You have no items in your shopping cart.
CDC 05-09 Mustang GT Aggressive Chin Spoiler
Engineered and Manufactured by CDC, the GT Aggressive Chin spoiler is produced using High Pressure Injection Molded technology. This urethane piece is designed to create the ultimate performance appearance and engineered as a functional piece. The CDC Aggressive style spoiler requires slight Factory Fascia modifications to create the increased air flow to after coolers or radiator. Offering in textured black or raw. The clearance of the Aggressive spoiler measured from the floor to lowest point of the Chin Spoiler on a stock height vehicle: Aggressive = 5.75". Please note: Aggressive Chin Spoiler will not work on California Special or GT500 vehicles.
Learn MoreCDC 05-09 Mustang V6 Chin Spoiler
The V6 Classic Chin Spoiler is engineered and manufactured by CDC. The V6 Chin Spoiler is made using high pressure RIM technology and urethane material. Designed to enhance the factory fascia while maintaining factory fit and finish and quality. The spoiler is available in textured black or raw. Simply install using the supplied self tapping screws and 3M Acrylic Bonding tape . Warranty - 3 years.
Learn MoreCDC 05-09 Mustang GT Classic Chin Spoiler
(Molded in Black and can be painted)
Designed and engineered by CDC, the Classic GT Chin Spoiler highlights the natural lines of the factory fascia, resulting in a stronger performance stance on 2005 to 2008 GT Mustangs. To ensure OEM quality fit and finish, CDC uses an injection molded TPO material – the same material used by Ford for the front and rear fascias. Similar to the appearance of the stock black mirror housings, the chin is molded in textured black and is designed to be installed right out of the box. The light texture can also be smoothed and painted to match the color of the vehicle. The chin installs easily using all factory mounting locations with supplied hardware and 3M Acrylic Bonding Tape. 3-year warranty.
Learn MoreCDC 05-09 Mustang Deck Lid Trim Panel (No Logo)
Heritage styling combined with today's technology and engineering resulted in the creation of this OE quality ingrained Classic Deck Lid Trim Panel. This ABS panel finishes out the style of the rear end requires no drilling, NO paint and eliminates the FAKE gas cap.
Learn MoreCDC 05-09 Mustang Deck Lid Trim Panel (With GT Logo)
Heritage styling combined with today's technology and engineering resulted in the creation of this OE quality ingrained Classic Deck Lid Trim Panel. This ABS panel finishes out the style of the rear end requires no drilling, NO paint and eliminates the FAKE gas cap.
Learn MoreCDC 05-09 Mustang V6 Billet Replacement Grille
Classic Design Concepts 05-09 V6 Billet Aluminum Grille for your Mustang. The CDC V6 Grille is a powder coated and clear coated replacement grille engineered for OE fit and finish. NO DRILLING, simply install the CDC grille using factory mounting points. The CDC replacement grille retains the factory radiator cover and factory radiator cover hardware. The CDC heritage styled grille is shown with the optional Pony emblem.
Learn MoreCDC 05-09 Mustang V6 Billet Replacement Grille
Classic Design Concepts 05-09 V6 Billet Aluminum Grille for your Mustang. The CDC V6 Grille is a powder coated and clear coated replacement grille engineered for OE fit and finish. NO DRILLING, simply install the CDC grille using factory mounting points. The CDC replacement grille retains the factory radiator cover and factory radiator cover hardware. The CDC heritage styled grille is shown with the optional Pony emblem.
Learn MoreCDC 05-09 Mustang V6 Billet Replacement Grille
Classic Design Concepts 05-09 V6 Billet Aluminum Grille for your Mustang. The CDC V6 Grille is a powder coated and clear coated replacement grille engineered for OE fit and finish. NO DRILLING, simply install the CDC grille using factory mounting points. The CDC replacement grille retains the factory radiator cover and factory radiator cover hardware. The CDC heritage styled grille is shown with the optional Pony emblem.
Learn MoreCDC 05-09 Mustang V6 Billet Style Overlay Grille
2005-1009 V6 Billet Style overlay grille. The grille comes standard as a 2-piece set with the upper and lower inserts and simply installs over the existing factory grille. A dramatic enhancement to your factory grille opening that can be installed with simple hand tools. Please note this overlay grille does not work with the V6 Pony Package grille.
