre campus. VMP offers custom tuning and installations in addition to the line of VMP performance parts and supporting components from quality manufacturers.

Learn More

VMP Tuning 2.7" Griptec 10-rib bolt-on pulley for TVS superchgd Mustang GT500 & 5.0 L (2007-2014 Mustang Shelby GT500) - 27-10-B-GR

At VMP Performance the need for speed meets modern technology. Today, VMP operates a modern e-commerce business focused on aftermarket automotive upgrades with customers all over the world.

WILL ADDING A SUPERCHARGER TO MY GT OR UPGRADING MY FACTORY SUPERCHARGER ON MY COBRA, ROUSH, OR GT500 WITH A VMP TVS SUPERCHARGER RUIN MY DRIVABILITY OR ON ROAD MANNERS? Nope. Notice, we said upgrade! With our expert tuning staff and the hours of R&
D that have gone into all of our kits, we have painstakingly developed kits that help you achieve your power goals without losing drivability and the road manners you are accustomed to in the modern Mustang, GT500, and F-150.

VMP operates a modern e-commerce business focused on aftermarket automotive upgrades with customers all over the world. The company?s headquarters are in New Smyrna Beach Florida on a 12 acre campus. VMP offers custom tuning and installations in addition to the line of VMP performance parts and supporting components from quality manufacturers.

Learn More

VMP Tuning 2.8" Griptec 10-rib bolt-on pulley for TVS superchgd Mustang GT500 & 5.0 L (2007-2014 Mustang Shelby GT500) - 28-10-B-GR

At VMP Performance the need for speed meets modern technology. Today, VMP operates a modern e-commerce business focused on aftermarket automotive upgrades with customers all over the world.

WILL ADDING A SUPERCHARGER TO MY GT OR UPGRADING MY FACTORY SUPERCHARGER ON MY COBRA, ROUSH, OR GT500 WITH A VMP TVS SUPERCHARGER RUIN MY DRIVABILITY OR ON ROAD MANNERS? Nope. Notice, we said upgrade! With our expert tuning staff and the hours of R&
D that have gone into all of our kits, we have painstakingly developed kits that help you achieve your power goals without losing drivability and the road manners you are accustomed to in the modern Mustang, GT500, and F-150.

VMP operates a modern e-commerce business focused on aftermarket automotive upgrades with customers all over the world. The company?s headquarters are in New Smyrna Beach Florida on a 12 acre campus. VMP offers custom tuning and installations in addition to the line of VMP performance parts and supporting components from quality manufacturers.

Learn More

VMP Tuning 2.9" Griptec 10-rib bolt-on pulley for TVS superchgd Mustang GT500 & 5.0 L (2007-2014 Mustang Shelby GT500) - 29-10-B-GR

At VMP Performance the need for speed meets modern technology. Today, VMP operates a modern e-commerce business focused on aftermarket automotive upgrades with customers all over the world.

WILL ADDING A SUPERCHARGER TO MY GT OR UPGRADING MY FACTORY SUPERCHARGER ON MY COBRA, ROUSH, OR GT500 WITH A VMP TVS SUPERCHARGER RUIN MY DRIVABILITY OR ON ROAD MANNERS? Nope. Notice, we said upgrade! With our expert tuning staff and the hours of R&
D that have gone into all of our kits, we have painstakingly developed kits that help you achieve your power goals without losing drivability and the road manners you are accustomed to in the modern Mustang, GT500, and F-150.

VMP operates a modern e-commerce business focused on aftermarket automotive upgrades with customers all over the world. The company?s headquarters are in New Smyrna Beach Florida on a 12 acre campus. VMP offers custom tuning and installations in addition to the line of VMP performance parts and supporting components from quality manufacturers.

Learn More

VMP Tuning 2.4" Griptec 8-Rib Pulley for Odin or Predator Front-Feed TVS Supercharger (2018-2022 Mustang) - 24-8-F-GR

VMP Griptec 8-Rib pulley for Odin or Predator front-feed TVS supercharger and 6-bolt hub Griptec L3 coating for reduced belt slip Stainless Steel Construction Laser-etched with size use with pulley bolts M6 x 14mm VMP-SUA017 Works with Odin superchargers that are running the VMP 8-rib conversion VMP-SUP021 and VMP-SUP022 Maintains the correct belt alignment with ATI/ VMP balancers VMP-918075 and VMP-918076 hub spacer not required

WILL ADDING A SUPERCHARGER TO MY GT OR UPGRADING MY FACTORY SUPERCHARGER ON MY COBRA, ROUSH, OR GT500 WITH A VMP TVS SUPERCHARGER RUIN MY DRIVABILITY OR ON ROAD MANNERS? Nope. Notice, we said upgrade! With our expert tuning staff and the hours of R&
D that have gone into all of our kits, we have painstakingly developed kits that help you achieve your power goals without losing drivability and the road manners you are accustomed to in the modern Mustang, GT500, and F-150.

VMP operates a modern e-commerce business focused on aftermarket automotive upgrades with customers all over the world. The company?s headquarters are in New Smyrna Beach Florida on a 12 acre campus. VMP offers custom tuning and installations in addition to the line of VMP performance parts and supporting components from quality manufacturers.

Learn More

VMP Tuning 66 mm (2.5") 6-rib Griptec pulley for 2011-2017 5.0 L (2011-2017 Mustang) - 25-6-B-GR

At VMP Performance the need for speed meets modern technology. Today, VMP operates a modern e-commerce business focused on aftermarket automotive upgrades with customers all over the world.

WILL ADDING A SUPERCHARGER TO MY GT OR UPGRADING MY FACTORY SUPERCHARGER ON MY COBRA, ROUSH, OR GT500 WITH A VMP TVS SUPERCHARGER RUIN MY DRIVABILITY OR ON ROAD MANNERS? Nope. Notice, we said upgrade! With our expert tuning staff and the hours of R&
D that have gone into all of our kits, we have painstakingly developed kits that help you achieve your power goals without losing drivability and the road manners you are accustomed to in the modern Mustang, GT500, and F-150.

VMP operates a modern e-commerce business focused on aftermarket automotive upgrades with customers all over the world. The company?s headquarters are in New Smyrna Beach Florida on a 12 acre campus. VMP offers custom tuning and installations in addition to the line of VMP performance parts and supporting components from quality manufacturers.

Learn More

VMP Tuning 2.5" Griptec 8-Rib Pulley for Odin or Predator Front-Feed TVS Supercharger (2018-2022 Mustang) - 25-8-F-GR

VMP Griptec 8-Rib pulley for Odin or Predator front-feed TVS supercharger and 6-bolt hub Griptec L3 coating for reduced belt slip Lightweight 6061 T6 aluminum Black anodized Laser-etched with size use with pulley bolts M6 x 14mm VMP-SUA017 Works with Odin superchargers that are running the VMP 8-rib conversion VMP-SUP021 and VMP-SUP022 Maintains the correct belt alignment with ATI/ VMP balancers VMP-918075 and VMP-918076 hub spacer not required

WILL ADDING A SUPERCHARGER TO MY GT OR UPGRADING MY FACTORY SUPERCHARGER ON MY COBRA, ROUSH, OR GT500 WITH A VMP TVS SUPERCHARGER RUIN MY DRIVABILITY OR ON ROAD MANNERS? Nope. Notice, we said upgrade! With our expert tuning staff and the hours of R&
D that have gone into all of our kits, we have painstakingly developed kits that help you achieve your power goals without losing drivability and the road manners you are accustomed to in the modern Mustang, GT500, and F-150.

VMP operates a modern e-commerce business focused on aftermarket automotive upgrades with customers all over the world. The company?s headquarters are in New Smyrna Beach Florida on a 12 acre campus. VMP offers custom tuning and installations in addition to the line of VMP performance parts and supporting components from quality manufacturers.