Learn MoreCDC 05-09 Mustang GT Billet Replacement Grille
Classic Design Concepts Billet Aluminum Grille for your GT Mustang. The CDC Grille is a powder coated and clear coated replacement grille engineered for OE fit and finish. NO DRILLING, simply install the CDC grille using factory mounting points. The CDC replacement grille retains the factory radiator cover and factory radiator cover hardware. The CDC heritage styled grille is shown with the optional Pony emblem.
Learn MoreCDC 05-09 Mustang GT Billet Replacement Grille
Classic Design Concepts Billet Aluminum Grille for your GT Mustang. The CDC Grille is a powder coated and clear coated replacement grille engineered for OE fit and finish. NO DRILLING, simply install the CDC grille using factory mounting points. The CDC replacement grille retains the factory radiator cover and factory radiator cover hardware. The CDC heritage styled grille is shown with the optional Pony emblem.
Learn MoreCDC 05-09 Mustang GT Billet Replacement Grille
Classic Design Concepts Billet Aluminum Grille for your GT Mustang. The CDC Grille is a powder coated and clear coated replacement grille engineered for OE fit and finish. NO DRILLING, simply install the CDC grille using factory mounting points. The CDC replacement grille retains the factory radiator cover and factory radiator cover hardware. The CDC heritage styled grille is shown with the optional Pony emblem.
Learn MoreCDC 05-09 Mustang GT Billet Aluminum Lower Replacement Grille
Classic Design Concepts Lower Billet Aluminum Grille for your GT Mustang. The CDC Lower Grille is a powder coated and clear coated replacement grille engineered for OE fit and finish. NO DRILLING, simply install the CDC grille using factory mounting points.
Learn MoreCDC 05-09 Mustang GT Billet Aluminum Lower Replacement Grille
Classic Design Concepts Lower Billet Aluminum Grille for your GT Mustang. The CDC Lower Grille is a powder coated and clear coated replacement grille engineered for OE fit and finish. NO DRILLING, simply install the CDC grille using factory mounting points.
Learn MoreCDC 05-09 Mustang V6 Shaker Hood System
2005-2009 SHAKER SYSTEM is now available. This Ram Air/Cold Air Package includes all the duct work to make it fully functional. The Shaker System includes an Engine dress up cover, Cast Aluminum Scoop and all the necessary hardware, instructions and templates. In addition CDC has engineered water management systems within the shaker ductwork. The CDC Shaker System uses the factory air box so Engine flashing is not necessary. The CDC Shaker System also comes standard with a High Flow/High Performance S&B Filter. The Shaker System will use your factory hood which has a factory stamping in the hood inner, which accommodates the shaker system installation process, while maintaining the integrity of the hood. We will post updates as they are available. PLEASE NOTE: CDC'S TRIM RING DOES NOT COVER THE FACTORY HOOD SCOOP HOLES (07 FACTORY HOOD SCOOP)
CDC 05-09 Mustang Quarter Window Blackouts
Rear quarter window close outs, Charcoal headliner matched closeouts that enhance the interior appearance of the vehicles equipped with CDC smooth C-Pillar Scoops.
Learn MoreCDC Hood Pin Appearance Kit
These authentic Hood Pins are uniquely designed to eliminate the need for drilling into your hood.
- Simply adhere them to your hood using the 3M bonding tape that is standard on this Zinc Die Cast, Chrome Plated, weather resistant hood pin set.
- The pins are stainless steel to maintain a high quality appearance.
- The lanyards are coated stainless steel so they will not damage your vehicle's paint!
- Best of all, they will work on ANY CAR! Vintage, late model, domestic and imports.
INSTALLATION INSTRUCTIONS - click here
Learn MoreCDC 2010-2012 Mustang GT Chin Spoiler
Introduced in mid-2009, the '10 Mustang features a complete redesign of the body that is sure to catch a lot of attention after the success of its predecessor which reigned from '05-'09. The new model Mustang features less harsh styling with a sportier look that remains very distinguished, especially because of the front fascia. Compliment your Mustang's aggressive front end with the CDC Chin Spoiler. This component blends with the natural lines of the lower fascia, creating an intimidating appearance that retains a fresh, factory look. This chin spoiler also brings the Mustang closer to the road which greatly improves the vehicle's stance.
- Molded (textured black) in OE quality TPO material, this is truly the next generation of chin spoilers.
CDC 2010-2012 Mustang Louvered C-Pillar Scoops
Designed and Manufactured by CDC.
- The Classic Louvered C-Pillar Scoop attaches using 3M Acrylic Foam bonding tape
- NO DRILLING REQUIRED!!!
- This high OE quality part compliments the high quality style of your 2005-12 Mustang.
Learn More
CDC 2010-2012 Mustang Smooth C-Pillar Scoops
Designed and Manufactured by CDC.
- The Smooth C-Pillar Scoop installs easily using 3M Acrylic Foam bonding tape and requires NO drilling.
- This high OE quality product compliments the high quality style of your 2005-12 Mustang. Learn More
Out of stock
CDC 2010-2014 Mustang Deck Lid Trim Panel
Classic Design Concepts ALL NEW Decklid Trim Panel is designed and engineered to the same OE quality standards as is predecessor.
- Made of OE Quality Grained RIM Material and fastened with 3M acrylic bonding tape.
- Clean, classic and easy to install, you'll find this Decklid Trim Panel among the most cost effective and impressive modifications you'll ever make!
- Trim Panels are painted in textured black
Redefine the aggressive styling of your 2013 Mustang and add a level of intimidation with the all new CDC Performance Grille. This OE-quality replacement grille features a wide mouth design for an enhanced performance style that greatly cleans up the appearance of your Mustang’s front end. Using the original grille’s factory mounting points, the CDC Performance Grille connects directly with the front fascia of your 2013 Mustang for a perfect fit! This is a quick and easy modification that has the ability to completely redefine the front end of your 2013-2014 Mustang! - The CDC Performance Grille fits all Mustang V6, GT, Boss and California Special models. - IMPORTANT: Permanent modification is required to remove the factory fog lamps during installation. - Performance Grille "GT" Emblem is sold separately . - This component is made of Injection Molded black ASA material. - Includes installation instructions
Classic Design Concepts announces the release of their all new High Mount Spoiler for the 2015 Mustang Coupe. The High Mount Spoiler is one of the components in the all new Outlaw package.
Designed exclusively by CDC, the all new High Mount spoiler is engineered to look like an OE stock component with aftermarket flare, while providing a factory fit and finish.
The High Mount Spoiler is manufactured in the USA from high quality Thermo Plastic Olefin (TPO) material. It features a grained texture that for that OEM look. The High Mount Spoiler comes in a raw black finish. While you can go with the unfinished flat black look, we recommend painting it to match the color of the vehicle.
Easy installation is a hallmark of CDC components and the High Mount Spoiler is no different. Installation can be done in less than 15 minutes using basic hand tools.
CDC designs and manufactures products with enthusiast driven style. As part of the Outlaw package, the front chin spoiler can be purchased individually or combined with other components to create the style you're looking for. One at a time or all at once the choice is yours.
Learn MoreOut of stock
Designed exclusively by CDC, the all new side rockers are engineered to look like an OE stock component with aftermarket flare, while providing a factory fit and finish. The Side Rockers are functional as they funnel air to the rear brakes helping to keep them cool during use.
The Side Rockers are manufactured in the USA from high quality Thermo Plasic Olefin (TPO) material. They feature a grained texture for that OEM look. They look great in black or can be painted to match the color of the vehicle.
Installation of the rockers require removal of the factory rockers. Using factory points, installing the CDC Side Rockers can be done in 90 minutes using the hardware kit supplied.
Fits GT, V6 and Ecoboost models
Learn MoreThe Rear Spoiler is manufactured in the USA from high quality lightweight ABS (acrylonitrile butadiene styrene) for superior appearance, durability, wear and impact resistance. This spoiler comes prepped and ready for paint to match the color of the vehicle. Designed and engineered for factory fit and finish, the Rear Spoiler looks like an OE stock component with aftermarket flare.