Learn More

VMP Tuning 69 mm (2.6") 6-rib Griptec pulley for 2011-2017 5.0 L (2011-2017 Mustang) - 26-6-B-GR

At VMP Performance the need for speed meets modern technology. Today, VMP operates a modern e-commerce business focused on aftermarket automotive upgrades with customers all over the world.

WILL ADDING A SUPERCHARGER TO MY GT OR UPGRADING MY FACTORY SUPERCHARGER ON MY COBRA, ROUSH, OR GT500 WITH A VMP TVS SUPERCHARGER RUIN MY DRIVABILITY OR ON ROAD MANNERS? Nope. Notice, we said upgrade! With our expert tuning staff and the hours of R&
D that have gone into all of our kits, we have painstakingly developed kits that help you achieve your power goals without losing drivability and the road manners you are accustomed to in the modern Mustang, GT500, and F-150.

VMP operates a modern e-commerce business focused on aftermarket automotive upgrades with customers all over the world. The company?s headquarters are in New Smyrna Beach Florida on a 12 acre campus. VMP offers custom tuning and installations in addition to the line of VMP performance parts and supporting components from quality manufacturers.

Learn More

VMP Tuning 2.6" Griptec 8-Rib Pulley for Odin or Predator Front-Feed TVS Supercharger (2018-2022 Mustang) - 26-8-F-GR

VMP Griptec 8-Rib pulley for Odin or Predator front-feed TVS supercharger and 6-bolt hub Griptec L3 coating for reduced belt slip Lightweight 6061 T6 aluminum Black anodized Laser-etched with size use with pulley bolts M6 x 14mm VMP-SUA017 Works with Odin superchargers that are running the VMP 8-rib conversion VMP-SUP021 and VMP-SUP022 Maintains the correct belt alignment with ATI/ VMP balancers VMP-918075 and VMP-918076 hub spacer not required

WILL ADDING A SUPERCHARGER TO MY GT OR UPGRADING MY FACTORY SUPERCHARGER ON MY COBRA, ROUSH, OR GT500 WITH A VMP TVS SUPERCHARGER RUIN MY DRIVABILITY OR ON ROAD MANNERS? Nope. Notice, we said upgrade! With our expert tuning staff and the hours of R&
D that have gone into all of our kits, we have painstakingly developed kits that help you achieve your power goals without losing drivability and the road manners you are accustomed to in the modern Mustang, GT500, and F-150.

VMP operates a modern e-commerce business focused on aftermarket automotive upgrades with customers all over the world. The company?s headquarters are in New Smyrna Beach Florida on a 12 acre campus. VMP offers custom tuning and installations in addition to the line of VMP performance parts and supporting components from quality manufacturers.

Learn More

VMP Tuning 2.7" Griptec 6-Rib Pulley for 5.0 L TVS Supercharger - 27-6-B-GR

VMP Performance 2.7" 6-rib bolt-on supercharger pulley for VMP TVS supercharger kits. GripTec L3 finish on ribs and black anodizingAmerican made with high-quality anodized aluminum construction. Utilizes 6-bolt hub pattern. Fits VMP, Roush, and Odin superchargers. It is recommended to use race fuel with this pulley. Injector and fuel pump upgrades are required. As a general rule, 1 PSI boost is equivalent to 3 mm or .1 in pulley sizeIncludes (1) bolt-on pulley VMP is proud of its growing line of pulleys. GripTec Micro technology is a micro ablation machining process applied to the ribs of the pulley giving them maximum gripping force. The multi-directional machined ridges minimize belt slippage. Manufactured in the USA, using high-quality anodized aluminum, VMP's pulley is made with strength and durability in mind. Precision machined, this pulley has an excellent fit. Hub NOT included.

WILL ADDING A SUPERCHARGER TO MY GT OR UPGRADING MY FACTORY SUPERCHARGER ON MY COBRA, ROUSH, OR GT500 WITH A VMP TVS SUPERCHARGER RUIN MY DRIVABILITY OR ON ROAD MANNERS? Nope. Notice, we said upgrade! With our expert tuning staff and the hours of R&
D that have gone into all of our kits, we have painstakingly developed kits that help you achieve your power goals without losing drivability and the road manners you are accustomed to in the modern Mustang, GT500, and F-150.

VMP operates a modern e-commerce business focused on aftermarket automotive upgrades with customers all over the world. The company?s headquarters are in New Smyrna Beach Florida on a 12 acre campus. VMP offers custom tuning and installations in addition to the line of VMP performance parts and supporting components from quality manufacturers.

Learn More

VMP Tuning 2.7" Griptec 8-Rib Pulley for Odin or Predator Front-Feed TVS Supercharger (2018-2022 Mustang) - 27-8-F-GR

VMP Griptec 8-Rib pulley for Odin or Predator front-feed TVS supercharger and 6-bolt hub Griptec L3 coating for reduced belt slip Lightweight 6061 T6 aluminum Black anodized Laser-etched with size use with pulley bolts M6 x 14mm VMP-SUA017 Works with Odin superchargers that are running the VMP 8-rib conversion VMP-SUP021 and VMP-SUP022 Maintains the correct belt alignment with ATI/ VMP balancers VMP-918075 and VMP-918076 hub spacer not required

WILL ADDING A SUPERCHARGER TO MY GT OR UPGRADING MY FACTORY SUPERCHARGER ON MY COBRA, ROUSH, OR GT500 WITH A VMP TVS SUPERCHARGER RUIN MY DRIVABILITY OR ON ROAD MANNERS? Nope. Notice, we said upgrade! With our expert tuning staff and the hours of R&
D that have gone into all of our kits, we have painstakingly developed kits that help you achieve your power goals without losing drivability and the road manners you are accustomed to in the modern Mustang, GT500, and F-150.

VMP operates a modern e-commerce business focused on aftermarket automotive upgrades with customers all over the world. The company?s headquarters are in New Smyrna Beach Florida on a 12 acre campus. VMP offers custom tuning and installations in addition to the line of VMP performance parts and supporting components from quality manufacturers.

Learn More

VMP Tuning 2.8" Griptec 6-Rib Pulley for 5.0 L TVS Supercharger - 28-6-B-GR

VMP Performance 2.8" 6-rib bolt-on supercharger pulley for VMP TVS supercharger kits. GripTec L3 finish on ribs and black anodizingAmerican made with high-quality anodized aluminum constructionUtilizes 6-bolt hub pattern. Fits VMP, Roush, and Odin superchargers. It is recommended to use race fuel with this pulley. Injector and fuel pump upgrades are required. As a general rule, 1 PSI boost is equivalent to 3 mm or .1 in pulley sizeIncludes (1) bolt-on pulley VMP is proud of its growing line of pulleys. GripTec Micro technology is a micro ablation machining process applied to the ribs of the pulley giving them maximum gripping force. The multi-directional machined ridges minimize belt slippage. Manufactured in the USA, using high-quality anodized aluminum, VMP"s pulley is made with strength and durability in mind. Precision machined, this pulley has an excellent fit. Hub NOT included.

WILL ADDING A SUPERCHARGER TO MY GT OR UPGRADING MY FACTORY SUPERCHARGER ON MY COBRA, ROUSH, OR GT500 WITH A VMP TVS SUPERCHARGER RUIN MY DRIVABILITY OR ON ROAD MANNERS? Nope. Notice, we said upgrade! With our expert tuning staff and the hours of R&
D that have gone into all of our kits, we have painstakingly developed kits that help you achieve your power goals without losing drivability and the road manners you are accustomed to in the modern Mustang, GT500, and F-150.

VMP operates a modern e-commerce business focused on aftermarket automotive upgrades with customers all over the world. The company?s headquarters are in New Smyrna Beach Florida on a 12 acre campus. VMP offers custom tuning and installations in addition to the line of VMP performance parts and supporting components from quality manufacturers.

Learn More