Easy installation is a hallmark of CDC components and the Rear Spoiler is no difference. Installation can be done in just a few hours using basic hand tools.
Learn MoreRed High Visibility Reflective Tape
Set includes 5 sets of 11 graphics (1 extra set in case of damage / error when installing)
Learn MoreFrom: $495.00
To: $545.00
The Mustang convertible has been a very popular vehicle for many decades. In most cases, however, the front of the Mustang tends to make more of an impression than the side profile because a convertible lacks definition when the top is down. Enhance the flat side profile of your Mustang convertible with the Classic LightBar and give your car a sportier look that is sure to catch a whole lot of attention!
NOTE: If you are unsure of color matches, please give us a call and we can send color swatches to help match your interior.
***Not Intended for Rollover Protection***
Learn MoreFrom: $495.00
To: $595.00
LightBar w/Interior Dome Light- You no longer have to struggle to see what's in your back seat. Whether your top is up or down, this fully integrated dome light system will give you all the illumination you need with THREE bright white LED's!! Cutting edge design and pure functionality, the recessed dome light is bright, stylish and long overdue! We are taking orders TODAY!!
The Mustang convertible has been a very popular vehicle for many decades. In most cases, however, the front of the Mustang tends to make more of an impression than the side profile because a convertible lacks definition when the top is down. Enhance the flat side profile of your Mustang convertible with the Classic Light Bar and give your car a sportier look that is sure to catch a whole lot of attention! Add the interior Dome Light option to your LightBar order today for only $50!
The CDC Classic LightBar fits 2005-2014 Mustang Convertibles.
NOTE: If you are unsure of color matches, please give us a call and we can send you color swatches to match up to your interior.
***Not intended for rollover protection***
Learn MoreFrom: $475.00
To: $545.00
The Mustang convertible has been a very popular vehicle for many decades and the 2015 model will continue that tradition. In most cases, however, the front of the Mustang tends to make more of an impression than the side profile because a convertible lacks definition when the top is down. Enhance the flat side profile of your Mustang convertible with the Classic Light Bar and give your car a sportier look that is sure to catch a whole lot of attention!
The CDC Classic LightBar fits the ALL NEW 2015 Mustang Convertibles.
- The factory top effortlessly fits over our Classic LightBar and does not interfere with any factory functions.
- Our Classic LightBar attaches to B-pillars creating a sturdy mount, designed to stiffen your convertibles chassis.
The LightBar is constructed of a sturdy 1 ¼” round steel tube, with a 1/8” wall thickness. Polyurethane is then molded around the tube and hand-wrapped in vinyl, grained to match your car's interior trim.
- Our Classic LightBar bar now requires NO DRILLING to install the mounting brackets and mounting hardware making installation a breeze.
NOTE: If you are unsure of color matches, please give us a call and we can send you color swatches to match up to your interior.
***Not intended for rollover protection***
Don't be fooled by imitations, give your vehicle the quality it deserves, ask for Classic Design Concepts products by name! *
Learn MoreFrom: $495.00
To: $545.00
We have taken great care in providing the highest quality LightBar offered in today's competitive market.
CDC's LightBar is available for 90-93 Mustangs. Standard in black with LED light, also, available in other factory colors and without LED Light.
Product Material-1 1/4" Round Steel Tube with a 1/8" Wall Thickness. Poly Urethane foam molded over tube and wrapped with vinyl. Application bolts in with an estimated installation time of 3 Hours, manufactured by CDC.
NOTE: If you are unsure of color matches, please give us a call and we can send you color swatches to match up to your interior.
Note: *** 87-89 models will need to replace the rear interior trim panels with 90-93 trim panels (not included) to accept the LightBar brackets' width. It is recommended to acquire these panels first as they are difficult to find.***
***Not Intended for Rollover Protection***
Learn MoreNow available for the 2015-16 Mustang is the all new CDC Outlaw Switchback Upper Grille.
Our supremely manufactured grille is hand crafted with pride in the USA using high quality materials to ensure perfect fitment and long lasting dependability.